Intex 26798NP Oval Prism Frame Pool Instruction Manual

1. はじめに

This manual provides essential information for the safe and efficient setup, operation, and maintenance of your Intex 26798NP Oval Prism Frame Pool. Please read all instructions carefully before installation and retain this manual for future reference. This pool is designed for recreational use and is suitable for individuals aged 6 years and older, with a capacity for up to 8 people.

Image 1.1: The Intex 26798NP Oval Prism Frame Pool, ready for use in a backyard setting.

2. 安全情報

警告: これらの指示に従わなかった場合、重傷または死亡事故につながる可能性があります。

• 大人の監督が必要: Always supervise children and individuals with disabilities in and around the pool.
• 飛び込みや飛び跳ねは禁止です プールは飛び込んだり飛び込んだりできるほど深くありません。
• 安全なアクセス: Always use the safety ladder provided and ensure it is removed or secured when the pool is not in use to prevent unsupervised access.
• 適切な取り付け: Install the pool on a firm, level, and stable surface. Ensure the area is clear of sharp objects.
• 電気安全: Connect the filter pump only to a grounded outlet protected by a Ground Fault Circuit Interrupter (GFCI) or Residual Current Device (RCD). Do not use extension cords.
• 化学物質の取り扱い: Handle pool chemicals according to manufacturer's instructions. Keep chemicals out of reach of children.
• 耐荷重: The maximum user load for this pool is calculated at 1007 kg/m² (based on 8 users weighing 50 kg each). For any installation on rooftops or elevated structures (terraces, balconies, attics, patios), consult a qualified technician to verify the maximum load capacity supported by the building structure.

Image 2.1: Important warning regarding the pool's load capacity and the need for structural consultation on elevated surfaces.

3. パッケージ内容

Verify that all components listed below are present and undamaged before beginning assembly. If any parts are missing or damaged, do not proceed with assembly and contact Intex customer service.

• Intex Prism Frame Oval Pool Liner (610 x 305 x 122 cm)
• Durable Steel Tubular Frame Set with Epoxy Finish
• Type A Cartridge Filter Pump (5,678 l/h filtration capacity, 38 mm connection)
• 安全はしご
• 挽いた布
• プールカバー
• 取扱説明書

4. Site Preparation & Setup

4.1 サイトの選択

Choose a flat, level area in your garden or patio. The ground must be firm and free of any sharp objects, debris, or roots. Ensure there is adequate space around the pool for safe access and maintenance. Avoid placing the pool under overhead power lines or near structures that could fall into the pool.

4.2 組み立て

1. 地面を準備する: Lay the ground cloth on the selected area. This protects the pool liner from punctures.
2. ライナーを広げます: Carefully unfold the pool liner onto the ground cloth. Position the drain plug towards the area where you intend to drain the pool.
3. フレームを組み立てます: Follow the diagrams provided in the separate assembly guide (if included) to connect the steel tubular frame pieces. Ensure all connections are secure. The frame is designed for easy interlocking.
4. ライナーを取り付ける: Secure the pool liner to the frame according to the assembly instructions. Ensure the liner is evenly stretched and free of wrinkles.
5. 水で満たします: Begin filling the pool with water. As the water level rises, smooth out any remaining wrinkles in the bottom of the liner. Fill to the recommended water line, which is approximately 104 cm from the bottom (total height 122 cm).
6. フィルターポンプの取り付け: Connect the filter pump to the designated inlets and outlets on the pool liner using the 38 mm connections. Refer to the filter pump manual for detailed installation.
7. 安全はしごを設置する: Assemble and install the safety ladder. Ensure it is stable and securely placed.

Image 4.1: Pool dimensions and recommended water level for the Intex 26798NP model.

Image 4.2: Detail of the durable triple-layer liner construction, showing its 0.67 mm thickness.

5. フィルターポンプの動作

The included Type A cartridge filter pump is essential for maintaining water clarity. It has a filtration capacity of 5,678 liters per hour.

1. 初期設定： Ensure the pump is connected correctly to the pool and the power supply.
2. 手術： Run the filter pump for several hours each day to circulate and filter the pool water. The exact duration depends on pool usage and water conditions. Consult the pump manual for specific operating times.
3. フィルターカートリッジ: The filter cartridge (Type A) should be rinsed with a garden hose every few days and replaced every two weeks, or more frequently if the water appears cloudy or the pump flow rate decreases.
4. ハイドロエアレーション技術： The pool system incorporates Hydro Aeration Technology to improve water circulation and filtration, enhancing water clarity and freshness.

Image 5.1: Hydro Aeration Technology and filter pump components, highlighting the 5,678 L/Hr flow rate.

6. 水処理とメンテナンス

Proper water chemistry is crucial for a safe and enjoyable swimming experience.

• 定期的に水を検査する： Use a pool test kit to check pH and chlorine levels daily or as needed.
• Adjust pH: Maintain pH levels between 7.2 and 7.6. Use pH increaser or decreaser as required.
• サニタイズ： Add chlorine tablets to a floating dispenser to sanitize the water. Follow the chemical manufacturer's instructions for dosage.
• クリーニング： Regularly skim debris from the water surface and use a pool vacuum to clean the bottom of the pool.
• プールカバー: Use the included pool cover when the pool is not in use to prevent debris from entering and reduce water evaporation.

7. Draining & Storage

When the swimming season ends, or if the pool needs to be moved, follow these steps for draining and storage:

1. 水を抜きます： Connect a garden hose to the drain plug located on the pool liner. Direct the hose to a suitable drainage area away from your home. Open the drain plug to allow water to empty.
2. Clean the Pool: Once empty, thoroughly clean the pool liner and frame components.
3. 完全に乾燥させます: Ensure the liner and all metal parts are completely dry before disassembling. This prevents mold, mildew, and corrosion.
4. 分解： Carefully disassemble the frame and liner, reversing the assembly steps.
5. 店： Fold the liner compactly and store all components in a dry, protected area, away from extreme temperatures and pests.

8。 トラブルシューティング

このセクションでは、プールで発生する可能性のある一般的な問題について説明します。

• 濁った水: Check filter cartridge for cleanliness and replace if necessary. Test water chemistry and adjust chlorine and pH levels. Increase filter pump operating time.
• Low Water Flow from Pump: Clean or replace the filter cartridge. Check for blockages in the pump hoses or skimmer basket. Ensure pump is primed correctly.
• Pool Leaks: Inspect the liner for punctures. Use a vinyl repair kit to patch small holes. Check all hose connections for tightness.
• フレームの不安定性: Ensure the pool is on a perfectly level surface. Recheck all frame connections to ensure they are fully engaged.

For issues not covered here, please contact Intex customer support.

9. 仕様

10.保証とサポート

保証情報、製品登録、またはテクニカルサポートについては、製品に付属の保証書を参照するか、Intexの公式ウェブサイトをご覧ください。 webサイトでご確認ください。購入証明として購入レシートを保管してください。