Surge SG60043
Surge Switchpad Pro ワイヤレス コントローラー ユーザー マニュアル
モデル: SG60043
導入
Enhance gameplay with the SURGE SwitchPad Pro Wireless Controller for the Nintendo Switch. The classic controller style and lightweight design ensures continued comfort during extended gaming sessions, while built-in dual rumble motors provide an immersive gaming experience. Additionally, the programmable Turbo button offers a competitive advantage by allowing customization of any face buttons or triggers for Turbo functionality.

Figure 1: Surge Switchpad Pro Wireless Controller and Charging Cable
設定
1. コントローラーの充電
The Surge Switchpad Pro features a built-in 550mAh rechargeable battery, providing up to 12 hours of gameplay on a full charge. Before first use, or when the battery is low, charge the controller using the provided USB-C cable.
- Connect the small end of the USB-C cable to the USB-C charge port on the top of the controller.
- Connect the larger USB-A end of the cable to a powered USB port (e.g., Nintendo Switch dock, computer, or USB wall adapter).
- The LED player indicators on the controller will illuminate to show charging status. They will turn off or change color when fully charged.

Figure 2: USB-C Charge Port Location

Figure 3: LED Player Indicators
2. Nintendo Switchとのペアリング
The Surge Switchpad Pro connects wirelessly via Bluetooth, offering a stable connection up to 25 feet away.
- Nintendo SwitchのHOMEメニューから コントローラー、 それから グリップ/順序の変更.
- While on the "Change Grip/Order" screen, press and hold the ホームボタン on the Surge Switchpad Pro for a few seconds until the player LEDs begin to flash rapidly.
- Once paired, the player LED(s) corresponding to the controller number will remain solid.
- コントローラーは使用できるようになりました。
操作手順
ボタンのレイアウトと機能
The Surge Switchpad Pro features a professional-inspired button layout, including standard Nintendo Switch controls, 4 macro buttons, and a Turbo button.

図4: 前面 View コントローラーの
- 標準ボタン: A, B, X, Y, L, R, ZL, ZR, D-Pad, Left/Right Analog Sticks, +, -, HOME, Capture.
- 6軸モーションコントロール: Compatible with motion-sensing games such as The Legend of Zelda, Mario Kart 8 Deluxe, Splatoon 2, and more.
- 4 Macro Buttons (M1, M2, M3, M4): Located on the rear of the controller. These can be programmed to execute complex button combinations with a single press.
- ターボボタン: Allows you to assign Turbo functionality to any face button or trigger, enabling rapid, automatic presses.
Programming Macro Buttons
The 4 ergonomic paddle buttons on the back of the controller can be programmed for custom macros.

Figure 5: Rear Paddle Buttons (Macro Buttons)
- を押し続けます Macro Program button (usually a small button near the macro paddles) until the indicator light flashes.
- Press the desired Macro Button (M1, M2, M3, or M4) you wish to program. The indicator light will flash slowly.
- Input the sequence of buttons you want to assign (e.g., A, B, X, Y, L, R, etc.).
- を押す Macro Program button again to save the macro. The indicator light will turn off.
- To clear a macro, repeat steps 1-2, then press the Macro Program button without inputting any sequence.
Using Turbo Functionality
Turbo 機能を使用すると、ボタンを素早く連続して入力できます。
- を押し続けます ターボボタン.
- While holding the Turbo button, press the desired action button (e.g., A, B, X, Y, L, R, ZL, ZR) once to activate Turbo for that button.
- Release both buttons. Now, holding down the assigned action button will result in rapid, repeated presses.
- To deactivate Turbo for a specific button, press and hold the ターボボタン again, then press the action button twice.
メンテナンス
クリーニング
コントローラーの外観と機能を維持するには:
- コントローラーを柔らかく乾いた布で拭いてください。
- 頑固な汚れには、軽くamp布を水で拭いてください。刺激の強い化学薬品や研磨剤入りの洗剤は使用しないでください。
- Ensure the controller is completely dry before storing or using.
バッテリーケア
内蔵充電式バッテリーの寿命を延ばすには:
- バッテリーを頻繁に完全に放電することは避けてください。
- 長期間使用しない場合は、コントローラーを涼しく乾燥した場所に保管してください。
- Charge the controller at least once every three months if not used regularly.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| コントローラーがスイッチに接続されません。 | Out of range, low battery, pairing issue. | Ensure controller is within 25ft of Switch. Charge the controller. Re-attempt pairing process (see Setup section). |
| ボタンやジョイスティックが反応しません。 | バッテリー残量が少なく、一時的なソフトウェアの不具合が発生しています。 | Charge the controller. Restart the controller by holding the HOME button until it turns off, then turn it back on. Restart the Nintendo Switch console. |
| ターボ機能が動作しません。 | プログラミングが間違っています。 | Review "Using Turbo Functionality" instructions in the Operating section and re-program the desired button. |
| Macro buttons not working as expected. | プログラミングが間違っています。 | Review "Programming Macro Buttons" instructions in the Operating section and re-program the desired macro. |
| Rumble feature is weak or absent. | Game setting, low battery. | Check in-game settings for rumble intensity. Ensure controller is fully charged. |
仕様
- モデル番号: SG60043
- 接続性: ワイヤレスBluetooth
- バッテリー: 550mAh充電式リチウムイオン(付属)
- バッテリー寿命: 最大12時間のゲームプレイ
- 運動制御: 6軸
- ランブル: デュアルランブルモーター
- 特別な機能: 4 Programmable Macro Buttons, Programmable Turbo Function
- 無線範囲: 最大25フィート
- 寸法: 7.87 x 5.59 x 2.6インチ
- 重さ: 8オンス
- メーカー: うねり
- 初回利用可能日: 4年2018月XNUMX日
保証とサポート
For warranty information or technical support, please visit the official Surge webご購入いただいたサイトをご覧いただくか、カスタマーサービス部門にお問い合わせください。保証請求の際に必要となりますので、購入証明書を保管してください。
詳しい情報とサポートについては、 Surge Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.