Elitech LogEt 8 BLE Bluetooth Wireless Data Logger User Manual

1.製品オーバーview

The Elitech LogEt 8 BLE is a Bluetooth wireless multi-use PDF data logger designed for monitoring temperature in various life science applications. It features a USB port for direct data download and PDF report generation, and Bluetooth connectivity for remote management via the Elitech App.

主な特徴:

• ワイヤレス Bluetooth テクノロジー: Enables one-click pairing and remote programming/management via the Elitech App within meters.
• 広い温度測定範囲: -22℉ to 158℉ (-30℃ to 70℃) with an accuracy of ±0.9℉ (±0.5℃).
• モバイルアプリの互換性: Free Elitech App for iOS and Android devices facilitates remote logger management and cold chain monitoring.
• Multi-use Capability: Designed for repeated use over approximately 2 years under room temperature conditions.
• 自動データ同期: Automatically uploads all recorded data to your account when connected to the Elitech APP.
• High Recording Capacity: Stores up to 16,000 recording points.

図1: 前面 view of the LogEt 8 BLE data logger with labeled components.

2. パッケージ内容

開梱時にパッケージ内のすべてのアイテムが揃っていることを確認してください。

• 1 x LogEt 8 BLE Data Logger
• ユーザーマニュアル x 1
• 1x校正証明書

Figure 2: Contents included in the LogEt 8 BLE package.

3. デバイスコンポーネント

Familiarize yourself with the main components of the LogEt 8 BLE data logger:

• USBポート: Located at the top, protected by a removable cap. Used for direct connection to a computer for data download and configuration.
• LCDスクリーン: Displays current temperature, alarm status, recording status, and battery level.
• スタートボタン： Initiates data recording.
• 停止ボタン： Halts data recording.
• Embedded Temperature Sensor: Internal sensor for accurate temperature measurement.

4. セットアップ

4.1 初期設定

1. デバイスを開梱します。 Carefully remove the LogEt 8 BLE from its packaging.
2. 損傷の検査: Check the device for any visible damage. If damaged, contact customer support.
3. バッテリーのアクティベーション: The device comes with a pre-installed lithium metal battery. No initial activation is typically required.

4.2 Software Installation (Elitech App)

To fully utilize the LogEt 8 BLE's features, download the Elitech App on your mobile device:

• 検索する "Elitech" in the Apple App Store (for iOS) or Google Play Store (for Android).
• Download and install the official Elitech App.
• アカウントを作成するか、すでにアカウントをお持ちの場合はログインしてください。

4.3Bluetooth経由で接続する

アプリをインストールしたら:

1. モバイルデバイスでBluetoothが有効になっていることを確認します。
2. Open the Elitech App.
3. The app will scan for nearby Elitech data loggers. Select your LogEt 8 BLE from the list to pair.
4. Follow any on-screen prompts for one-click pairing.

4.4 Programming the Logger

Before starting a recording, configure the logger's parameters using the Elitech App or by connecting directly to a computer via USB:

• Via Elitech App: Within the app, navigate to the settings for your connected LogEt 8 BLE. You can set parameters such as sampling interval, alarm thresholds, start delay, and recording duration.
• Via USB (PC Software): Remove the protective cap to expose the USB port. Connect the logger to a computer. Use the Elitech data management software (downloadable from the Elitech website) to configure settings.

Figure 3: Default parameters sticker on the side of the device.

5. 操作手順

5.1 録音の開始

To begin data logging:

• を押し続けます 始める button for approximately 3 seconds until the "REC" indicator appears on the LCD screen.
• If a start delay was configured, the logger will begin recording after the specified delay.

5.2 録音の停止

To end data logging:

• を押し続けます 停止 button for approximately 3 seconds until the "END" indicator appears on the LCD screen.
• Alternatively, connect the logger to the Elitech App or PC software and select the option to stop recording.

5.3 Data Download and Report Generation

After recording, data can be retrieved and analyzed:

• USB経由: Remove the USB cap and plug the logger into a computer's USB port. The logger will automatically generate a PDF report and a CSV data file。 これら files can be accessed directly from the logger's virtual drive.
• Via Elitech App: Connect the logger to the Elitech App via Bluetooth. The app will automatically sync and upload all data to your account. You can then view graphs, export data, or generate reports directly from the app.

Figure 4: LogEt 8 BLE with USB port exposed and key specifications.

6. メンテナンス

6.1 バッテリー情報

The LogEt 8 BLE is powered by a non-rechargeable lithium metal battery. The battery is designed to last for approximately 2 years under normal operating conditions. The battery is contained within the equipment and is not user-serviceable. Attempting to replace the battery may damage the device and void the warranty.

6.2 クリーニング

デバイスをクリーニングするには：

• 柔らかい乾いた布で外側を拭きます。
• 研磨剤入りの洗剤や溶剤を使用したり、デバイスを水に浸したりしないでください。

6.3 ストレージ

When not in use, store the data logger in a cool, dry place, away from direct sunlight and extreme temperatures.

7。 トラブルシューティング

If you encounter issues with your LogEt 8 BLE, refer to the following common problems and solutions:

• デバイスの電源が入らない: Check battery level on the LCD. If the battery is depleted, the device may need replacement as the battery is not user-serviceable.
• Bluetooth経由で接続できません: Ensure Bluetooth is enabled on your mobile device and the Elitech App is open. Make sure the logger is within range. Restart both the logger and your mobile device.
• データが記録されていません: Verify that recording was properly started (check for "REC" on LCD). Ensure the logger's memory is not full.
• PDF report not generated: Ensure the logger is connected to a computer's USB port correctly. Try a different USB port or computer. Ensure the USB cap is fully removed.
• 不正確な読み取り: Ensure the logger's sensor is not obstructed and is placed in an environment suitable for its operating range.

For further assistance, contact Elitech customer support.

8. 仕様

9. 保証とサポート

9.1 保証情報

Elitech products typically come with a limited warranty covering manufacturing defects. Please refer to the warranty card included in your package or visit the official Elitech website for specific warranty terms and conditions applicable to the LogEt 8 BLE.

9.2 カスタマーサポート

For technical support, troubleshooting assistance, or warranty claims, please contact Elitech customer service:

• Webサイト： 訪問 www.elitechus.com FAQ、ソフトウェアのダウンロード、連絡先情報については、こちらをご覧ください。
• メールアドレス/電話番号: Elitechを参照してください web最新の連絡先情報については、サイトまたは製品パッケージをご覧ください。