Utilitech GYQ27-W モーションセンサー 取扱説明書

製品終了view

The Utilitech GYQ27-W is a white wire-in replacement motion sensor designed for outdoor lighting applications. It provides automatic light control by detecting motion and activating the light for a set duration. This sensor offers wide coverage and includes features for energy efficiency and manual override.

図1: フロント view of the Utilitech GYQ27-W White Wire-in Replacement Motion Sensor. The sensor features a compact, white housing with a translucent detection lens at the front and a threaded base for wire-in installation.

主な特徴

• Automatic Light Control: Turns lights on when motion is detected.
• 調整可能なタイマー: Light remains on for 1, 3, or 10 minutes after motion ceases, with a 5-second test mode.
• 広範囲をカバー: Provides up to 240° coverage and 69-ft of downward perimeter protection.
• 夕暮れから夜明けまでのセンサー: Automatically activates at dusk and deactivates at dawn.
• 幅広い互換性: Compatible with dimmable LED, dimmable CFL, halogen, and incandescent bulbs.
• エネルギー効率: Features 2-level brightness technology.
• 手動オーバーライド: Allows the light to operate constantly for a selected period.

セットアップとインストール

Proper installation is crucial for optimal performance and safety. It is recommended to consult a qualified electrician if you are unsure about any steps.

安全上の注意

• 設置または保守作業を行う前に、必ず回路ブレーカーで電源をオフにしてください。
• Ensure wiring connections are secure and comply with local electrical codes.
• 最大ワット数を超えないでくださいtage rating of the connected lighting fixture.

インストール手順

1. 電源を切る: Locate the circuit breaker controlling the outdoor light fixture and switch it to the OFF position. Verify power is off using a voltageテスター。
2. Remove Existing Sensor (if applicable): Carefully disconnect the wiring from the old motion sensor or light fixture.
3. 配線を接続: Follow the wiring diagram provided with your specific light fixture. Typically, this involves connecting the sensor's wires (line, load, neutral) to the corresponding wires from the power supply and the light fixture. Ensure all connections are tight and insulated with wire nuts.
4. マウントセンサー： Securely mount the Utilitech GYQ27-W motion sensor to the desired location. Ensure it has a clear line of sight to the area you wish to monitor.
5. 電力を回復する： Once all connections are secure and the sensor is mounted, turn the power back on at the circuit breaker.

操作手順

The GYQ27-W motion sensor offers several adjustable settings to customize its operation.

設定の調整

• 時間設定: The sensor allows you to set the duration the light remains on after motion is detected. Common settings are 1, 3, or 10 minutes. Refer to the sensor's physical controls for specific adjustment methods (e.g., dial, switch).
• テストモード： A 5-second test mode is available for initial setup and aiming. In this mode, the light will turn on for approximately 5 seconds each time motion is detected, regardless of the set time.
• 夕暮れから夜明けまでの特集: The integrated photocell automatically prevents the light from activating during daylight hours, conserving energy. The sensor will only activate the light when ambient light levels fall below a certain threshold.
• 感度調整： Some models may include a sensitivity dial to adjust the range or sensitivity of motion detection. Adjust this to prevent false triggers from small animals or distant objects.

手動オーバーライド

To keep the light on continuously for a period, you can typically activate the manual override function. This is often done by quickly turning the light switch OFF and then ON within a few seconds. The light will then stay on until the override period expires or the switch is cycled again. Consult the specific instructions that came with your sensor for precise manual override steps.

メンテナンス

The Utilitech GYQ27-W motion sensor requires minimal maintenance to ensure long-term performance.

• クリーニング： 定期的にセンサーレンズを柔らかくて乾いた布で拭いてください。amp ほこり、汚れ、またはコブを取り除く布webs that may obstruct the sensor's view. Do not use abrasive cleaners.
• 検査： Annually inspect the wiring and mounting for any signs of wear, damage, or loosening. Ensure the sensor is still securely positioned.
• 環境要因: Keep the area around the sensor clear of obstructions like tree branches or tall shrubs that could block the detection field or cause false triggers due to wind movement.

トラブルシューティング

If your Utilitech GYQ27-W motion sensor is not functioning as expected, refer to the following common issues and solutions:

仕様

保証とサポート

Information regarding specific warranty terms for the Utilitech GYQ27-W motion sensor is not provided in this manual. For warranty details, technical support, or replacement parts, please refer to the original product packaging or contact Utilitech customer service directly.

You may also visit the official Utilitech web最新の情報とサポート リソースを提供するサイトです。