XIAOMI AC-M4-AA

XIAOMI Mi Air Purifier 2S AC-M4-AA User Manual

Model: AC-M4-AA

1. はじめにview

The Xiaomi Mi Air Purifier 2S AC-M4-AA is designed to improve indoor air quality by efficiently filtering out pollutants. This intelligent air purifier is suitable for rooms up to 37m² and features a Clean Air Delivery Rate (CADR) of 310m³ per hour. It offers smart connectivity for app control and integrates with voice assistants for convenient operation, providing real-time air quality monitoring via its OLED display.

2 製品の特徴

  • European Version for compliance with regional standards.
  • Smart air purifier with Wi-Fi connectivity and mobile app control (Mi Home app).
  • Effective for rooms up to 37m² (approximately 398 sq ft).
  • High air purification capacity of 310m³/h CADR.
  • Integrated OLED display for real-time air quality (PM2.5), temperature, humidity, and filter status.
  • Equipped with a high-efficiency HEPA filter for comprehensive air purification.
  • Low noise operation, especially in Night Mode (as low as 32 dB).
  • Voice control compatibility with supported smart home platforms.

3. パッケージ内容

パッケージにすべてのアイテムが揃っていることを確認します。

  • Xiaomi Mi Air Purifier 2S (AC-M4-AA)
  • 電源ケーブル
  • ユーザーマニュアル
  • HEPA Filter (pre-installed or separately packaged)

4. 安全に関する注意事項

安全な操作を確保し、損傷を防ぐために、次の安全ガイドラインを読んで従ってください。

  • Always unplug the air purifier before cleaning, maintenance, or moving it.
  • Do not block the air inlet or outlet vents. Maintain at least 20 cm (8 inches) clearance from walls and other objects.
  • Use only the power adapter provided with the device. Ensure the voltage はお住まいの地域の電源に適合します。
  • Do not operate the air purifier in wet or humid environments, such as bathrooms. Keep it away from water and other liquids.
  • この機器は、安全に責任を負う人物による機器の使用に関する監督または指示がない限り、身体的、感覚的、または精神的能力が低下している人、あるいは経験と知識が不足している人(子供を含む)による使用を想定していません。
  • 吸込口や吹出口に指や異物を入れないでください。
  • Do not use the air purifier near heat sources, flammable gases, or volatile substances.
  • 電源コードが損傷した場合は、危険を回避するために、製造元、サービス代理店、または同様の資格を持つ担当者が交換する必要があります。

5. セットアップ

Follow these steps to set up your Xiaomi Mi Air Purifier 2S:

  1. デバイスを開梱します。 Carefully remove the air purifier from its packaging. Remove any protective films or tapes.
  2. フィルターのインストール/チェック: Open the filter compartment cover, usually located at the back or bottom of the unit. Ensure the HEPA filter is correctly seated and any plastic packaging around the filter is removed. Close the cover securely.
  3. 浄水器の位置: Place the air purifier on a flat, stable surface. Ensure there is at least 20 cm (8 inches) of clear space around all sides and above the unit for optimal air circulation.
  4. 接続電源: Plug the power cable into the power port on the back of the purifier, then plug the other end into a suitable electrical outlet.
  5. Mi Homeアプリをダウンロード: Scan the QR code in the manual or search for "Mi Home" in your smartphone's app store (Google Play Store or Apple App Store). Download and install the app.
  6. アプリに接続します: Open the Mi Home app, create an account or log in. Follow the in-app instructions to add your Xiaomi Mi Air Purifier 2S. This typically involves selecting the device, connecting to its temporary Wi-Fi hotspot, and then connecting it to your home Wi-Fi network (2.4GHz only).
Xiaomi Mi Air Purifier 2S front view with OLED display

画像: 正面 view of the Xiaomi Mi Air Purifier 2S, showing the main body and the circular OLED display.

Xiaomi Mi Air Purifier 2S top-down view showing fan grille

画像: トップダウン view of the Xiaomi Mi Air Purifier 2S, highlighting the fan grille and control buttons on the top surface.

6. 操作手順

Your air purifier can be operated via the physical buttons on the unit or through the Mi Home app.

6.1. 物理ボタンの使用

  • 電源ボタン: Press the power button on the top of the unit to turn the air purifier on or off.
  • モードボタン: Press the mode button (often integrated with the power button or a separate button) to cycle through operating modes: Automatic, Night, and Manual.

6.2. Using the Mi Home App

The Mi Home app provides comprehensive control and monitoring features:

  • リモートコントロール: Turn the purifier on/off, change modes, and adjust fan speed from anywhere.
  • リアルタイム監視: View current PM2.5 levels, temperature, and humidity in your room.
  • スケジュール: Set schedules for the purifier to turn on/off or change modes automatically.
  • フィルターステータス: Monitor the remaining lifespan of your filter and receive notifications when it's time for replacement.
  • 設定: Adjust display brightness, enable/disable sounds, and other device-specific settings.

