Bluesound WM200 Universal Wall Mount Instruction Manual

導入

Thank you for choosing the Bluesound WM200 Universal Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your wall mount. Please read these instructions thoroughly before installation and retain them for future reference.

The WM200 wall mount is specifically designed for use with Bluesound PULSE, PULSE 2, PULSE 2i, PULSE MINI, and PULSE MINI 2i speakers, offering a secure and aesthetically pleasing mounting solution.

安全情報

• すべての指示をお読みください: Before installation, carefully read and understand all instructions.
• Verify wall structure: Ensure the mounting surface can safely support the combined weight of the wall mount and your speaker. Consult a professional if unsure.
• 適切なツールを使用します。 Use only the recommended tools and hardware for installation.
• 安全なインストール: Improper installation can result in serious injury or damage to equipment. Ensure all fasteners are tightened securely.
• 小児の手の届かない場所に保管： 小さな部品は窒息の危険があります。

パッケージ内容

インストールを開始する前に、すべてのコンポーネントが揃っていることを確認してください。

• 1 x Bluesound WM200 Universal Wall Mount
• 取り付け金具（ネジ、壁アンカー）
• 取扱説明書（本書）

Figure 1: Bluesound WM200 Wall Mount product packaging.

セットアップとインストール

Follow these steps to securely install your Bluesound WM200 Universal Wall Mount:

1. 場所を選択してください： Select a suitable wall location, ensuring it is structurally sound and free from electrical wires or plumbing. Consider the optimal listening height and desired swivel range.
2. 掘削ポイントをマークする: Hold the wall mount against the wall at the desired height and use a pencil to mark the drilling points for the mounting screws. Ensure the mount is level.
3. ドリル穴: Using an appropriate drill bit for your wall type (e.g., masonry for brick, wood bit for studs), drill pilot holes at the marked locations. If drilling into drywall without a stud, insert the provided wall anchors.
4. 壁マウントを取り付ける: Align the wall mount with the drilled holes. Insert the mounting screws and tighten them securely. Do not overtighten. The mount is constructed from durable steel for reliable support.
5. ケーブルの配線: The WM200 features rubber mouldings designed for flexible wire management. Route your speaker's power and audio cables through these mouldings to keep them tidy and protected.
6. スピーカーを取り付ける: Carefully slide your compatible Bluesound speaker onto the wall mount. Ensure it is seated firmly and securely.

Figure 2: Bluesound WM200 Wall Mount with compatible speaker (speaker sold separately).

図3：側面 view of the WM200 mount securely holding a Bluesound speaker.

手術

The Bluesound WM200 Universal Wall Mount offers a 120° total swivel control. This allows you to adjust the direction of your speaker to optimize sound projection and listening experience. Gently pivot the speaker and mount assembly to achieve the desired angle.

メンテナンス

To ensure the longevity and appearance of your Bluesound WM200 Wall Mount, follow these simple maintenance guidelines:

• クリーニング： ほこりを取り除くには、柔らかく乾いた布でマウントを拭いてください。頑固な汚れには、軽くこすってamp 布で拭き、すぐに乾かしてください。研磨剤入りの洗剤や溶剤の使用は避けてください。
• 定期点検: Periodically check all mounting screws to ensure they remain tight and secure. Do not overtighten.

トラブルシューティング

If you encounter any issues with your WM200 Wall Mount, consider the following:

• マウントが緩い感じ: Ensure all mounting screws are securely fastened to the wall and that the speaker is correctly seated on the mount. Re-check the wall structure for stability.
• Speaker not fitting: Verify that your speaker model is compatible with the WM200 mount (PULSE, PULSE 2, PULSE 2i, PULSE MINI, PULSE MINI 2i).
• 回転が困難: Ensure no cables are obstructing the swivel mechanism. The swivel should operate smoothly with gentle force.

仕様

図4：例ample installation of the Bluesound WM200 Wall Mount in a living space.

保証情報

Bluesound products are manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region. Please refer to the warranty card included with your product or visit the official Bluesound web詳細な保証情報については、サイトをご覧ください。

サポート

For technical assistance, troubleshooting, or further inquiries regarding your Bluesound WM200 Universal Wall Mount, please visit the official Bluesound support website or contact their customer service department. You can typically find contact information and FAQs on the Bluesound webサイト：

www.bluesound.com/support