導入
This manual provides essential information for the safe installation, operation, and maintenance of your Lithonia Lighting Basics LED Emergency Light (Model EU2C M6). Please read these instructions thoroughly before installation and retain them for future reference. This emergency light is designed to provide reliable illumination during power outages in commercial and industrial settings.
重要な安全上の注意事項
電気機器を使用するときは、次のような基本的な安全上の注意事項を必ず守ってください。
- すべての安全に関する指示を読んでそれに従ってください。
- 屋外では使用しないでください。
- ガスヒーターや電気ヒーターの近くに設置しないでください。
- 機器は、tにさらされにくい場所と高さに取り付ける必要があります。amp権限のない人員による操作。
- 製造元が推奨していない付属機器を使用すると、安全でない状態が発生する可能性があります。
- この機器を本来の用途以外には使用しないでください。
- この機器のメンテナンスは、資格のあるサービス担当者のみが行う必要があります。
- 保守を行う前に、AC電源を切断してください。
パッケージ内容
インストールを開始する前に、すべてのコンポーネントが揃っていることを確認してください。
- LED Emergency Light Fixture
- LEDレンズ
- 取り付け金具
- 充電式バッテリー（プリインストール）
セットアップとインストール
The Lithonia Lighting Basics LED Emergency Light is designed for wall-mount installation only, compatible with universal J-box setups. Ensure all local and national electrical codes are followed during installation.
Mounting Location and Spacing
For optimal performance and code compliance, mount the fixture no higher than 8 feet from the floor. For adequate illumination along a 3-foot path of egress, fixtures should be spaced no farther apart than 14 feet. For a 6-foot path of egress, spacing should not exceed 11 feet. Always consult NFPA 101 Life Safety Code and local building codes for specific requirements.
Image: The Lithonia Lighting Basics LED Emergency Light, showing its dual adjustable LED lamp heads and compact design. This unit is ideal for small spaces and provides reliable emergency lighting.
配線手順
The unit operates on either 120V or 277V AC input. Connect the appropriate power supply wires to the fixture's wiring. The internal rechargeable nickel-cadmium battery is typically pre-installed and connected. Ensure all connections are secure and insulated.
ビデオ: このビデオでは、view of the Lithonia Lighting EU2C Emergency Light, demonstrating its features and suitability for various applications. It highlights the compact design and adjustable lamp 頭。
Video: This video offers a detailed product overview of emergency lighting, including discussions on code requirements, illumination standards, and proper fixture spacing to ensure life safety compliance. It compares different product families and their applications.
バッテリーの初期充電
After installation and connecting to AC power, allow the unit to charge for a minimum of 24 hours to ensure the battery is fully charged and ready for emergency operation. The status indicator light will typically be green when charging and fully charged.
操作手順
The Lithonia Lighting Basics LED Emergency Light operates automatically.
通常操作
When AC power is present, the unit's battery will be charging, and the status indicator light will be illuminated (typically green). The LED lamp heads will remain off.
緊急時の操作
Upon loss of AC power, the unit will automatically switch to battery backup mode, and the LED lamp heads will illuminate. The unit provides a minimum of 90 minutes of illumination during a power outage.
Test Switch and Status Indicator
A test switch is located on the front of the unit. Pressing this switch simulates a power outage, causing the LED lamp heads to illuminate, allowing for manual verification of battery and lamp functionality. The status indicator light provides visual confirmation of the unit's operational status (e.g., charging, fully charged, fault).
画像: クローズアップ view of the emergency light, highlighting the test switch and the status indicator light. These features allow for easy manual testing and provide visual feedback on the unit's operational state.
メンテナンス
Regular maintenance ensures the continued reliability of your emergency light.
定期テスト
Perform a monthly 30-second test by pressing the test switch. The LED lamp heads should illuminate. Conduct an annual 90-minute discharge test to ensure the battery provides the required backup duration. Self-diagnostic models perform these tests automatically and indicate any faults.
バッテリーケア
The unit uses a long-lasting, maintenance-free nickel-cadmium battery. While designed for durability, batteries have a finite lifespan. If the unit fails to provide 90 minutes of illumination during an annual test after a full 24-hour charge, the battery may need replacement. Contact qualified service personnel for battery replacement.
クリーニング
Clean the exterior of the unit and lamp heads periodically with a soft, damp 布で拭いてください。研磨剤や溶剤は使用しないでください。
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| LEDXNUMXamp heads do not illuminate during power outage またはテスト。 | No AC power, discharged battery, faulty battery, faulty lamp 頭。 | Verify AC power. Allow 24-hour charge. Test battery. Replace battery or unit if necessary. |
| Status indicator light is off or red. | No AC power, battery fault, unit fault. | Verify AC power. Allow 24-hour charge. If fault persists, contact service personnel. |
| Short emergency run time. | バッテリーが完全に充電されていない、バッテリーが老朽化している。 | Ensure 24-hour charge. Replace battery if run time remains short. |
For issues not resolved by the above steps, contact qualified service personnel.
仕様
- モデル： EU2C M6
- ブランド： リトニア照明
- 寸法: 10-1/8" W x 5-3/8" H x 3-3/4" D (25.7cm W x 13.7cm H x 9.5cm D)
- 電源: 120V/277V AC, 50/60Hz input; Internal rechargeable Nickel-Cadmium battery
- 光出力: Dual adjustable 1W LED lamp heads, 5000K-9000K CCT, 90 Lumens
- 緊急実行時間: 最低90分
- 工事： Injection-molded, flame-retardant thermoplastic housing
- 取り付け: Wall-mount only, universal J-box compatibility
- 動作温度: 50°F–104°F（10°C–40°C）
- 認定: UL Listed, NFPA 101, OSHA, FCC, NEC, CEC Title 20 compliant
Image: A diagram illustrating the dimensions of the Lithonia Lighting Basics LED Emergency Light, providing measurements for width, height, and depth for installation planning.
保証
This Lithonia Lighting product is covered by a 2-year limited warranty. For full warranty details, please refer to the documentation included with your product or visit the manufacturer's webサイト。
サポート
For technical assistance, troubleshooting, or warranty claims, please contact Lithonia Lighting customer support. Contact information can typically be found on the product packaging or the official Lithonia Lighting webサイト。