Lowrance HDS-9 Live Fishfinder with Active Imaging 3-1 Sonar

1. はじめに

This manual provides essential information for the installation, operation, and maintenance of your Lowrance HDS-9 Live Fishfinder with Active Imaging 3-1 Sonar. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize your experience.

The Lowrance HDS-9 Live is a high-performance marine electronics device designed to provide advanced fishfinding capabilities, detailed chartplotting, and navigation assistance. Its 9-inch LCD touchscreen display offers intuitive control and clear visibility of sonar data and nautical charts.

2. 安全情報

怪我やデバイスの損傷を防ぐために、常に次の安全上の注意事項を守ってください。

• 水への露出: Ensure all connections are properly sealed to prevent water ingress. While the device is designed for marine environments, prolonged submersion or high-pressure water jets can cause damage.
• 電源： Connect the device only to a 12V DC power source. Incorrect voltage can damage the unit. Ensure proper fuse protection is used.
• 取り付け: Securely mount the device and transducer according to the instructions to prevent detachment during operation, especially in rough conditions.
• ナビゲーション: This device is an aid to navigation. Always use official nautical charts and visual navigation techniques. Do not rely solely on the electronic chartplotter for navigation.
• トランスデューサーの配置: When installing the transducer, ensure it is placed in a location free from obstructions and turbulence for optimal sonar performance.

3. パッケージ内容

パッケージの内容をチェックして、すべてのアイテムが揃っていることを確認してください。

• Lowrance HDS-9 Live Display Unit
• Active Imaging 3-1 Transducer
• 電源ケーブル
• 取り付けブラケットとハードウェア
• ドキュメント（クイックスタートガイド、保証書）

If any items are missing or damaged, please contact your dealer or Lowrance customer support.

4. セットアップ

4.1 ディスプレイユニットの取り付け

The HDS-9 Live supports surface mounting. Choose a location on your boat that provides clear visibility, easy access to the touchscreen, and protection from excessive spray. Ensure sufficient space behind the unit for cable connections and ventilation.

1. 取り付けブラケットを配置し、ドリル穴の位置をマークします。
2. Drill pilot holes using an appropriate drill bit for your boat's material.
3. Secure the mounting bracket using the provided hardware.
4. Attach the HDS-9 Live display unit to the mounting bracket.

Figure 1: Lowrance HDS-9 Live Fishfinder display unit. This image shows the front view of the device, highlighting its 9-inch screen and sleek design, ready for marine installation.

4.2電源接続

Connect the red wire from the power cable to the positive (+) terminal of your 12V DC power source, and the black wire to the negative (-) terminal. Install an in-line fuse (recommended 3A) on the positive wire as close to the power source as possible.

4.3 トランスデューサの接続

Connect the Active Imaging 3-1 transducer cable to the corresponding sonar port on the back of the HDS-9 Live unit. Ensure the connection is secure and the locking collar is tightened to prevent water intrusion.

4.4 ネットワーク接続（イーサネット）

For connecting to other compatible Lowrance devices or a marine network, use an Ethernet cable. Plug one end into the Ethernet port on the HDS-9 Live and the other end into the network hub or another device.

5. 操作手順

5.1 電源のオン/オフ

• 電源を入れるには: Press and hold the Power button (usually located on the front or side of the unit) until the Lowrance logo appears.
• 電源を切るには: Press and hold the Power button until the power options menu appears. Select 'Power Off' or 'Shutdown'. A quick press of the power button may put the unit into standby mode.

5.2 基本的なナビゲーション（タッチスクリーン）

The HDS-9 Live features a capacitive touchscreen for intuitive control:

• タップ: 項目を選択したり、メニューを開いたり、アクションを確認したりします。
• スワイプ： Scroll through lists or pan across maps.
• ピンチしてズーム: Use two fingers to zoom in or out on charts and sonar views.
• 長押し： Access contextual menus or advanced options.

5.3 Sonar Operation (Active Imaging 3-1)

The Active Imaging 3-1 transducer provides traditional CHIRP sonar, SideScan, and DownScan Imaging. To access sonar views:

1. From the Home screen, select the 'Sonar' page.
2. Tap the menu icon to select different sonar views (e.g., 'Traditional', 'DownScan', 'SideScan').
3. Adjust settings such as sensitivity, range, and frequency from the sonar menu to optimize performance for current conditions.

5.4 GPS/Charting

The HDS-9 Live supports nautical charts for navigation. To use the chartplotter:

1. From the Home screen, select the 'Chart' page.
2. Your current position will be displayed on the chart.
3. Use the touchscreen to pan and zoom.
4. To create a waypoint, tap on the desired location on the chart.
5. To create a route, select the 'Routes' option from the menu and follow the on-screen prompts.

5.5 設定調整

Access the system settings from the Home screen to customize your device. Here you can adjust display brightness, unit preferences, network settings, and more.

6. メンテナンス

6.1 クリーニング

Regular cleaning helps maintain the device's performance and longevity:

• 画面： 柔らかくてamp cloth with fresh water to clean the screen. Avoid abrasive cleaners or solvents, which can damage the display coating.
• ユニットCasing: cを拭くasin広告付きgamp 布。
• トランスデューサー: Periodically check the transducer face for marine growth or debris. Clean gently with a soft brush and fresh water.

6.2ソフトウェアアップデート

Lowrance periodically releases software updates to improve performance, add features, and fix bugs. It is recommended to keep your device's software up to date. Visit the official Lowrance website for the latest software versions and instructions on how to perform an update.

6.3 ストレージ

When storing the device for extended periods, especially in cold climates, remove the unit from its mounting bracket and store it in a dry, temperature-controlled environment. Disconnect all cables.

7。 トラブルシューティング

If you encounter issues with your HDS-9 Live, refer to the following common problems and solutions:

• 電源なし:
  • 電源ケーブルの接続を確認してください。
  • Verify the fuse in the power line is intact.
  • バッテリーが十分に充電されていることを確認してください。
• ソナー読み取りなし:
  • トランスデューサーがユニットに正しく接続されていることを確認してください。
  • トランスデューサーの表面に障害物や海藻が付着していないか確認します。
  • システム設定で正しいトランスデューサータイプが選択されていることを確認します。
  • Adjust sonar sensitivity and range settings.
• GPSが位置を取得できません:
  • ユニットにクリアな view 空の。
  • Allow several minutes for the GPS receiver to acquire satellites.
  • Check for any metallic objects or other electronics interfering with the GPS signal.
• 画面がタッチに反応しない:
  • 画面が清潔で乾燥していることを確認してください。
  • 装置を再起動してください。
  • If wearing gloves, try operating with bare fingers or compatible touchscreen gloves.

For further assistance, contact Lowrance customer support.

8. 仕様

9.保証とサポート

9.1 保証情報

For detailed warranty information regarding your Lowrance HDS-9 Live Fishfinder, please refer to the warranty card included in your product packaging or visit the official Lowrance webサイトをご覧ください。保証条件は地域によって異なる場合があります。

9.2 カスタマーサポート

If you require technical assistance, have questions about your product, or need to report an issue, please contact Lowrance customer support. Contact details, including phone numbers and online support resources, can be found on the official Lowrance webサイト：

Visit Lowrance Support Webサイト