タールamps TR2 P Remote Control Car Alarm User Manual

1. はじめに

タールamps TR2 P Remote Control is an advanced device designed exclusively for Taramps Group alarm systems. It incorporates anti-cloning (hopping code) technology to provide enhanced security for your vehicle. This remote control also features a presence function and a home function, allowing for the activation of automated gates. Built for durability, it is resistant to moisture infiltration and includes a long-lasting lithium battery with a low battery indicator.

Figure 1: Taramps TR2 P Remote Control. This image shows the front view of the remote control, highlighting its four primary function buttons and the LED indicator.

2. 主な特徴

• Anti-Cloning Technology: Utilizes HOPPING CODE for enhanced security against unauthorized duplication.
• 互換性: Fully compatible with all Taramps TW20 series alarm systems.
• 動作周波数: 433.92 MHz で動作します。
• LEDインジケーター: Features a blue LED for status indication.
• 耐久性のある構造: Manufactured from high-density ABS material.
• 耐水性: Designed to be resistant to moisture infiltration.
• バッテリー： Powered by a CR2032 Lithium 3V battery, known for its long durability.
• Presence Function: Identified by its gray color, this function is integral to the alarm system's presence feature.
• Home Function: Allows for the activation of automated gates.

3. セットアップ

3.1 バッテリーの取り付け

The TR2 P remote control comes with a CR2032 lithium battery pre-installed. If replacement is needed, follow these steps:

1. リモコンを慎重に開けるasing using a small, flat tool.
2. 古い CR2032 電池を取り外します。
3. Insert a new CR2032 3V lithium battery, ensuring the positive (+) side faces upwards.
4. リモコンを閉じるasinカチッと音がするまでしっかりと締めます。

3.2 Pairing with Taramps TW20 Alarm System

To ensure proper functionality, the TR2 P remote control must be paired with your Taramps TW20 alarm system. Refer to your specific Taramps TW20 alarm system manual for detailed pairing instructions, as the procedure may vary slightly between alarm models. Generally, the process involves:

1. Entering the alarm system's programming mode (often by turning the ignition on/off a specific number of times or pressing a master button).
2. Pressing a button on the TR2 P remote control when prompted by the alarm system.
3. Confirming successful pairing (usually indicated by a siren chirp or LED flash from the alarm system).

4. 操作手順

The TR2 P remote control features four primary buttons for various functions:

• House Icon Button (⌂): をアクティブにします ホーム機能, typically used for controlling automated gates or other integrated home automation features.
• Locked Padlock Icon Button (🔒): Locks the vehicle and arms the alarm system. Press this button to secure your vehicle.
• Unlocked Padlock Icon Button (🔓): Unlocks the vehicle and disarms the alarm system. Press this button to access your vehicle.
• Asterisk Icon Button (*): This button is typically associated with the プレゼンス機能 or other auxiliary functions depending on your alarm system's configuration. Consult your alarm system manual for specific details.

The blue LED indicator on the remote control will illuminate briefly when a button is pressed, confirming signal transmission.

5. メンテナンス

5.1 電池の交換

The TR2 P remote control is powered by a CR2032 3V lithium battery. The remote control will indicate a low battery condition, prompting replacement. Refer to section 3.1 for battery installation instructions.

5.2クリーニングとお手入れ

• リモコンは柔らかく乾いた布で拭いてください。
• Avoid using abrasive cleaners or solvents, as these can damage the casing とボタン。
• While resistant to moisture, avoid prolonged exposure to water or submerging the device.

6。 トラブルシューティング

• リモコンが応答しない:
  • Check if the blue LED illuminates when a button is pressed. If not, the battery may be depleted. Replace the CR2032 battery (see section 3.1).
  • Ensure you are within range of the alarm system.
  • Verify that the remote control is properly paired with your Taramps TW20 alarm system (see section 3.2).
• 断続動作:
  • 電池が消耗すると動作が不安定になることがあります。電池を交換してください。
  • Environmental interference might affect signal transmission. Try operating the remote from a different location.
• Alarm System Not Responding to Home Function:
  • Ensure the automated gate receiver is powered on and within range.
  • Verify that the Home Function is correctly programmed and linked to your automated gate system. Consult the gate system's manual or a professional installer.

7. 仕様

8. 保証情報

タールamps TR2 P Remote Control comes with a 2年間保証. This warranty is provided directly by the manufacturer, Taramps Electronics, and is valid for 24 months from the date of product purchase. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the included Warranty Certificate.

9. サポート

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Taramps customer support. Refer to the contact information provided on the product packaging or the official Taramps webサイト。

タールamps Official Webサイト： www.taramps.com.br