Furman PST-8 Digital Power Station User Manual

1. はじめに

The Furman PST-8 Digital Power Station is designed to provide clean, filtered AC power and superior protection for your electronic equipment. It incorporates Furman's proprietary SMP (Series Multi-Stage Protection) circuitry, which includes Linear Filtering Technology (LiFT) and a high-current TVZ-MOV, to ensure optimal performance and safeguard against electrical surges and spikes. The Extreme Voltage Shutdown (EVS) circuit automatically disconnects power if the input voltage exceeds safe levels, protecting connected devices.

2. 主な特徴

• 8 x NEMA 5-15R Outlets: 提供する ample connectivity for multiple electronic devices.
• 1 x NEMA 5-15P Input: Standard power input for connection to a wall outlet.
• 1 x RJ11 & 2 x Coaxial Jacks: Offers protection for telephone/network and cable/satellite lines.
• LineVol。tage：120V： Designed for standard North American electrical systems.
• オーバーボリュームtage Shutoff: 135 VAC: Automatic shutdown to prevent damage from extreme voltag条件。
• SMP（シリーズマルチStage 保護): Provides robust surge and spike protection without component sacrifice.
• LiFT (Linear Filtering Technology): Suppresses AC noise evenly across the entire frequency range for improved audio/video clarity.

3. セットアップ手順

1. ユニットを開梱します: Carefully remove the Furman PST-8 from its packaging. Inspect for any signs of damage.
2. 配置: Position the PST-8 in a stable location, away from excessive heat or moisture. Ensure adequate ventilation around the unit.
3. 電源に接続: Plug the PST-8's NEMA 5-15P input cable into a standard 120V AC wall outlet. The unit's power indicator should illuminate, confirming power is present.
4. 機器を接続する: Plug your electronic devices (audio/video equipment, computers, etc.) into the 8 NEMA 5-15R outlets on the PST-8. For optimal performance and protection, ensure all critical components are connected to the PST-8.
5. Connect Communication Lines (Optional): If desired, connect your telephone/network line to the RJ11 jacks and your cable/satellite lines to the coaxial jacks for additional surge protection.

画像: 上 view of the Furman PST-8 Digital Power Station, highlighting the 8 NEMA 5-15R outlets, power switch, and indicator lights.

画像: サイド view of the Furman PST-8 Digital Power Station, illustrating its durable metal construction.

4. 操作手順

The Furman PST-8 operates automatically once connected to a live power source. The front panel indicators provide status information:

• 保護オン: A green light indicates that the SMP circuit is active and providing surge protection.
• エクストリームVoltage Shutdown (EVS): 入力ボリュームがtage exceeds 135 VAC, the EVS circuit will automatically shut off power to connected equipment. The unit will automatically reset once the voltage returns to a safe operating range.
• 電源スイッチ： Use the illuminated power switch to turn the unit and all connected equipment on or off.

5. メンテナンス

The Furman PST-8 Digital Power Station requires minimal maintenance. Follow these guidelines to ensure its longevity and continued performance:

• クリーニング： Disconnect the unit from power before cleaning. Use a soft, dry cloth to wipe down the exterior. Avoid using liquid or aerosol cleaners.
• 検査： Periodically check the power cord and connected cables for any signs of damage or fraying. Replace damaged cables immediately.
• 換気： 過熱を防ぐため、ユニットの通気口が塞がれていないことを確認してください。

6。 トラブルシューティング

• コンセントに電力が供給されていません:
  • Check if the PST-8 is properly plugged into a live wall outlet.
  • Ensure the power switch on the PST-8 is in the 'On' position.
  • If the 'Extreme Voltage Shutdown' indicator is lit, the unit may have shut off due to high voltage. ボリュームを待つtage to stabilize, and the unit should reset automatically.
  • Verify that the circuit breaker in your home or office is not tripped.
• Intermittent Power or Noise:
  • すべての接続が安全であり、損傷がないことを確認してください。
  • The LiFT technology should minimize noise. If noise persists, try isolating the source of interference by unplugging devices one by one.
• Protection Indicator Off:
  • If the 'Protection On' indicator is not lit, the surge protection circuitry may have been compromised due to a severe surge. The unit may still pass power, but protection is no longer active. Contact Furman support for service or replacement.

7. 仕様

8. 保証とサポート

For warranty information, technical support, or service inquiries, please refer to the official Furman web公式サイトをご覧いただくか、カスタマーサービス部門にお問い合わせください。保証請求のために購入時のレシートを保管してください。