PROEL V10PLUS モニタースピーカー ユーザーマニュアル

1. はじめに

The PROEL V10PLUS is a high-performance, bi-amplified 2-way monitor speaker designed for professional audio applications. It integrates a powerful 600W Class D + AB amplifier with Switch-Mode Power Supply (SMPS) technology, ensuring efficient and clear sound reproduction. Its lightweight, reinforced polypropylene cabinet and ergonomic handle provide excellent portability, while its trapezoidal shape allows for versatile use as a stage monitor or for fixed installations.

2. 主な特徴

• バイamplified 2-way design: Features a 1-inch neodymium compression driver and a 10-inch woofer with a 2-inch voice coil.
• パワフル Amplification： 600W total power (Class D + AB amplifier with SMPS).
• Integrated Active Processor: Includes a dual LIMITER circuit for undistorted sound even at high levels.
• 多彩な入力: MIC/LINE input with two-band EQ for flexible audio source connection.
• ステータスインジケータ： Front LED for power (ON) and signal/clip indication.
• 高出力: Maximum SPL of 123dB.
• 広い周波数応答: 60Hz～20kHz。
• 耐久性に優れたポータブルなデザイン: Ultralight reinforced polypropylene cabinet with a comfortable carry handle.
• 柔軟な配置: Trapezoidal shape for use as a stage monitor and four M10 suspension points for installation.
• コンパクトで軽量： Product dimensions of 25 x 35 x 30 cm and a total weight of 10 kg.

3. セットアップ

Proper setup ensures optimal performance and longevity of your PROEL V10PLUS speaker. Follow these steps for initial configuration:

3.1 開梱と検査

スピーカーを梱包から慎重に取り出してください。輸送中に生じた損傷がないか確認してください。将来の輸送や保管のために、元の梱包は保管しておいてください。

3.2 配置

The V10PLUS is designed for various applications:

• フロアモニター: Position the speaker on the floor using its angled profile sの場合tageモニタリング。
• スピーカースタンド: Utilize the integrated pole mount socket on the bottom of the speaker to mount it on a standard speaker stand.
• サスペンション： Use the four M10 suspension points for fixed installations. Ensure proper rigging hardware and safety procedures are followed by qualified personnel.

Figure 3.2.1: PROEL V10PLUS in stagモニターの位置。

3.3 接続

Refer to the rear panel image for connection points.

図 3.3.1: 背面パネルの接続とコントロール。

1. 電源接続: Connect the supplied AC power cable to the POWER input on the rear panel and then to a suitable electrical outlet. Ensure the voltage matches the speaker's requirements (220-240V~ 50/60Hz).
2. オーディオ入力: Connect your audio source (mixer, microphone, instrument) to the INPUT section. The V10PLUS features a combo XLR/TRS input.
• For microphone signals, use the MIC/LINE switch to select 'MIC'.
• For line-level signals (e.g., from a mixer), select 'LINE'.
3. リンク出力： The LINK output (XLR) allows you to send the input signal to another V10PLUS speaker or another audio device.

4. 操作手順

Once connected, follow these steps to operate your PROEL V10PLUS speaker:

1. 電源オン: Ensure all connections are secure and the LEVEL knob is set to minimum. Flip the POWER switch to the 'ON' position. The front LED will illuminate to indicate power.
2. 入力選択: Set the MIC/LINE switch according to your input source (MIC for microphones, LINE for line-level devices).
3. 音量調整: Slowly increase the LEVEL knob to achieve the desired volume. Monitor the front LED: it should primarily show 'SIGNAL' (green). If it frequently shows 'CLIP' (red), reduce the input level from your source or the speaker's LEVEL knob to prevent distortion.
4. トーンコントロール： Use the HIGH and LOW EQ knobs to adjust the treble and bass frequencies to suit your preference or acoustic environment.
5. 電源を切る： Before disconnecting power or cables, turn the LEVEL knob to minimum and then flip the POWER switch to 'OFF'.

5. メンテナンス

Regular maintenance helps preserve the performance and appearance of your speaker.

• クリーニング： Use a soft, dry cloth to clean the cabinet. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by a dry cloth. Do not use abrasive cleaners, solvents, or waxes.
• グリルのクリーニング: 金属グリルは、柔らかいブラシや掃除機で優しく掃除してほこりを取り除くことができます。
• ストレージ： When not in use for extended periods, store the speaker in a dry, cool place, ideally in its original packaging or a protective cover, away from direct sunlight and extreme temperatures.
• ケーブル検査: Periodically check all power and audio cables for any signs of wear, cuts, or damage. Replace damaged cables immediately.

Caution: Do not attempt to open the speaker cabinet. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.

6。 トラブルシューティング

This section addresses common issues you might encounter with your PROEL V10PLUS speaker.

If the problem persists after trying these solutions, please contact PROEL customer support or an authorized service center.

7. 仕様

Detailed technical specifications for the PROEL V10PLUS speaker:

8. 保証とサポート

8.1 保証情報

This PROEL V10PLUS speaker comes with an extended warranty. For detailed information regarding warranty terms, conditions, and registration, please refer to the official PROEL webご購入の際は、サイトをご覧いただくか、正規販売店にお問い合わせください。保証請求の際に必要となりますので、購入証明書を保管してください。

8.2 カスタマーサポート

For technical assistance, service, or spare parts, please contact PROEL customer support. You can find contact information and additional resources, including FAQs and product documentation, on the official PROEL web地点 （www.proel.com). Please have your product model number (V10PLUS) and serial number ready when contacting support.