導入
This manual provides essential instructions for the safe and effective use of the GÜDE 55369 GHF 800 Manual Tile Cutter. Please read these instructions carefully before assembly, operation, or maintenance. Keep this manual for future reference.
安全に関する注意事項
Always prioritize safety when operating any tools. Failure to follow these instructions may result in injury or damage to the tool.
- 安全メガネや手袋などの適切な個人用保護具 (PPE) を着用してください。
- Ensure the work surface is stable, level, and clean.
- 子供や傍観者を作業エリアに近づけないでください。
- Inspect the tile cutter for any damage before each use. Do not use if damaged.
- Handle tiles carefully; edges can be sharp after cutting.
- Do not force the cutting wheel. Apply steady, even pressure.
- Ensure the tile is properly secured on the anti-slip support before cutting.
コンポーネントオーバーview
Familiarize yourself with the parts of your GÜDE GHF 800 Manual Tile Cutter.
- カッティングハンドル: 人間工学に基づいて設計されており、快適に操作できます。
- カッティングホイール: Hardened tungsten carbide wheel for precise scoring.
- ガイドレール: Provides a stable path for the cutting head.
- ベースプレート: Stable aluminum base for secure tile placement.
- Anti-slip Support: Ensures the tile remains stationary during cutting.
- Adjustable Stop/Angle Guide: For precise measurement and angled cuts.
- Fold-out Tile Supports: Extendable supports on both sides for larger tiles.
設定
Before using the tile cutter, ensure it is properly set up.
- 開梱: すべての部品をパッケージから慎重に取り出してください。輸送中の損傷がないか確認してください。
- 配置: Place the tile cutter on a stable, flat, and clean work surface. Ensure there is enough space around the cutter for safe operation and tile handling.
- Extend Tile Supports: For larger tiles, unfold the side tile supports (30 cm each) to provide additional stability.
図2: Fold-out tile support. This image shows one of the side supports extended, providing additional surface area for larger tiles. - 調整可能なストップ: Position the adjustable stop according to the desired tile dimension. Secure it firmly.
図3: Tile placement and adjustable stop. This image illustrates a tile positioned on the cutter, with the adjustable stop set for a precise cut, indicating a maximum tile size of 80x80 cm.
手術
Follow these steps for effective and safe tile cutting.
- タイルを準備する: タイルの表面をきれいにし、鉛筆かマーカーでカットしたい線をはっきりとマークします。
- タイルを配置します。 Place the tile on the base plate, aligning the marked cut line with the cutting wheel's path. Ensure the tile rests firmly against the anti-slip support and the adjustable stop.
図4: Tile positioning for a straight cut. This image shows a tile correctly placed on the cutter, ready for the scoring process. - タイルのスコア:
- Position the cutting wheel at the edge of the tile furthest from you.
- Apply firm, consistent downward pressure on the cutting handle.
- Push the cutting handle smoothly and steadily across the tile towards you in a single, continuous motion. Do not make multiple passes. A distinct scoring sound should be heard.
図5: Scoring the tile. This image focuses on the cutting wheel as it scores a line across the tile surface. - タイルを壊す:
- Once the tile is scored, position the breaking foot (part of the cutting head) directly over the scored line, near the edge of the tile closest to you.
- Apply quick, firm downward pressure on the cutting handle. The tile should snap cleanly along the scored line.
- For diagonal cuts, use the angle guide and ensure the tile is securely placed.
図6: Performing a diagonal cut. This image demonstrates the tile cutter being used to make an angled cut on a tile. - 仕上げ: Carefully remove the cut tile pieces. Edges may be sharp and may require light sanding or filing for a smooth finish.
メンテナンス
Regular maintenance ensures the longevity and performance of your tile cutter.
- クリーニング： After each use, clean the base plate, guide rails, and cutting head to remove tile dust and debris. Use a dry cloth or brush.
- 潤滑: Periodically apply a light lubricant to the guide rails and the cutting wheel axle to ensure smooth operation.
- カッティングホイール: The tungsten carbide cutting wheel is durable but will eventually wear out. Replace the cutting wheel when cuts become inconsistent or require excessive force.
図7: Hardened cutting wheel and ergonomic handle. This image provides a detailed view of the durable cutting wheel and the comfortable grip of the handle. - ストレージ： タイルカッターは、直射日光や極端な温度を避け、乾燥した清潔な場所に保管してください。
トラブルシューティング
一般的な問題とその解決策については、このセクションを参照してください。
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 不均一またはギザギザの切り口 |
|
|
| Tile does not break cleanly |
|
|
| Cutting head sticks or moves roughly |
|
|
仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | 55369 |
| 最大切削長さ | 800 mm（80 cm） |
| Maximum Tile Dimensions | 800 x 800 mm (for diagonal cuts) |
| Maximum Tile Thickness | 12ミリメートル |
| 切断ホイール直径 | 22ミリメートル |
| 切断ホイール材質 | タングステンカーバイド |
| Base Plate Material | アルミニウム |
| 製品寸法（長さ x 幅 x 高さ） | 105.4 x 86 x 39 cm |
| アイテム重量 | 7.4キログラム |
| ハンドル材質 | ポリプロピレン |
| 推奨される表面 | Ceramic, Porcelain |
| 電源 | 手動式 |
保証とサポート
保証情報や技術サポートについては、メーカーの公式ウェブサイトをご覧ください。 web購入サイトをご覧いただくか、カスタマーサービスに直接お問い合わせください。購入証明書としてレシートを保管してください。
Manufacturer: GÜDE GmbH & Co.KG
Contact information can typically be found on the product packaging or the official GÜDE webサイト。
