ASUS ROG RYUO 240

ASUS ROG RYUO 240 RGB AIO Liquid CPU Cooler User Manual

Comprehensive user manual for the ASUS ROG RYUO 240 RGB AIO Liquid CPU Cooler, covering setup, operation, maintenance, troubleshooting, specifications, and warranty information.

1. はじめに

This manual provides detailed instructions for the installation, operation, and maintenance of your ASUS ROG RYUO 240 RGB AIO Liquid CPU Cooler. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your product.

ASUS ROG RYUO 240 RGB AIO Liquid CPU Cooler with 240mm radiator and dual fans.

Figure 1: ASUS ROG RYUO 240 RGB AIO Liquid CPU Cooler with 240mm radiator and dual fans.

2. パッケージ内容

以下にリストされているすべてのアイテムが製品パッケージに含まれていることを確認してください。

  • 1 x ROG RYUO 240 Liquid Cooler (Pump unit with integrated OLED panel and 240mm radiator)
  • 2 x 120mm ROG Ryuo Fan Model 12
  • 1 x Accessory Pack of Screws and brackets (for various CPU sockets)
  • 1 x USB Cable for Software control
  • Thermal compound (pre-applied on cold plate)
  • 1 x Quick Start Guide (this document)
Complete assembly of the ASUS ROG RYUO 240 liquid CPU cooler, showing the radiator, two 120mm fans, and pump unit.

Figure 2: All components of the ASUS ROG RYUO 240 Liquid CPU Cooler.

3. セットアップとインストール

Follow these general steps for installing your ASUS ROG RYUO 240 Liquid CPU Cooler. Refer to your motherboard manual for specific details regarding CPU socket preparation.

  1. CPUソケットを準備します。 Install the appropriate backplate and standoffs for your CPU socket (Intel or AMD) as indicated in the accessory pack.
  2. ラジエーターを取り付ける: Secure the 240mm radiator to an available fan mount in your PC case. Ensure proper airflow direction (intake or exhaust) based on your case's cooling design.
  3. Install the Fans: Attach the two 120mm ROG Ryuo Fan Model 12 fans to the radiator using the provided screws.
  4. Position the Pump Head: Carefully place the pump head onto the CPU, aligning it with the standoffs. The thermal compound is pre-applied.
  5. ポンプヘッドを固定します。 Use the appropriate mounting brackets and thumb screws to secure the pump head firmly to the CPU socket. Do not overtighten.
  6. ファンケーブルを接続します。 Connect the 4-pin PWM fan cables from the fans to the fan headers on the pump unit or directly to your motherboard's CPU_FAN/CHA_FAN headers.
  7. ポンプ電源を接続: Connect the pump power cable to an available AIO_PUMP or CPU_OPT header on your motherboard.
  8. USBケーブルを接続します: Connect the included USB cable from the pump unit to an available internal USB 2.0 header on your motherboard. This is essential for software control of the OLED panel and RGB lighting.
  9. ケーブル管理 適切な空気の流れときれいな組み立てを確保するために、すべてのケーブルをきちんと配線します。
Single 120mm ROG Ryuo Fan Model 12, designed for optimal airflow and static pressure.

Figure 3: ROG Ryuo Fan Model 12.

4. 操作とソフトウェア制御

The ASUS ROG RYUO 240 features a 1.77" full-color OLED panel and Aura Sync addressable RGB lighting, both controllable via ASUS LiveDash software.

4.1. LiveDash Software

To fully utilize the OLED panel and RGB lighting customization, download and install the latest LiveDash software from the official ASUS support website. Ensure you also have the Aura Sync software installed for full compatibility.

  • OLED Panel Customization: The LiveDash software allows you to display real-time system statistics (e.g., CPU temperature, fan speed), personalized logos, or custom animations on the 1.77" OLED panel. Supported image formats include GIF and JPG with a resolution of 160 x 128 pixels and a maximum size of 1 MB.
  • Aura Sync RGB照明: Synchronize the cooler's RGB lighting effects with other Aura Sync-enabled components in your system for a unified aesthetic.
  • ファンコントロール: Utilize the precise PWM pump and fan control features within LiveDash to optimize airflow and static pressure, balancing cooling performance with noise levels.
Close-up of the ASUS ROG RYUO 240 pump head featuring customizable RGB lighting and OLED display.

