QSC CP8 8インチコンパクトパワードスピーカー取扱説明書

1. はじめに

The QSC CP8 8-Inch Compact Powered Loudspeaker is designed for high performance, superior quality, and lasting reliability. This ultra-compact and highly portable loudspeaker features a 1000-Watt peak power Class-D amplifier module, matching transducers, and advanced DSP for exceptional sound quality. It is suitable for various applications including main PA, stage monitor, or instrument amplification。

2. 主な特徴

• Compact and powerful performance; Light weight and highly portable.
• 1000 Watt peak power Class-D amplifierモジュール。
• Easily selected contours for commonly-used applications.
• Advanced DSP with Intrinsic Correction for superior sound quality and speaker protection.
• Directivity Matched Transition (DMT) for consistent frequency response across the entire coverage area.
• Professional appearance looks great in any application.
• Use for main PA, stage monitor, or instrument amplifier with the option to elevate the speaker via the 35 mm pole socket.

3. セットアップ

Before operating your QSC CP8 loudspeaker, ensure it is placed on a stable surface or mounted securely. The speaker can be used in various orientations: floor standing, as a stage monitor, or mounted on a speaker pole.

図1: 前面 view of the QSC CP8 loudspeaker, showcasinコンパクトなデザインと保護グリルを備えています。

Figure 2: Rear panel of the QSC CP8 loudspeaker, detailing the input/output connections, gain controls, and DSP contour settings.

3.1 電源の接続

1. 背面パネルの電源スイッチが「オフ」の位置になっていることを確認します。
2. Connect the provided power cord to the AC inlet on the rear panel.
3. 電源コードのもう一方の端を適切な AC 電源コンセントに差し込みます。

3.2オーディオ接続

1. Connect your audio source (mixer, microphone, instrument, etc.) to the 'MIC/LINE' or 'LINE' input jacks on the rear panel.
2. Use the 'MIX OUT' XLR connector to send a mixed signal to another CP8 loudspeaker or a subwoofer.

4. 操作手順

4.1 電源のオン/オフ

1. To power on, flip the power switch on the rear panel to the 'ON' position. The power LED on the front of the speaker will illuminate.
2. 電源を切るには、電源スイッチを「OFF」の位置に切り替えます。

4.2 Adjusting Volume and Gain

• Use the 'GAIN A+B' and 'GAIN C' knobs on the rear panel to adjust the input level for each channel. Start with the gain set low and gradually increase it to avoid distortion.
• The 'LIMITER' LED indicates when the internal limiter is active. Reduce the input gain if this LED is frequently lit.

4.3 DSP Contours

The CP8 features selectable DSP contours to optimize sound for different applications:

• ディフォルト： General purpose setting.
• DANCE: Enhanced bass response for music playback.
• 外部サブ: Optimized for use with an external subwoofer.
• フロアモニター: Reduces low-frequency build-up for stageモニタリング。
• スピーチ： 音声の明瞭度を高めます。

Select the appropriate contour using the switch on the rear panel.

4.4 Bluetooth接続

The QSC CP8 supports Bluetooth for wireless audio streaming. Refer to the detailed instructions in the full user manual for pairing procedures with your device.

5. メンテナンス

• クリーニング： Use a soft, dry cloth to clean the exterior of the loudspeaker. Avoid using abrasive cleaners or solvents.
• ストレージ： Store the loudspeaker in a cool, dry place away from direct sunlight and extreme temperatures.
• 取り扱い： Always use the integrated handles when moving the loudspeaker. Avoid dropping or subjecting the unit to severe impacts.

6。 トラブルシューティング

• 音が出ない: Check all power and audio connections. Ensure the gain controls are set appropriately and the audio source is active. Verify the correct DSP contour is selected.
• 歪んだ音: Reduce the input gain. If the 'LIMITER' LED is constantly lit, the input signal is too high. Check the audio source for distortion.
• 電力の問題: 電源コードがしっかりと接続され、電源コンセントが機能していることを確認してください。

7. 仕様

8. 箱の中身

• QSC CP8 8-Inch Compact Powered Loudspeaker
• ユーザーマニュアル
• 電源コード

9. 保証とサポート

The QSC CP8 8-Inch Compact Powered Loudspeaker is protected by a global 3-year warranty with product registration. For detailed warranty information, technical support, or service inquiries, please visit the official QSC webサイトまたは顧客サービス部門に連絡してください。

追加のリソースと製品情報については、 AmazonのQSCストア.