導入
This manual provides essential instructions for the safe and efficient use of your V-TAC 18W 12V 1.5A Plug & Play Power Supply. Please read this manual thoroughly before installation and operation, and retain it for future reference.
安全に関する注意事項
- Ensure the power supply is disconnected from the mains before any installation or maintenance.
- Do not expose the power supply to direct water spray or immersion. The IP44 rating indicates protection against solid objects larger than 1mm and splashing water from any direction, but it is not waterproof.
- ボリュームを確認するtage and current requirements of your device match the output specifications of this power supply (12V DC, 1.5A).
- Do not overload the power supply. The maximum output is 18W.
- Keep the power supply away from heat sources and flammable materials.
- Do not attempt to open or modify the power supply. There are no user-serviceable parts inside.
- If the power supply or its cable is damaged, discontinue use immediately and replace it.
製品終了view
The V-TAC 18W 12V 1.5A Power Supply is designed to provide stable DC power for various electronic devices. It features a 2.1mm DC jack for plug-and-play connectivity and is housed in a durable plastic body. The IP44 rating ensures protection against dust and splashing water, making it suitable for certain outdoor or semi-exposed applications.
Image: The V-TAC power supply, highlighting its EU plug, 12V DC output, and IP44 dust and moisture resistance rating.
This power supply incorporates built-in protection features, including short circuit protection, overload protection, and an EMI filter to ensure a stable output voltage and reliable operation.
Image: The power supply, illustrating its internal features such as a built-in EMI filter, short circuit protection, overload protection, and stable output voltage.
The compact design allows for easy integration into various setups.
Image: The V-TAC power supply showing its physical dimensions: 73mm length, 43mm height, and 27mm width.
設定
- 開梱： 電源装置をパッケージから慎重に取り出します。
- 検査: Check the power supply and its cable for any visible damage. Do not use if damaged.
- デバイスに接続します: Insert the 2.1mm DC jack of the power supply into the corresponding power input port of your 12V DC compatible device. Ensure a secure connection.
- 電源に接続します: Plug the EU 2-pin plug of the power supply into a standard 100-240V AC wall outlet.
- 確認する： Confirm that your device powers on correctly.
操作手順
Once properly connected, the power supply will deliver a stable 12V DC output to your device. No further user interaction is required for operation. The power supply is designed for continuous use within its specified limits.
メンテナンス
- クリーニング： 清掃する前に、電源プラグをコンセントから抜いてください。表面は柔らかく乾いた布で拭いてください。液体クリーナーや溶剤は使用しないでください。
- ストレージ： Store the power supply in a cool, dry place when not in use. Avoid extreme temperatures and high humidity.
- 検査： Periodically check the cable and connectors for any signs of wear or damage.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| デバイスの電源が入らない | No power from wall outlet 接続が緩い 間違ったボリュームtage/現在 Damaged power supply/cable | 別のデバイスで壁のコンセントを確認する すべての接続が安全であることを確認します Verify device requirements match power supply specs Replace power supply if damaged |
| Power supply feels hot | 通常操作 オーバーロード 換気が悪い | Some warmth is normal. Ensure it's not excessively hot. Check if the connected device exceeds 18W. Reduce load. Ensure adequate airflow around the power supply. |
| Device flickering or unstable | 電力不足 故障したデバイス | Ensure device power requirements are met. Consider a higher wattage power supply if needed. Test the device with another compatible power source. |
仕様
| ブランド | V-TAC |
| モデル番号 | VT-23019 |
| 部品番号 | 3237 |
| 電力（ワットtage) | 18ワット |
| 入力ボリュームtage | 100-240V AC, 50-60 Hz (Standard EU Mains) |
| 出力巻tage | 12V DC |
| 出力電流 | 1.5A |
| コネクタタイプ | 2.1mmDCジャック |
| 電源プラグタイプ | Type C/EF (2-pin EU) |
| 材料 | プラスチック |
| 色 | 黒 |
| 特集 | IP44 (Dust & Splash Water Resistant), Built-in EMI Filter, Short Circuit Protection, Overload Protection |
| コンプライアンス | CE |
| 取り付けタイプ | Wall-wart style (plugs directly into wall outlet) |
| 対応デバイス | Devices requiring 12V DC, 1.5A power with a 2.1mm DC jack (e.g., LED strips, CCTV cameras, routers, small electronics) |
保証
V-TAC products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty information provided at the point of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.
サポート
If you encounter any issues or have questions regarding your V-TAC 18W 12V 1.5A Power Supply that are not addressed in this manual, please contact your retailer or visit the official V-TAC website for customer support and further assistance.
V-TAC Webサイト： www.v-tac.eu