McKesson 18324201

McKesson Reclining Wheelchair with Detachable Desk Arms

モデル: 18324201

ユーザーマニュアル

1. はじめに

This manual provides essential information for the safe and effective use, assembly, operation, and maintenance of your McKesson Reclining Wheelchair. Please read this manual thoroughly before using the wheelchair and retain it for future reference.

The McKesson Reclining Wheelchair is designed to provide mobility and comfort, featuring a reclining backrest, detachable desk arms, and elevating leg rests. It is constructed with a durable carbon steel frame and comfortable nylon upholstery.

McKesson Reclining Wheelchair, side view

Image 1.1: McKesson Reclining Wheelchair, side view、ショーasing the full reclining backrest and elevating leg rests.

2. 安全情報

ご自身の安全と周囲の安全は最優先です。以下の安全ガイドラインを必ず遵守してください。

  • Ensure the wheelchair is fully assembled and all components are securely locked before use.
  • 最大耐荷重 300 ポンドを超えないようにしてください。
  • 車椅子に乗り降りするときや静止しているときは、必ずホイールロックをかけてください。
  • Use anti-tippers (if equipped) to prevent backward tipping, especially when reclining.
  • Avoid sudden movements or leaning excessively to one side, which could cause instability.
  • Regularly inspect the wheelchair for loose parts, worn tires, or damaged components. Do not use if damaged.
  • Seek assistance when navigating steep inclines, declines, or uneven terrain.

3.コンポーネントオーバーview

Familiarize yourself with the main components of your McKesson Reclining Wheelchair:

  • フレーム: Carbon steel frame with silver vein finish.
  • 背もたれ: High-back, reclining mechanism with nylon upholstery.
  • シート: 18-inch wide nylon seat.
  • アームレスト: Detachable, padded desk arms.
  • Leg Rests/Footplates: Swing-away, elevating leg rests with metal footplates.
  • ホイール: Composite mag-style rear wheels with urethane tires, 8-inch front casters.
  • ホイールロック: Manual locks for securing the rear wheels.
  • チップ反対派: (If included) Rear stability devices.
McKesson Reclining Wheelchair, front view

画像3.1:正面 view of the McKesson Reclining Wheelchair, highlighting the detachable desk arms and elevating leg rests.

4. セットアップと組み立て

The wheelchair typically arrives partially assembled. Follow these steps for final setup:

  1. 車椅子の展開:
    • 折りたたんだ車椅子を平らで安定した場所に置きます。
    • Push down on the seat rails until the seat is fully open and flat. Ensure the cross-braces are fully extended.
  2. 脚置きの取り付け:
    • Align the leg rest pins with the receiving brackets on the front of the wheelchair frame.
    • Swing the leg rests inward until they lock into place.
    • Adjust the height of the footplates as needed by loosening the adjustment knob, positioning the footplate, and re-tightening.
  3. Attaching Desk Arms:
    • Insert the armrest posts into the receptacles on the side of the frame.
    • Ensure they click securely into place. To detach, press the release button and lift.
  4. ヘッドレスト調整:
    • Adjust the headrest height and angle for user comfort by manipulating the adjustable straps or mechanisms.

5. 操作手順

5.1. 背もたれのリクライニング

The hydraulic reclining mechanism allows for infinite adjustments up to 180 degrees (fully flat).

  1. Ensure the user is safely positioned and the wheel locks are engaged.
  2. Locate the reclining levers, typically on the push handles or sides of the backrest.
  3. Simultaneously depress the levers and gently guide the backrest to the desired angle.
  4. Release the levers to lock the backrest in position.
  5. When reclining significantly, ensure the elevating leg rests are adjusted to support the user's legs.

5.2. Adjusting Elevating Leg Rests

The leg rests can be elevated to various positions for comfort or medical needs.

  1. Locate the release lever or knob on the side of the leg rest.
  2. Depress the lever/knob and gently raise or lower the leg rest to the desired height.
  3. Release the lever/knob to lock the leg rest in place.
  4. The leg rests can also swing away for easier transfers. Press the release button near the attachment point and swing them outwards.

