BAOSHISHAN Electric Strapping Tool ZKN-65b User Manual

1. はじめに

This manual provides detailed instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of your BAOSHISHAN Electric Strapping Tool, Model ZKN-65b. This battery-powered tool is designed for tensioning, welding, and cutting PP (Polypropylene) and PET (Polyester) straps, streamlining packaging processes for various items such as boxes, pallets, and bundles.

Figure 1: BAOSHISHAN Electric Strapping Tool ZKN-65b and its packaging.

2. 安全に関する注意事項

ツールを操作する前に、すべての安全に関する指示をよく読んで理解してください。指示に従わない場合、怪我をしたり、ツールが損傷したりする可能性があります。

• Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when operating the strapping tool.
• Keep hands and loose clothing clear of moving parts, especially the strapping feed and cutting mechanisms.
• Ensure the battery is correctly inserted and charged according to the instructions. Do not use damaged batteries or chargers.
• Do not attempt to strap items that exceed the tool's specified strapping width and thickness limits.
• Operate the tool in a well-lit and clear workspace.
• Disconnect the battery before performing any maintenance or adjustments.
• Keep the tool away from moisture and extreme temperatures.

3.製品オーバーview および仕様

3.1 パッケージ内容

開梱したら、以下にリストされているすべてのアイテムが揃っていることを確認してください。

図 2: 製品パッケージに含まれるアイテム。

• BAOSHISHAN Electric Strapping Tool (Main Unit)
• 電池（1個付属）
• バッテリー充電器
• ユーザーマニュアル
• サービスカード
• Basic Tools (e.g., screwdriver, wrench)
• Small accessories for polypropylene strapping (e.g., spring, gasket)

3.2 技術仕様

図3：以上view of tool specifications and controls.

4. セットアップ

4.1 バッテリーの充電と取り付け

1. Before first use, fully charge the battery using the provided charger. The battery indicator light will show charging status. A blue light indicates a full charge.
2. To install the battery, slide it into the battery compartment at the rear of the tool until it clicks securely into place.
3. バッテリーを取り外すには、リリースボタンを押してバッテリーをスライドさせて取り出します。

4.2 Adjusting for Strap Type (PP/PET)

The tool is compatible with both PP and PET straps within the specified width and thickness. For optimal performance with PP straps, it may be necessary to replace the short spring with the longer spring and add the silver gasket under the plate, as indicated in Figure 4.

Figure 4: Adjusting for Polypropylene (PP) strapping.

Figure 5: Polyester (PET) strapping compatibility.

4.3 Adjusting Tensioning Force and Welding Time

The tool features two adjustment knobs on the side for fine-tuning the tensioning force and welding time:

• Tensioning Force: Turn the left knob clockwise to increase tension (up to 2800N) and counter-clockwise to decrease it (down to 600N).
• Friction Welding Time: Turn the right knob clockwise to increase welding time (up to 5 seconds) and counter-clockwise to decrease it (down to 2 seconds).

Figure 6: Tensioning force and welding time adjustment knobs.

Experiment with settings on scrap material to find the optimal balance for your specific strap type and package requirements.

5. 操作手順

Follow these steps to effectively strap your packages:

Figure 7: Step-by-step operation guide.

1. 電池を挿入します: Ensure a charged battery is securely installed in the tool. The battery capacity indicator light will show its charge level (blue for full, red for low, red flashing for very low).
2. Insert Packing Belt: Lift the handle with your right hand. With your left hand, insert the strapping belt into the tool, ensuring the top and bottom straps are stacked parallel. Release the handle to secure the strap.
3. ストラップを締める: Press the tensioning button (typically the main lever or trigger). Hold it down firmly. The tool will begin to tension the strap. Release the tensioning button once the desired tension is reached. The LED will display blue during tensioning. Ensure the strapping remains stable and does not twist during this process.
4. Bonding of Straps: Press the welding button (usually a separate button). Hold this button down firmly for the set welding time (2-5 seconds). The machine will automatically weld the straps together using friction and cut off any excess. It is crucial to hold the welding button down until the sealing process is complete. After welding, release the welding button. Do not squeeze the handle grip that releases the strapping until the flashing light on the tool stops flashing, indicating the weld has cooled and set.
5. ツールを削除します。 Once the welding is complete and the light has stopped flashing, lift the handle and carefully remove the tool from the strapped package.

5.1アプリケーション例ampレ

The BAOSHISHAN Electric Strapping Tool is suitable for a variety of packaging applications, including:

• Securing cardboard boxes
• Bundling wood products and pallets
• Strapping steel coils
• Bundling pipes
• Securing stone blocks

Figure 8: Various applications of the strapping tool.

6. メンテナンス

Regular maintenance ensures the longevity and optimal performance of your strapping tool.

• クリーニング： Periodically clean the tool's exterior with a dry, soft cloth. Ensure no dust or debris accumulates in the strapping path or around the welding mechanism.
• カッター検査: Regularly inspect the alloy cutter for wear or damage. A dull or damaged cutter can lead to incomplete cuts. Replace if necessary.
• バッテリーのケア： バッテリーは涼しく乾燥した場所に保管してください。バッテリーを頻繁に完全に放電することは避けてください。長期間保管する場合は、バッテリー容量の約50%まで充電してください。
• 一般検査: Before each use, check for any loose screws, damaged parts, or unusual noises during operation. Address any issues promptly.

Figure 9: Internal components and features for maintenance reference.

7。 トラブルシューティング

This section addresses common issues you might encounter with your strapping tool.

If you encounter a problem not listed here or if the suggested solutions do not resolve the issue, please contact BAOSHISHAN customer support.

8. 保証とサポート

BAOSHISHAN provides a 12ヶ月保証 for this strapping tool, covering manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

For technical assistance, troubleshooting beyond this manual, or warranty service, please contact the BAOSHISHAN customer support team. Our professional and friendly after-sales team is available to help you resolve any issues and ensure your satisfaction.

Refer to the service card included in your package for specific contact details or visit the official BAOSHISHAN webサポート情報のサイト。