1. はじめに
Thank you for choosing the CREWORKS 15x15 Inch 5-in-1 Heat Press Machine. This versatile machine is designed for transferring designs onto various items such as T-shirts, bags, mouse pads, mugs, hats, plates, and shoes. This manual provides essential information for safe operation, setup, and maintenance to ensure optimal performance and longevity of your heat press.
2. 重要な安全上の注意事項
- ヒートプレスは常に安定した耐熱性のある表面上で操作してください。
- Keep hands and body clear of the heating platen during operation to prevent burns. The aluminum platen is coated with temperature-resistant nylon fiberglass composite, but it still gets very hot.
- The swing-away design allows the heating element to be moved safely aside, reducing the risk of accidental contact. Utilize this feature.
- 作業スペース内の適切な換気を確保してください。
- Do not leave the machine unattended while powered on or in operation.
- 子供やペットを機械から遠ざけてください。
- 使用していないときや清掃、メンテナンスを行う前には、本機を電源コンセントから抜いてください。
- ご自身で機械の改造や修理を試みないでください。資格のあるサービス担当者にご相談ください。
3. パッケージ内容
開梱時にすべてのコンポーネントが揃っていることを確認します。
- Main Heat Press Unit (15x15 inch flat platen)
- マグプレスアタッチメント
- Cap Press Attachment
- Plate Press Attachments (2 sizes)
- 電源コード
- 取扱説明書
4.製品オーバーview
Familiarize yourself with the main components of your CREWORKS Heat Press Machine:
Figure 4.1: Main Components of the Heat Press Machine
- 圧力ハンドル: Used to lower and raise the heating platen and apply pressure.
- Height Regulator: Adjusts the distance between the heating platen and the lower platen for different material thicknesses.
- Time & Temperature Control Box: Digital display for setting and monitoring temperature and time.
- 電源スイッチ： マシンの電源をオン/オフにします。
- Spring-Loaded Bolts: Provide even pressure distribution across the platen.
- ヒートパッド: The lower silicone pad that supports the item being pressed.
- スライドレール: Allow the lower platen to slide out for easier placement of items and safer operation.
Figure 4.2: Easy Adjustment Knob for Pressure and Height
The easy adjustment knob allows you to quickly raise or lower the heat pad up to 15 inches to accommodate larger or thicker objects.
Figure 4.3: Intelligent LCD Control Box
The control box features a digital display for precise temperature (up to 570°F / 300°C) and time (up to 999 seconds) settings.
5. セットアップ
- 開梱： パッケージからすべてのコンポーネントを慎重に取り出します。
- 配置: Place the main heat press unit on a sturdy, level, and heat-resistant workbench or table. Ensure there is enough space around the machine for the swing-away function.
- 電源接続: 電源コードをマシンに接続し、次にアースされた 110V 電源コンセントに接続します。
- Attachment Installation (if applicable): For mug, cap, or plate pressing, attach the corresponding heating element following the instructions provided with each attachment. Ensure secure connection.
6. 操作手順
This section covers general operation and specific instructions for different attachments.
6.1. 一般的な操作
- 電源オン: Flip the main power switch to the 'ON' position. The control box will light up.
- 設定温度: Press the 'SET' button on the control box. Use the up/down arrows to adjust the desired temperature. Press 'SET' again to confirm.
- 時間設定: Press the 'SET' button twice. Use the up/down arrows to adjust the desired time in seconds. Press 'SET' again to confirm.
- 予熱： Allow the machine to preheat until it reaches the set temperature. The 'OUT' indicator light will turn off when the target temperature is reached.
- 圧力を調整する: Use the height regulator knob to adjust the pressure. Turn clockwise for more pressure, counter-clockwise for less. Test with a scrap material to ensure appropriate pressure.
6.2. T-Shirt/Flat Item Pressing
Figure 6.1: T-Shirt Pressing with the Main Unit
- フラットプラテンが取り付けられていることを確認します。
- Preheat the machine to the recommended temperature for your transfer material (e.g., 320-360°F).
- Slide out the lower platen. Place the T-shirt or flat item onto the silicone pad, ensuring it is smooth and free of wrinkles.
- Place your transfer design onto the item. Cover with a Teflon sheet or parchment paper if required by your transfer material.
- Swing the heating platen over the item and lower the pressure handle to engage the press.
- The timer will automatically start. Once the time elapses (e.g., 30 seconds), lift the pressure handle and swing the heating platen away.
- Carefully remove the transfer paper (hot or cold peel, as per transfer instructions) and then the item.
Figure 6.2: Visual Guide for T-Shirt Pressing
6.3. Mug, Cap, and Plate Pressing
Figure 6.3: Mug, Cap, and Plate Attachments
To use the mug, cap, or plate attachments, first replace the flat platen with the appropriate attachment. Ensure it is securely fastened. Follow the general operating steps for setting temperature and time, then:
- マグプレス: Place the transfer paper around the mug. Insert the mug into the mug press attachment and close the clamp. Recommended temperature: 330-380°F for 30 seconds.
- キャッププレス: Place the transfer paper onto the cap. Position the cap on the cap press attachment. Lower the heating element onto the cap. Recommended temperature: 330-350°F for 40 seconds.
- プレートプレス: Place the transfer paper onto the plate. Position the plate on the plate press attachment. Lower the heating element onto the plate. Recommended temperature: 330-380°F for 30 seconds.
Note: Specific temperature and time settings may vary depending on the transfer paper, ink, and material used. Always refer to the recommendations of your transfer material supplier.
6.4. 公式製品ビデオ
Video 6.4.1: Official demonstration of the CREWORKS 5-in-1 Heat Press Machine's features and applications.
7. メンテナンス
- クリーニング： Ensure the machine is unplugged and completely cool before cleaning. Wipe down the heating platen and other surfaces with a soft, damp 布で拭いてください。研磨剤や溶剤は使用しないでください。
- Silicone Pad Care: Regularly inspect the silicone pad for wear or damage. Replace if necessary to ensure even pressure.
- ストレージ： 使用していないときは、機械を乾燥したほこりのない環境に保管してください。
8。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 不均一な熱伝達 | Uneven pressure; damaged silicone pad; faulty heating element. | Adjust pressure knob; inspect and replace silicone pad; contact support if heating element is faulty. |
| 機械が加熱しない | Power issue; faulty heating element; control box malfunction. | Check power connection and outlet; contact support. |
| 転写が付着しない | Incorrect temperature or time; insufficient pressure; incorrect transfer material. | Verify settings with transfer material instructions; adjust pressure; ensure correct transfer type for material. |
| Machine tilts when swinging away | Machine not secured; unstable surface. | Ensure machine is bolted down or placed on a heavy, stable surface to prevent tilting. |
ここに記載されていない問題が発生した場合、または提案された解決策で問題が解決しない場合は、カスタマー サポートにお問い合わせください。
9. 仕様
- 巻tage: 110ボルト
- ワットtage: 1400ワット
- 製品寸法: 19.5 x 15 x 15インチ
- 商品の重量: 42ポンド
- モデル番号: HPM-P-CREWORKS
- ブランド： クレワークス
- 材料： 金属、プラスチック
- 色： 黒
- 上限温度定格: 華氏570度（摂氏300度）
10. 保証とサポート
For warranty information, please refer to the documentation included with your purchase or contact CREWORKS customer service. If you require technical assistance or have questions regarding your heat press machine, please reach out to our support team through the official CREWORKS website or your retailer's customer service portal.