Noble Twin XL Air Mattress Instruction Manual

導入

Thank you for choosing the Noble Twin XL Air Mattress. This manual provides essential information for the safe and efficient use, setup, operation, and maintenance of your air mattress. Please read these instructions thoroughly before initial use and retain them for future reference.

重要な安全情報

• Do not use this product with children or pets unsupervised.
• Always ensure the product is fully deflated before storing.
• 最大重量制限を超えないでください 350ポンド.
• Always follow the instructions for proper inflation and deflation to avoid damage or injury.
• Do not operate the built-in pump while both inflation and deflation valves are closed.
• This air mattress is designed for in-home and outdoor use.

パッケージ内容

すべてのコンポーネントが存在することを確認します。

• Noble Twin XL Air Mattress with Built-in Pump
• キャリーバッグ

Image: The grey Noble branded carry bag for storing the air mattress.

設定

1. 開梱： Remove the air mattress and carry bag from its packaging.
2. 配置: Lay the air mattress on a clean, level surface free from sharp objects. Ensure there is sufficient space around the mattress for inflation.
3. 電源接続: Locate the built-in pump on the side of the mattress. Uncoil the power cord from its storage compartment and plug it into a standard 120V AC electrical outlet.

Image: A person sleeping comfortably on the inflated Noble Twin XL air mattress, demonstrating its elevated height.

Operating the Built-in Pump

画像: 詳細 view of the built-in pump panel, showing the 'Inflation Valve', 'Deflation Valve', 'Power' switch, and the power cord compartment.

インフレーション

1. Open Inflation Valve: Turn the 'Inflation Valve' knob counter-clockwise to the "OPEN" position.
2. 電源オン: Flip the 'Power' switch to the "ON" position. The pump will begin to inflate the mattress.
3. インフレを監視する: The mattress will reach full inflation in under 3 minutes. The pump's sound may change pitch as it approaches full inflation.
4. 硬さを調整する: Once fully inflated, you can adjust the firmness by briefly turning the 'Deflation Valve' knob to "OPEN" to release a small amount of air, then quickly closing it.
5. Close Inflation Valve: Once desired firmness is achieved, flip the 'Power' switch to "OFF" and turn the 'Inflation Valve' knob clockwise to the "CLOSE" position.

デフレ

1. Open Deflation Valve: Turn the 'Deflation Valve' knob counter-clockwise to the "OPEN" position.
2. 電源オン: Flip the 'Power' switch to the "ON" position. The pump will begin to deflate the mattress.
3. デフレを監視する: The mattress will deflate in approximately 2 minutes.
4. Power Off and Close Valve: Once fully deflated, flip the 'Power' switch to "OFF" and turn the 'Deflation Valve' knob clockwise to the "CLOSE" position.
5. Store Power Cord: Carefully coil the power cord and place it back into its storage compartment.

注記： For the first few uses, the mattress material may stretch, requiring additional air to maintain desired firmness. This is normal and not an indication of a leak.

メンテナンス

• クリーニング： エアマットレスを掃除するには、表面を広告で拭いてください。amp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the mattress is completely dry before storing.
• ストレージ： After deflation, fold the mattress neatly and place it into the provided carry bag. Store in a cool, dry place away from direct sunlight and extreme temperatures.
• パンク防止: Avoid placing the mattress on rough or sharp surfaces. Keep pets away from the mattress to prevent punctures.

画像: オーバーヘッド view of the Noble Twin XL air mattress, highlighting its comfortable quilt top surface.

トラブルシューティング

Image: A cutaway illustration of the Noble Twin XL air mattress, revealing the internal coil beam construction designed for support and stability.

仕様

保証とサポート

The Noble Twin XL Air Mattress comes with a 1年保証. This warranty covers manufacturing defects under normal use. For warranty claims or technical support, please contact Noble customer service. Contact details are typically provided with your purchase documentation or on the official Noble webサイト。