iGPSPORT iGS50E GPS Bike Computer User Manual

1. はじめに

The iGPSPORT iGS50E is a high-performance GPS bike computer designed to provide cyclists with comprehensive real-time data and navigation capabilities. Featuring a highly sensitive GPS receiver, ANT+ connectivity for external sensors, and a large, anti-glare display, the iGS50E offers a reliable and user-friendly experience for tracking your rides. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your device.

Figure 1.1: The iGPSPORT iGS50E GPS Bike Computer with its display showing various ride metrics.

2. セットアップ

2.1. パッケージ内容

始める前に、パッケージにすべてのコンポーネントが含まれていることを確認してください。

• iGPSPORT iGS50E Bike Computer (x1)
• マイクロUSBケーブル（x1）
• Standard Bike Mount (x1)
• ユーザーマニュアル (x1)

Figure 2.1: The iGS50E bike computer and its retail packaging.

2.2. デバイスの充電

The iGS50E is equipped with a 1200 mAh Lithium-polymer battery, providing up to 40 hours of endurance. Before first use, fully charge the device using the provided Micro-USB cable. Connect the cable to the charging port on the device and a standard USB power adapter (not included) or a computer USB port.

2.3. バイクコンピューターの取り付け

Use the standard bike mount to securely attach the iGS50E to your bicycle's handlebars or stem.

1. Position the mount on your handlebar or stem in a location that provides clear visibility and easy access to the buttons.
2. Secure the mount using the provided rubber bands or zip ties.
3. Align the iGS50E with the mount, place it onto the mount, and rotate it clockwise until it clicks securely into place.

Figure 2.2: The iGS50E bike computer mounted on a bicycle handlebar, view上から編集。

Figure 2.3: The iGS50E bike computer mounted on a bicycle handlebar, view横から編集。

2.4. Initial Power On and GPS Acquisition

Press and hold the power button to turn on the device. For accurate positioning, ensure the device has a clear view of the sky to acquire GPS satellites quickly. The highly sensitive GPS will track your distance, speed, and location.

2.5. Pairing ANT+ Sensors

The iGS50E supports ANT+ sensors from all brands, including heart rate monitors, speed sensors, and cadence sensors. To pair a sensor:

1. Ensure your ANT+ sensor is active and within range of the iGS50E.
2. Navigate to the sensor pairing menu on the iGS50E (refer to the 'Operating' section for menu navigation).
3. Select the type of sensor you wish to pair (e.g., Heart Rate, Speed, Cadence).
4. The device will search for available sensors. Select your sensor from the list to complete pairing.

2.6. Connecting to the iGPSPORT App

The iGS50E can connect to the iGPSPORT app via Bluetooth 4.0 for data synchronization and settings management. The app is available for both Android and iPhone devices.

• Androidの場合: 検索する "iGPSPORT" in the Google Play Store.
• iPhoneの場合: 検索する "iGPSPORT" in the App Store.

After installing the app, enable Bluetooth on your smartphone and follow the in-app instructions to pair your iGS50E. Note that Bluetooth 4.0 connectivity is for app connection only and does not support Bluetooth heart rate monitors or other tools.

3.デバイスの操作

3.1. 基本的な操作

The iGS50E features button-based user input. Refer to the device layout for specific button functions:

• 電源ボタン: Press and hold to power on/off. Short press for backlight or to confirm selections.
• 左ボタン: Navigate left or scroll up in menus.
• 右ボタン: Navigate right or scroll down in menus.
• 中央のボタン： Start/stop recording, enter menu.

3.2. Real-time Display Data

The 2.2-inch high-brightness, high-contrast, anti-glare LCD display shows up to 13 real-time data points:

• 速度 (SPD)
• Average Speed (AV SPD)
• Maximum Speed (MX-SPD)
• Ride Time (TRIP TIME)
• Daily Distance (DST)
• 総距離（ODO）
• 高度（ALT）
• Gradient (TEM)
• Temperature (TEM)
• 時間
• 日付
• カロリー消費
• Lap Data

When ANT+ sensors are connected, the display can also show 6 additional data points:

• Current Cadence
• Maximum Cadence
• 現在の心拍数
• 平均心拍数
• 最大心拍数
• Maximum Heart Rate (repeated, likely a typo in source, assuming 5 distinct data points)

3.3. Recording Rides

To start recording a ride, ensure GPS signal is acquired and press the Middle button. The device will begin recording your ride data. Press the Middle button again to pause or stop the recording. The device has approximately 200 hours of ride data memory.

3.4. Data Upload and STRAVA Compatibility

After your ride, you can upload your data to the iGPSPORT app via Bluetooth. The iGS50E supports file uploads, making it compatible with platforms like STRAVA. Connect the device to the app, and follow the app's instructions to sync and upload your ride data.

3.5.デバイス設定

Access the device settings menu to configure various parameters such as time, date, units (metric/imperial), and sensor management. Refer to the on-screen prompts and use the navigation buttons to adjust settings.

4. メンテナンス

4.1. 清掃

To clean your iGS50E, wipe it with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the device's casing またはディスプレイ。

4.2. 耐水性

The iGS50E has an IPX7 waterproof rating, meaning it can withstand immersion in water up to 1 meter for 30 minutes. While it is resistant to rain and splashes, avoid prolonged submersion or high-pressure water jets.

4.3. バッテリーのお手入れ

To maximize battery life, avoid exposing the device to extreme temperatures. Charge the device regularly, but avoid leaving it fully discharged for extended periods. If storing the device for a long time, charge it to about 50% before storage.

5。 トラブルシューティング

5.1. GPS信号の問題

• 必ず開けた場所で、 view 空の。
• デバイスが衛星を取得するまで数分間お待ちください。
• Restart the device if GPS acquisition is taking too long.

5.2. Sensor Connection Problems

• Check if the ANT+ sensor's battery is charged and correctly installed.
• Ensure the sensor is active and within close proximity to the iGS50E.
• Try re-pairing the sensor through the device's settings menu.

5.3. アプリの接続の問題

• Ensure Bluetooth is enabled on your smartphone and the iGS50E.
• iGPSPORT アプリが最新バージョンに更新されていることを確認してください。
• Try restarting both your smartphone and the iGS50E.
• Unpair and re-pair the device within the app's settings.

5.4. 表示の問題

• Adjust the backlight settings for better visibility in different lighting conditions.
• Ensure the screen is clean and free from dirt or smudges.

6. 仕様

7. 保証とサポート

The iGPSPORT iGS50E comes with a 2年間保証, ensuring coverage against manufacturing defects. iGPSPORT also provides 生涯サポート この製品について。

For technical assistance, warranty claims, or any other inquiries, please contact iGPSPORT customer support through their official website or the iGPSPORT app.