Blackmagic Design Mini Converter UpDownCross HD User Manual

導入

The Blackmagic Design Mini Converter UpDownCross HD is a versatile video converter designed to transform any SD or HD video format to any other SD or HD video format. This device is essential for integrating various video equipment with differing format requirements, ensuring compatibility and seamless signal flow in professional video workflows.

It features both SDI and HDMI inputs and outputs, along with a reference input for built-in re-sync capabilities. The converter utilizes high-quality Teranex conversion algorithms and includes automatic audio delay for precise synchronization. This manual provides instructions for setting up, operating, and maintaining your Mini Converter UpDownCross HD.

設定

1。 開梱と検査

Carefully remove the Mini Converter from its packaging. Inspect the device for any signs of damage during transit. Ensure all components, including the universal power supply, are present.

2. 電源接続

Connect the provided +12V universal power supply to the 'POWER +6 to 36V' input on the converter. Use the appropriate international socket adapter for your region. The converter operates within a voltage range of 6 to 36 VDC and has a power consumption of 5W.

3. ビデオとオーディオの接続

Identify the input and output ports on the converter. Connect your source device (e.g., camera, computer) to either the SDIイン or HDMI IN port. Connect your display or recording device to the corresponding SDI出力 or HDMI出力 ポート。 SDIループ output provides a direct pass-through of the SDI input signal.

For precise synchronization in complex setups, connect a reference signal to the 参照入力 ポート。

画像: 正面 view of the Mini Converter, illustrating the SDI IN, SDI LOOP, HDMI IN, REF IN, SDI OUT, HDMI OUT, and Power connections.

画像: 斜め view of the Mini Converter, providing a clear perspective of all input and output ports.

4. ディップスイッチの設定

The Mini Converter UpDownCross HD uses a series of dip switches to configure its conversion settings. These switches are located on the side of the unit. Refer to the diagram printed on the converter or the detailed manual for specific settings. Each switch corresponds to a particular function or output format. Ensure the power is disconnected before adjusting dip switches.

• Output Format Selection: Use switches to select the desired output resolution and frame rate (e.g., 1080p29.97, 1080i50, 720p60).
• 処理モード: Switches may control options like Level A or Level B SDI output, or enable/disable processing.
• Input Detection: The converter typically auto-detects the input format, but specific switches might fine-tune this behavior.

After setting the dip switches, reconnect the power. The converter will apply the new settings.

画像: 詳細 view of the dip switch configuration diagram on the Mini Converter, showing various settings for output formats and processing modes.

オペレーティング

Video Conversion

Once properly connected and configured via the dip switches, the Mini Converter will automatically convert the incoming video signal to the specified output format. The high-quality Teranex conversion algorithms ensure a clean and accurate transformation of your video signals.

ソフトウェアのアップグレード

The Mini Converter includes an internal software upgrade option. To update the firmware, connect the converter to a computer via its USB port and use the Blackmagic Design updater application. This ensures your converter always has the latest features and performance enhancements.

オペレーティングシステム

The updater application for the Mini Converter is compatible with multiple operating systems, including Mac 10.14 Mojave, Mac 10.15 Catalina, Windows 8.1, and Windows 10.

メンテナンス

To ensure optimal performance and longevity of your Mini Converter, follow these simple maintenance guidelines:

• クリーニング： 本体の外側は、柔らかく乾いた布で拭いてください。液体洗剤や溶剤は、仕上げや内部部品を傷める可能性があるため、使用しないでください。
• 換気： 過熱を防ぐため、コンバータは十分な通気のある場所に設置してください。通気口を塞がないでください。
• ストレージ： When not in use for extended periods, store the converter in a cool, dry place, away from direct sunlight and extreme temperatures.

トラブルシューティング

If you encounter issues with your Mini Converter, consider the following troubleshooting steps:

• ビデオ出力なし:
  • Verify all video cables (SDI, HDMI) are securely connected to both the converter and your source/destination devices.
  • Check the power connection and ensure the converter is receiving power.
  • Review the dip switch settings to confirm the output format matches the capabilities of your display or recording device.
  • Ensure the input signal is within the supported range of the converter.
• Incorrect Video Format/Resolution:
  • Double-check the dip switch settings for the desired output format. Make sure they are set correctly according to the diagram.
  • Confirm the input signal's format and resolution.
• 断続的な信号:
  • ケーブルに損傷や接続の緩みがないか点検します。
  • 電源が安定しており、指定された電圧範囲内であることを確認するtage範囲。
  • 他の電子機器からの潜在的な干渉がないか確認してください。
• オーディオの問題：
  • Verify that audio is present in the input signal.
  • Ensure the output device is configured to receive embedded audio.

これらの手順で問題が解決しない場合は、サポート セクションを参照してさらにサポートを受けてください。

仕様

保証情報

The Blackmagic Design Mini Converter UpDownCross HD comes with a 2年間保証. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official Blackmagic Design warranty policy available on their webサイト。

サポート

For technical assistance, product inquiries, or to report initial defects, please contact Blackmagic Design Technical Support directly.

• メールアドレス: support-jp@blackmagicdesign.com (Please note this email is for Japan support, refer to the official Blackmagic Design website for your regional support contact.)
• 電話： 03-5465-2102 (Japan support line. Please visit the official Blackmagic Design website for your regional phone support.)
• Webサイト： Visit the official Blackmagic Design website for comprehensive support resources, FAQs, and the latest software updates.