導入
The StarTech.com SV431DHD4KU is a 4-port Dual Monitor HDMI KVM Switch designed to control four HDMI-enabled computers from a single console (keyboard, mouse, and two monitors). This device supports resolutions up to 4K 30Hz and includes a built-in 2-port USB 3.0 hub for sharing peripherals, as well as 3.5mm audio ports for independent audio control.
パッケージ内容
- 1x SV431DHD4KU 4-Port Dual Monitor HDMI KVM Switch
- 1xクイックスタートガイド
- 4xラバーフィート
- 1x Universal Power Adapter (NA/JP, UK, EU, ANZ)

製品図
フロントパネル

- HID USB ポート: Connect your keyboard or mouse.
- USB 3.0ポート: Connect USB 3.0 peripherals.
- Computer Selection Buttons (1-4): 押すと対応するコンピュータに切り替わります。
- 電源インジケーター: Illuminates when the KVM switch is powered on.
背面パネル

- DC 9-12V電源入力: 付属の電源アダプターを接続します。
- コンソール ポート:
- 2x USB HID Ports (Keyboard/Mouse)
- USB 2 ポート x 3.0
- 2x 3.5mm Audio Out (Speakers)
- 2x 3.5mm Audio In (Microphone)
- PC Input Ports (PC1-PC4): Each computer requires:
- 2x HDMI Input Ports
- 1x USB 3.0 Input Port
- 1x 3.5mm Audio Out (from PC)
- 1x 3.5mm Audio In (to PC)
セットアップとインストール
KVM スイッチとコンピューターを接続するには、次の手順に従います。
- すべてのデバイスの電源をオフにします。 Ensure all computers, monitors, and the KVM switch are powered off and unplugged.
- コンソールデバイスを接続します。 Connect your keyboard and mouse to the HID USB ports on the KVM's console side. Connect your two HDMI monitors to the console HDMI output ports. Connect your speakers and microphone to the 3.5mm audio ports on the console side.
- コンピューターを接続する: For each computer (PC1 to PC4):
- Connect two HDMI cables from the computer's video output to the corresponding HDMI input ports on the KVM switch (e.g., PC1 HDMI 1 and PC1 HDMI 2).
- Connect a USB 3.0 cable from the computer's USB port to the corresponding USB 3.0 input port on the KVM switch (e.g., PC1 USB 3.0).
- Connect 3.5mm audio cables from the computer's audio output and input to the corresponding audio ports on the KVM switch (e.g., PC1 Audio Out and PC1 Audio In).
- 接続電源: Plug the universal power adapter into the DC 9-12V input on the KVM switch, then plug the adapter into a power outlet.
- 電源オン: Power on the KVM switch, then power on your monitors, and finally power on your connected computers.

手術
Switching Computers
You can switch between connected computers using the front panel buttons or keyboard hotkeys.
- フロントパネルのボタン: Press the corresponding numbered button (1-4) on the front panel of the KVM switch to select the desired computer.
- キーボードのホットキー: Use specific key combinations on your connected keyboard to switch between computers. Refer to the Quick-Start Guide for the exact hotkey sequences.
USB 3.0 ハブ機能
The KVM switch features a 2-port USB 3.0 hub on the console side. Any devices connected to these ports will automatically switch to the currently selected computer, allowing for shared access to peripherals like external hard drives, webcams, or printers.
オーディオ共有
The 3.5mm audio ports provide independent analog audio switching. Your speakers and microphone connected to the console will switch along with the selected computer, providing full multimedia control.
仕様
| 特徴 | 仕様 |
|---|---|
| モデル | SV431DHD4KU |
| ブランド | StarTech.com |
| ポート数 | 4 |
| ビデオインターフェイス | HDMI (Dual Monitor) |
| 最大解像度 | 4K 30Hz |
| USBハブ | 2ポートUSB3.0 |
| オーディオ | 3.5mm Stereo Audio (In/Out) |
| 制御方法 | Push Button, Hotkeys |
| 材料 | 鋼鉄 |
| 寸法(長さ×幅×高さ) | 8.7 x 5.1 x 2.5 インチ (22.1 x 13.0 x 6.4 cm) |
| アイテム重量 | 2.73ポンド(1.24kg) |
| 電源アダプター | DC 9-12V, 1.5A (18W) |
| 動作温度 | 0°C ~ 40°C (32°F ~ 104°F) |
トラブルシューティング
- ビデオ出力なし:
- Ensure all HDMI cables are securely connected between the computers, KVM, and monitors.
- Verify that the KVM switch is powered on and the correct computer port is selected.
- モニターの入力設定をチェックして、正しい HDMI 入力に設定されていることを確認します。
- Try using different HDMI cables or connecting monitors directly to a computer to rule out cable or monitor issues.
- キーボード/マウスが応答しない:
- Ensure the keyboard and mouse are connected to the dedicated HID USB ports on the KVM console.
- Verify that the USB cables from the computers to the KVM are securely connected.
- Some advanced keyboards/mice may require connection to the USB 3.0 hub ports instead of HID ports for full functionality.
- KVM スイッチとコンピューターを再起動します。
- オーディオの問題:
- すべての 3.5mm オーディオ ケーブルの接続を確認します。
- Ensure audio output/input settings on the selected computer are configured correctly.
- Verify speaker and microphone connections and functionality.
- USB 3.0 デバイスが検出されません:
- Ensure the USB 3.0 cables from the computers to the KVM are connected.
- Some high-power USB 3.0 devices may require an external power source.
- デバイスは直射日光や熱源を避け、涼しく乾燥した環境に保管してください。
- 外側は柔らかく乾いた布で拭いてください。刺激の強い化学薬品や研磨剤入りの洗剤の使用は避けてください。
- 過熱を防ぐために、ユニットの周囲に適切な換気を確保してください。
メンテナンス
KVM スイッチの寿命を延ばし、最適なパフォーマンスを確保するには:
保証とサポート
This StarTech.com SV431DHD4KU KVM Switch is backed by a 2年間保証.
For technical support, product information, or to access drivers and manuals, please visit the official StarTech.com webサイトをご覧いただくか、カスタマー サポートに直接お問い合わせください。
製品終了view ビデオ
全体像についてはこのビデオをご覧くださいview of the StarTech.com 4-Port Dual Monitor HDMI KVM Switch, highlighting its features and benefits.