Figure 4: Customizable RGB lighting on the pump head.

ASUS ROG RYUO 240 pump head with a dark OLED panel, ready for custom display.

Figure 5: The 1.77" OLED panel on the pump head.

5. メンテナンス

Regular maintenance ensures optimal performance and extends the lifespan of your liquid CPU cooler.

  • ほこりの除去: ラジエーターフィンとファンブレードは、空気の流れを妨げて冷却効率を低下させる可能性のある埃の蓄積を防ぐため、定期的に清掃してください。圧縮空気または柔らかいブラシを使用してください。
  • ファンの検査: Check fans for any signs of wear, unusual noise, or obstructions. Ensure they are securely mounted.
  • チューブと接続: Inspect the tubing for any kinks, leaks, or damage. Ensure all connections are secure.
  • サーマルペースト: While thermal paste is pre-applied, consider reapplying it if you remove the pump head for any reason, or if you notice a significant increase in CPU temperatures over time.

6。 トラブルシューティング

If you encounter issues with your ASUS ROG RYUO 240, refer to the following common troubleshooting steps:

  • No Power/No RGB/OLED Display Off:
    • Ensure all power cables (pump, fans) are securely connected to the motherboard headers.
    • Verify the internal USB 2.0 cable is correctly connected to both the pump unit and the motherboard.
    • Check LiveDash and Aura Sync software settings to ensure RGB and OLED are enabled and configured correctly.
  • 高いCPU温度:
    • ポンプが作動していることを確認します(わずかな振動を感じたり、かすかな音が聞こえたりすることがあります)。
    • ファンが回転しており、空気の流れが正しい方向になっていることを確認します。
    • ポンプ ヘッドが CPU にしっかりと取り付けられており、良好な接触が保たれていることを確認します。
    • ラジエーターフィンにほこりがたまっていないか確認し、必要に応じて清掃します。
    • Ensure LiveDash fan control settings are not set too low.
  • Unusual Noise from Cooler:
    • ノイズがファンから発生しているのか、ポンプから発生しているのかを特定します。
    • If from fans, check for obstructions or loose mounting. Consider adjusting fan curves in LiveDash.
    • If from the pump, ensure the pump is running at an appropriate speed. Some pump noise is normal, but excessive gurgling might indicate air in the loop (which usually resolves itself over time).
  • LiveDash Software Issues (e.g., OLED logo not changing):
    • Ensure you have downloaded and installed the latest version of LiveDash and Aura Sync software from the official ASUS support webサイト。
    • Restart the LiveDash application or your computer.
    • Verify that custom images/animations meet the specified resolution (160x128 pixels) and size (1MB) requirements.
    • Some games or anti-cheat software may conflict with LiveDash. Try exiting LiveDash before launching such applications if you experience issues.

7. 仕様

特徴詳細
ブランドエイスース
モデルROG RYUO 240
製品寸法長さ9インチ x 幅1.89インチ x 高さ9インチ
冷却方法
ラジエーターサイズ240mm
ファンサイズDual 120mm (ROG Ryuo Fan Model 12)
最高回転数2442 回転
風量81 CFM
騒音レベル37.6デシベル
OLEDパネル1.77" Full-color OLED
RGB照明Aura Sync Addressable RGB
電源コネクタタイプ4ピンPWM
巻tage12ボルト
ワットtage60W
材料銅 アルミニウム
対応デバイスAMD: AM4, TR4*

*Note: TR4 socket mounting requires a separate bracket, often included with TR4 CPUs.

8. 保証情報

The ASUS ROG RYUO 240 RGB AIO Liquid CPU Cooler comes with a 3年間保証 from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For detailed terms and conditions, please refer to the official ASUS warranty policy available on their webサイト。

保証請求に備えて購入証明書を保管してください。

9. サポート

For the latest drivers, utilities, FAQs, and product support, please visit the official ASUS support webサイト:

ASUS ROG RYUO 240 Support Page

You can also contact ASUS customer service for further assistance.

© 2023 ASUS. All rights reserved. ROGはASUSTeK Computer Inc.の登録商標です。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.