6.3。 動作モード

  • 自動モード: The purifier intelligently adjusts its fan speed based on the real-time air quality detected by its sensors.
  • ナイトモード: Operates at the lowest fan speed with minimal noise and a dimmed OLED display to ensure undisturbed sleep.
  • 手動モード: Allows you to manually select a desired fan speed or purification intensity.

6.4. OLEDディスプレイ情報

The circular OLED display provides key information at a glance:

  • PM2.5濃度: Shows the current particulate matter level in µg/m³.
  • 温度: Displays the ambient room temperature.
  • 湿度: Shows the relative humidity level.
  • Wi-Fiステータス: Indicates connection status to your home network.
  • 動作モード: Shows the currently active purification mode.
  • フィルターの寿命: Displays the remaining percentage of the filter's life.
Xiaomi Mi Air Purifier 2S in a living room setting next to a couch

Image: The Xiaomi Mi Air Purifier 2S positioned in a modern living room, demonstrating its compact design and how it blends with home decor.

7. メンテナンス

定期的なメンテナンスにより、最適なパフォーマンスが確保され、空気清浄機の寿命が延びます。

7.1. フィルターの交換

The HEPA filter has a limited lifespan, typically 6-12 months, depending on usage and air quality. The Mi Home app and the OLED display will indicate when the filter needs replacement.

  1. Unplug the Purifier: フィルターを交換する前に必ず電源を切ってください。
  2. フィルターコンパートメントを開く: Locate and open the filter compartment cover (usually at the back or bottom).
  3. 古いフィルターを削除: 使用済みのフィルターは慎重に引き出し、地域の規制に従って廃棄してください。
  4. 新しいフィルターを挿入: Place a new, genuine Xiaomi HEPA filter into the compartment, ensuring it is correctly oriented and seated.
  5. カバーを閉じる: フィルター室のカバーをしっかりと閉じます。
  6. Reset Filter Lifespan: After replacement, open the Mi Home app and follow the prompts to reset the filter lifespan counter. This ensures accurate tracking of the new filter's usage.
Xiaomi Mi Air Purifier 2S rear view フィルターコンパートメントを表示

画像: 背面 view of the Xiaomi Mi Air Purifier 2S, illustrating the location of the filter compartment cover for maintenance.

7.2. Cleaning the Purifier

  • 外装清掃: Wipe the exterior surfaces of the air purifier with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
  • 空気入口/出口グリル: Use a soft brush or a vacuum cleaner with a brush attachment to gently clean dust and debris from the air inlet and outlet grilles.
  • Laser Particle Sensor: Periodically clean the laser particle sensor, usually located on the back of the unit. Refer to the detailed manual or Mi Home app for specific instructions on how to access and clean this sensor, as it is crucial for accurate air quality readings.

8。 トラブルシューティング

空気清浄機に問題が発生した場合は、次の一般的な問題と解決策を参照してください。

問題考えられる原因解決
デバイスの電源が入らないPower cable not connected; Filter compartment not closed properly; Power outlet issue.Ensure power cable is securely plugged in. Close the filter compartment cover completely. Test the power outlet with another device.
No Wi-Fi connection / App control not workingIncorrect Wi-Fi password; Router too far; 5GHz Wi-Fi network; App pairing issue.Ensure your Wi-Fi network is 2.4GHz. Move the purifier closer to the router. Restart the purifier and your router. Follow the Mi Home app's re-pairing instructions.
浄化性能が低いFilter lifespan expired; Air inlets/outlets blocked; Dirty laser particle sensor.Check filter lifespan in the app and replace if necessary. Ensure no obstructions around the air inlets/outlets. Clean the laser particle sensor as per maintenance instructions.
動作中に異音がするForeign object inside; Filter not seated correctly.Unplug the device and check for any foreign objects. Ensure the filter is properly installed and secured.
OLED display not working or showing incorrect informationTemporary glitch; Sensor malfunction.Try restarting the device by unplugging and plugging it back in. If the issue persists, contact customer support.

9. 仕様

Detailed technical specifications for the Xiaomi Mi Air Purifier 2S AC-M4-AA:

仕様価値
モデル番号AC-M4-AA
寸法(長さ×幅×高さ)24 x 24 x 52 cm(9.4 x 9.4 x 20.5インチ)
重さ4.5 kg (9.9 ポンド)
電源電気ケーブル
定格出力29ワット
フィルタータイプヘパ
適用エリア最大37㎡(398平方フィート)
騒音レベル32 Decibels (in Night Mode)
コントロールタイプApplication and Physical Buttons
特集Wi-Fi Connectivity, OLED Display
Xiaomi Mi Air Purifier 2S dimensions diagram

Image: Diagram illustrating the dimensions (height, width, depth) of the Xiaomi Mi Air Purifier 2S.

10. 保証とサポート

For detailed warranty information, terms, and conditions, please refer to the warranty card included with your product or visit the official XIAOMI webサイトでご確認ください。保証請求の際は購入証明として領収書を保管してください。

For technical support, service, or inquiries regarding your Xiaomi Mi Air Purifier 2S, please contact XIAOMI customer service or your local authorized retailer. Contact information can typically be found on the official XIAOMI webサイトまたは製品ドキュメントに記載されています。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.