導入
Thank you for choosing the Infinity Basslink DC powered subwoofer system. This manual provides essential information for the proper installation, operation, and maintenance of your new subwoofer. Please read this manual thoroughly before using the product to ensure safe and optimal performance. The Basslink DC is designed to deliver powerful bass in a compact form factor, suitable for a wide range of vehicle applications.
安全情報
怪我や製品の損傷を防ぐために、常に次の安全上の注意事項を守ってください。
- 短絡を防止するために、すべての接続が安全かつ適切に絶縁されていることを確認してください。
- サブウーファーを過度の湿気や極端な温度にさらさないでください。
- Avoid placing the subwoofer in locations where it could obstruct driver visibility or interfere with vehicle controls.
- 電気作業を行う前に車両のバッテリーを外してください。
- 警告： この製品を使用すると、カリフォルニア州でがんや先天異常、その他の生殖障害を引き起こすことが知られている鉛などの化学物質にさらされる可能性があります。詳細については、 www.p65warnings.ca.gov.
製品終了view
主な特徴
- Integrated system with a 10-inch (250mm) woofer and a 10-inch (250mm) passive radiator for enhanced bass response.
- Efficient 200-watt RMS Class D amplifier provides powerful and clear audio output.
- Compact footprint allows for flexible placement in vehicles where traditional custom enclosures may not fit.
- Equipped with a complete set of user controls for total optimization of performance, including gain, bass EQ, and crossover adjustments.
- Features quick-disconnects and quick-release connections for easy hook-up and convenient removal when additional cargo space is required.
- Connectivity via RCA inputs.
- コード付き電源で駆動します。
パッケージ内容
- Infinity Basslink DC Subwoofer
- クイックスタートガイド（QSG）
前面と側面 view of the Infinity Basslink DC subwoofer, showcasinコンパクトなデザインとグリルが特徴です。
セットアップとインストール
配置に関する考慮事項
The Basslink DC's compact design allows for versatile placement within your vehicle. Consider locations that provide adequate ventilation and do not interfere with vehicle operation or passenger safety. Common placement areas include the trunk, under seats, or in cargo areas. The quick-release connections facilitate easy removal if extra cargo space is needed.
The Infinity Basslink DC subwoofer installed in the trunk of a vehicle, demonstrating its compact size and easy integration.
配線接続
The Basslink DC connects to your vehicle's audio system via RCA inputs. Ensure proper connections for power, ground, and remote turn-on. Refer to the Quick Start Guide for detailed wiring diagrams specific to your vehicle's audio system. Utilize the quick-disconnect terminals for simplified installation and removal.
- 電源接続: Connect the main power wire to the vehicle's battery, ensuring an inline fuse is installed close to the battery.
- アース接続： アース線を車両シャーシの清潔で塗装されていない金属面に接続します。
- リモート電源オン: Connect the remote wire to the remote output of your head unit or an ignition-switched 12V source.
- オーディオ入力: Connect the RCA cables from your head unit's subwoofer output to the Basslink DC's RCA inputs.
手術
電源のオン/オフ
The Basslink DC will automatically power on when it receives a remote turn-on signal from your vehicle's head unit and power is supplied. It will power off when the remote signal is removed. A 'Power' indicator light on the control panel will illuminate when the unit is active.
ユーザーコントロール
The Basslink DC features a control panel to fine-tune its performance to your preference and vehicle acoustics. These controls typically include:
- ゲインコントロール： の入力感度を調整します。 amplifier to match the output level of your head unit. Start with the gain at minimum and slowly increase until the desired bass level is achieved without distortion.
- 低音EQ： Provides a boost or cut to specific bass frequencies, allowing you to tailor the bass response.
- クロスオーバーコントロール: Sets the upper frequency limit for the subwoofer. This ensures that the subwoofer only reproduces low frequencies, while your main speakers handle the mid-range and high frequencies. Adjust this to blend seamlessly with your vehicle's existing speakers.
後方 view of the Infinity Basslink DC subwoofer showing its dimensions and control panel with Power, Protect, Gain, Bass EQ, and Crossover adjustments.
メンテナンス
The Basslink DC requires minimal maintenance. Follow these guidelines to ensure longevity:
- Regularly clean the exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Ensure that the grille and ventilation openings are free from dust and debris to prevent overheating.
- すべての配線接続部の締め付け具合と腐食を定期的に点検してください。
トラブルシューティング
If you experience issues with your Basslink DC, consult the following common troubleshooting steps:
- 電源なし: Check the power, ground, and remote turn-on connections. Verify the inline fuse near the battery. Ensure the vehicle's ignition is on.
- 音が出ない: Confirm that the RCA audio cables are securely connected to both the head unit and the Basslink DC. Check the gain and crossover settings. Ensure the head unit's subwoofer output is enabled and properly configured.
- 歪んだ音: Reduce the gain setting on the Basslink DC. Check the head unit's volume and bass settings to ensure they are not excessively high. Verify that the crossover frequency is set appropriately.
- 'Protect' Light On: If the 'Protect' indicator light illuminates, the amplifier may be in protection mode due to overheating, a short circuit, or an impedance mismatch. Turn off the system, allow it to cool, and check all wiring for shorts.
これらの手順を実行しても問題が解決しない場合は、カスタマー サポートに問い合わせてさらにサポートを受けてください。
技術仕様
| 仕様 | 価値 |
|---|---|
| ブランド | 無限 |
| スピーカー最大出力 | 300 ワット (ピーク) |
| 接続技術 | RCA |
| オーディオ出力モード | ステレオ |
| 取り付けタイプ | Tabletop Mount (Flexible Placement) |
| スピーカータイプ | サブウーファー |
| サブウーファーの直径 | 10インチ（250mm） |
| コントローラータイプ | コード式電気 |
| 商品の寸法（奥行き x 幅 x 高さ） | 奥行き8.31インチ x 幅14.5インチ x 高さ14.5インチ |
| アイテム重量 | 22.9 ポンド |
| モデル番号 | INFBASSLINKDCBLK |
| モデル名 | Basslink DC |
| 欧州連合 | 050667371210 |
保証とサポート
The Infinity Basslink DC is covered by a 1年間のメーカー限定保証この保証は、通常の使用状況における材料および製造上の欠陥を対象としています。保証請求の際は、購入証明書を保管してください。
For technical support, warranty service, or additional information, please refer to the contact details provided in your Quick Start Guide or visit the official Infinity webサイトで確認してください。ご自身でユニットを修理しようとしないでください。保証が無効になる場合があります。
