Homra Qubix 70 Liter Sensor Recycling Bin Instruction Manual

1.製品オーバーview

The Homra Qubix 70 Liter Sensor Recycling Bin is designed for efficient and hygienic waste separation. This stainless steel bin features a touchless sensor-operated lid and three internal compartments, making it ideal for modern kitchens and offices.

主な特徴:

• Hygienic Sensor Operation: The lid opens automatically when motion is detected within 15-20 cm, allowing for touch-free waste disposal.
• Three Compartments: Designed for effective waste separation, with capacities of 22 liters, 22 liters, and 24 liters, totaling 68 liters.
• Fingerprint-Resistant Stainless Steel: Constructed from brushed stainless steel, providing a sleek appearance and resistance to fingerprints and stains.
• ソフトクローズ蓋: The lid closes silently and automatically after 5 seconds of no motion, preventing unpleasant odors from escaping.
• 耐久性のある構造: 高品質の素材により、長期間にわたるパフォーマンスが保証されます。

Image: The Homra Qubix 70 Liter Sensor Recycling Bin in a kitchen setting, showcasing its modern design and stainless steel finish.

2. 安全に関する注意事項

• 使用前にすべての指示を読み、将来の参考のために保管してください。
• この機器は屋内専用です。
• Do not immerse the lid or any electrical components in water or other liquids.
• 適切な動作を確保するために、センサー領域を障害物から解放しておいてください。
• Use only the specified battery type (4 x D batteries). Do not mix old and new batteries or different types of batteries.
• 使用済みバッテリーは地域の規制に従って責任を持って廃棄してください。
• Do not force the lid open or closed manually, as this may damage the sensor mechanism.
• Keep out of reach of children and pets to prevent accidental activation or injury.

3. パッケージ内容

• 1 x Homra Qubix Sensor Recycling Bin (Stainless Steel Body)
• センサー蓋アセンブリ x 1
• 3 x Inner Compartments (2x 22L, 1x 24L)
• 1 x Inner Ring for trash bag retention
• ユーザーマニュアル x 1

4. セットアップ手順

1. バッテリーの取り付け:

   Locate the battery compartment on the underside of the lid. Insert 4 new D-size batteries, ensuring correct polarity (+/-). Close the battery compartment securely.

2. Insert Inner Compartments:

   Place the three inner compartments into the main bin body. Ensure they fit snugly and are correctly oriented.

   

   画像: 分解図 view of the Homra Qubix bin showing the lid, inner ring, and three separate compartments.
3. ゴミ袋を取り付ける:

   Place a trash bag into each inner compartment. Secure the bag by folding the top edge over the inner ring and then placing the inner ring back into the compartment to hold the bag in place.

4. 蓋を閉める:

   Carefully place the sensor lid onto the main bin body, ensuring it is properly aligned and seated.

5. 操作手順

5.1 Automatic Sensor Operation

The Homra Qubix bin features an infrared motion sensor for hands-free operation.

• To open the lid, simply wave your hand or an object within 15-20 cm above the sensor located on the front of the lid.
• 蓋は自動的に開き、約 5 秒間開いたままになります。
• After 5 seconds of no motion detection, the lid will close silently due to the soft-close mechanism.
• If motion is detected again during the closing cycle, the lid will reopen.

Image: A person disposing of waste into the Homra Qubix bin, demonstrating the hands-free sensor operation. A close-up shows the 'OPEN' and 'CLOSE' buttons on the lid.

5.2 Manual Operation (OPEN/CLOSE Buttons)

For extended opening or manual control, use the buttons on the lid:

• を押す 開ける button to keep the lid open for a longer duration. The lid will remain open until you press the 近い ボタン。
• を押す 近い button to close the lid manually when it is in the open position.

5.3 Waste Separation

Utilize the three internal compartments for effective waste separation. Common uses include:

• Organic Waste (e.g., food scraps)
• Plastics and Packaging
• General Waste or Paper

Image: A person placing a can into one of the compartments of the Homra Qubix bin, with icons indicating different waste types (fish bones for organic, bottle for plastic, box for paper/cardboard).

6. メンテナンス

6.1 Cleaning the Bin

• 外観： ステンレススチールの外側は、柔らかくて乾いた布で拭いてください。amp cloth and a mild, non-abrasive cleaner. Dry thoroughly with a soft cloth to maintain its fingerprint-resistant finish. Do not use harsh chemicals or abrasive pads.
• Interior Compartments: Remove the inner compartments and wash them with warm soapy water. Rinse thoroughly and dry completely before placing them back into the bin.
• 蓋： 広告でふたを拭くamp cloth. Do not submerge the lid in water. Ensure the sensor area is clean and free of dust or debris.

6.2 電池の交換

蓋の動作が遅くなったり不安定になった場合は、電池を交換する時期です。

1. Turn off the power switch (if available, usually near the battery compartment).
2. Open the battery compartment on the underside of the lid.
3. Remove the old D-size batteries and dispose of them properly.
4. Insert 4 new D-size batteries, ensuring correct polarity.
5. Close the battery compartment securely and turn on the power switch.

7。 トラブルシューティング

8. 仕様

Image: Diagram showing the approximate dimensions of the Homra Qubix bin body: 32.5 cm depth, 53 cm width, and 67 cm height. Note: The overall product height including the lid is 93 cm.

Image: Close-up of the Homra Qubix bin lid open, with a graphic indicating the internal capacities: two compartments of 22 liters each and one compartment of 24 liters.

9. 保証とサポート

Homra products are manufactured to high-quality standards. For warranty information, please refer to the documentation provided at the time of purchase or contact Homra customer support.

If you encounter any issues or have questions regarding your Homra Qubix Sensor Recycling Bin, please contact our customer support team:

• オンラインサポート： Visit the official Homra webFAQ とサポート リソースのサイト。
• メールサポート: 連絡先メールアドレスについては購入書類を参照してください。
• 電話サポート: Refer to your purchase documentation for contact number.

Please have your model number (HOM20257) and purchase date ready when contacting support.