1. はじめに
Thank you for choosing the Master Airbrush Model TC-96T Air Compressor Kit. This professional-grade, twin-piston airbrush compressor is designed to provide consistent, pulsation-free airflow for a wide range of airbrushing applications. Featuring a 1.5-gallon air tank, pressure regulator, water trap filter, and a 6-foot braided air hose, this unit is built for reliability and performance in studios and workshops. Please read this manual thoroughly before operation to ensure safe and efficient use of your equipment.
2. 重要な安全情報
怪我や損傷のリスクを軽減するために、常に次の安全上の注意事項を守ってください。
- Read all instructions before operating the compressor.
- 電源がボリュームと一致していることを確認してくださいtagコンプレッサーに指定された電圧（120ボルト）。
- 湿った状態またはdでコンプレッサーを操作しないでくださいamp conditions. Keep it away from water.
- Always wear appropriate personal protective equipment, including eye protection, when operating airbrush equipment.
- Never point an airbrush at yourself or others.
- Ensure adequate ventilation when using paints, solvents, or cleaning agents.
- Disconnect the power plug from the outlet before performing any maintenance, cleaning, or when the compressor is not in use.
- Do not modify the compressor or its components. Use only original replacement parts.
- 手術エリアから子供やペットを遠ざけてください。
- Regularly check all connections for leaks and ensure hoses are not kinked or damaged.
- Drain the air tank regularly to prevent moisture buildup.
3.製品オーバーview
The Master Airbrush Model TC-96T is a high-performance air compressor designed for demanding airbrushing tasks. Its twin-piston design and 1.5-gallon air tank ensure a consistent, pulsation-free air supply, making it suitable for various artistic and hobby applications.
主な特徴:
- Twin-Piston Design: Delivers 40 liters/minute (1.4 CFM) airflow, capable of operating two airbrushes simultaneously.
- 1.5 Gallon Air Tank: Provides 'air-on-demand' with constant pressure and zero pulsation.
- Integrated Cooling Fans: Ensures a longer duty cycle and prevents overheating during extended use.
- 空気圧レギュレーター: Features a gauge and water trap filter for precise pressure control and moisture removal.
- 静かな動作: Rated at approximately 62 decibels, suitable for studio environments.
- ポータブルデザイン: Equipped with two adjustable handles for easy transport.
- 自動シャットオフ: Enhances energy efficiency and extends motor life.
Image: The Master Airbrush TC-96T compressor showing the pressure regulator, gauge, water trap filter, and adjustable carrying handles.
Image: Visual representation of the compressor's high-performance twin-piston system, 40 liters/minute airflow, built-in cooling fans, and suitability for various airbrushing tasks.
4. セットアップ手順
Follow these steps to set up your Master Airbrush TC-96T compressor:
- コンプレッサーを開梱します。 すべての部品をパッケージから慎重に取り出し、輸送中の損傷がないか確認してください。
- 配置: Place the compressor on a stable, level surface in a well-ventilated area. Ensure the rubber cup suction feet are securely positioned to minimize vibration.
- エアホースを接続する: Attach one end of the included 6-foot braided air hose to the air outlet port on the compressor's pressure regulator. Ensure a tight, secure connection.
- Connect Airbrush: Attach the other end of the braided air hose to your airbrush. If your airbrush has a different thread size, you may need an adapter (not included).
- 電源接続: Ensure the compressor's power switch is in the 'OFF' position. Plug the power cord into a grounded 120V AC electrical outlet.
Image: The included 6-foot braided air hose, essential for connecting the compressor to your airbrush.
Image: Close-up of the compressor's base, highlighting the 1.5-gallon steel air tank and the stabilizing rubber cup suction feet.
5. 操作手順
Once your compressor is set up, follow these steps for operation:
- 電源オン: Flip the power switch to the 'ON' position. The compressor will begin to fill the air tank. The motor will automatically shut off once the tank reaches its maximum pressure.