5.3. 車椅子の操作

To push the wheelchair, grasp the push handles firmly. To turn, apply more pressure to one handle while guiding with the other. For self-propulsion, grasp the handrims on the rear wheels and push forward.

  • 障害を乗り越える: For small obstacles, tilt the wheelchair slightly backward by pressing down on the anti-tippers (if present) or foot levers, then push over the obstacle.
  • Inclines/Declines: Always face uphill when ascending and descend backward for better control. Engage wheel locks if stopping on an incline.

5.4. Folding the Wheelchair

For transport or storage, the wheelchair can be folded.

  1. Ensure the user is out of the wheelchair.
  2. Remove the leg rests and armrests if desired.
  3. Grasp the middle of the seat upholstery (or a designated folding bar) and pull upwards. The wheelchair frame will collapse inward.
McKesson Reclining Wheelchair in a home setting

Image 5.1: McKesson Reclining Wheelchair positioned in a living space, demonstrating its functional design.

6. メンテナンスとケア

定期的なメンテナンスにより、車椅子の寿命が長くなり、安全にご使用いただけます。

  • クリーニング: フレームを広告で拭くamp cloth and mild detergent. Clean upholstery with a suitable fabric cleaner. Avoid abrasive cleaners.
  • ホイール検査: Regularly check tires for wear and tear. Ensure wheels spin freely and wheel locks engage properly.
  • 留め具: すべてのナット、ボルト、ネジがしっかりと締まっているかどうかを定期的に確認してください。緩んでいる留め具があれば締め直してください。
  • 可動部品: Lubricate moving parts (e.g., reclining mechanism pivots, axle points) with a silicone-based lubricant as needed.
  • ストレージ: 車椅子は、極端な温度を避け、乾燥した清潔な環境に保管してください。

7。 トラブルシューティング

問題が発生した場合は、次の一般的な問題と解決策を参照してください。

  • Wheelchair pulls to one side: Check tire pressure (if pneumatic), ensure wheels are properly aligned, and inspect for bent axles.
  • Wheel locks not engaging: Adjust the wheel lock mechanism. Ensure tires are not excessively worn.
  • Reclining mechanism stiff: Apply lubricant to pivot points. Check for obstructions.
  • きしみ音: Identify the source of the noise and apply lubricant to the affected moving part.

For issues not resolved by these steps, contact McKesson customer support or a qualified technician.

8. 仕様

Detailed specifications for the McKesson Reclining Wheelchair, Model 18324201:

特徴 詳細
モデル番号 18324201 (Manufacturer # 146-SSP18RBDDA)
欧州連合 0612479223363
シート幅 18インチ
シートの奥行き 16インチ
シート高 20-1/2インチ
重量容量 300ポンド。
製品重量 約60ポンド。
フレーム素材 Carbon Steel with Silver Vein Finish
張り地素材 ナイロン、黒
アームスタイル Detachable Padded Desk Arms
Footrest/Leg Rest Type Swing-Away Elevating Footrests with Metal Footplates
タイヤの種類 Urethane/Rubber
車軸タイプ 一軸
折りたたみタイプ 折りたたみ
リクライニング機構 Hydraulic, up to 180 degrees
ラテックスフリー 天然ゴムラテックスを使用していません
Product label for McKesson Full Reclining Wheelchair, 18 inches

Image 8.1: Product label showing model number 146-SSP18RBDDA and UPC 0612479223363.

9. 保証とサポート

For warranty information, please refer to the documentation included with your purchase or contact McKesson customer service directly. McKesson provides support for its products to ensure customer satisfaction.

メーカー: マケソンメディカルサージカル社

サポートが必要な場合は、 McKesson Store on Amazon または、公式サポート チャネルにお問い合わせください。

10. 免責事項

Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is a medical device and should be used under the guidance of a healthcare professional if required. Always consult with a medical professional for specific health concerns.

© 2025 McKesson. All rights reserved.