- 空気圧を調整する: Turn the knob on the air pressure regulator to set your desired working pressure. Observe the gauge to ensure the correct PSI/Bar.
- Check Water Trap: Before each use, check the water trap filter for accumulated moisture. Drain if necessary (refer to Maintenance section).
- エアブラシを始める: Once the desired pressure is set and the tank is full, you can begin airbrushing. The compressor will automatically cycle on and off to maintain pressure in the tank as you use air.
- 電源を切る： When finished, turn the power switch to the 'OFF' position. Disconnect the power cord from the outlet.
- 減圧: Briefly open the airbrush trigger or the tank drain valve to release any remaining air pressure from the system before storing.
6. メンテナンス
定期的なメンテナンスにより、コンプレッサーの寿命が長くなり、最適なパフォーマンスが確保されます。
日常のメンテナンス:
- Drain Water Trap: The water trap filter collects moisture from the air. To drain, ensure the compressor is off and depressurized. Unscrew the bottom of the water trap or press the release valve (depending on model) to release collected water.
- エアタンクの排水: After each use, especially in humid environments, drain any condensation from the air tank. Locate the drain valve at the bottom of the tank, open it to release water, then close it securely.
定期メンテナンス:
- クリーンエアフィルター: Periodically check and clean the air intake filter. A clogged filter can reduce compressor efficiency. Refer to the filter's specific instructions for cleaning or replacement.
- ホースと接続部の点検: Regularly check the air hose for cracks, kinks, or wear. Ensure all connections are tight and free of leaks.
- 一般的な清掃: コンプレッサーの外側を拭きますamp 布で埃やゴミを拭き取ってください。刺激の強い化学薬品や研磨剤入りの洗剤は使用しないでください。
7。 トラブルシューティング
一般的な問題とその解決策については、このセクションを参照してください。
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| コンプレッサーがオンになりません。 | No power, faulty switch, thermal overload. | Check power cord connection and outlet. Ensure switch is ON. Allow compressor to cool if it has overheated. |
| 空気圧が低い、または一定でない。 | Air leaks, clogged air filter, regulator setting too low, tank not fully pressurized. | Check all hose connections for leaks. Clean or replace air filter. Adjust pressure regulator. Allow tank to fully pressurize. |
| 空気出力に過剰な水分が含まれています。 | Water trap full, tank not drained. | Drain the water trap filter. Drain the air tank. Operate in a less humid environment if possible. |
| コンプレッサーは連続運転。 | Air leak in system, pressure switch malfunction. | Check for air leaks in hoses, connections, and airbrush. If problem persists, contact customer support. |
| 異常な騒音や振動。 | Loose components, compressor not on a level surface. | Check for loose screws or parts. Ensure compressor is on a stable, level surface. |
8. 仕様
| 特徴 | 仕様 |
|---|---|
| モデル番号 | TC-96T |
| ブランド | マスターエアブラシ |
| モーター馬力 | 0.25馬力 |
| 風量 | 40リットル/分（1.4 CFM） |
| エアタンク容量 | 1.5ガロン |
| 最大圧力 | 57 PSI (ポンド/平方インチ) |
| 巻tage | 120ボルト |
| 騒音レベル | 62デシベル |
| ホース長さ | 6 Feet (Braided) |
| アイテム重量 | 18.15 ポンド |
| 寸法（長さ×幅×高さ） | 12.2インチ x 5.4インチ x 18.2インチ |
| 追加機能 | Automatic Shut-Off, Water Trap Filter, Pressure Gauge |
9. 保証とサポート
Master Airbrush products are backed by a commitment to customer satisfaction. For specific warranty details, please refer to the documentation included with your purchase or visit the official Master Airbrush website. In case of issues or for technical assistance, please contact Master Airbrush customer support.
This product is eligible for a 30-day return/replacement policy from the date of purchase, subject to the retailer's terms and conditions.