Ematic Universal Table Top TV Stand (Model EMWT4005) Instruction Manual

1. はじめに

This manual provides detailed instructions for the assembly, operation, and maintenance of your Ematic Universal Table Top TV Stand, model EMWT4005. This stand is designed to securely hold flat panel LCD TVs ranging from 22 to 55 inches and weighing up to 88 lbs (40 kg). It features a durable black tempered glass base, 3-position height adjustability, and integrated cable management for a clean setup. Please read this manual thoroughly before installation and retain it for future reference.

2. 安全情報

• すべての指示をお読みください: Before assembly and use, read and understand all instructions. Failure to do so may result in personal injury or property damage.
• 重量容量: 最大荷重40kg（88ポンド）を超えないようにしてください。過積載は不安定になり、怪我の原因となる可能性があります。
• 画面サイズ: This stand is designed for TVs between 22 and 55 inches. Using a TV outside this range may compromise stability.
• VESAの互換性： Ensure your TV's VESA mounting pattern is compatible with the stand (see specifications).
• 適切なツール: 組み立てには適切な工具を使用してください。ネジを締めすぎないでください。
• 水平な表面: Always place the assembled stand on a stable, level, and sturdy surface to prevent tipping.
• 子供とペット: 組み立てエリアに子供やペットを近づけないでください。小さな部品は窒息の危険があります。
• ケーブル管理 Route all cables neatly to prevent tripping hazards and ensure proper ventilation.
• 定期点検: すべてのネジと接続がしっかりと固定されているか定期的に確認してください。

3. パッケージ内容

組み立てを始める前に、すべての部品が揃っていて損傷がないことを確認してください。部品が不足または損傷している場合は、組み立てを続行せず、カスタマーサポートにご連絡ください。

This image displays all the individual components included with your Ematic Universal Table Top TV Stand, ready for assembly. It includes the tempered glass base, main support column, TV mounting plate, two TV mounting brackets, and various screws and hardware.

• 強化ガラスベース
• メインサポートコラム
• テレビ取り付けプレート
• テレビ取付金具（2個）
• ケーブル管理クリップ
• Hardware Kit (various screws, washers, spacers for assembly and TV attachment)

4. セットアップとインストール

Follow these steps carefully to assemble your Ematic Universal Table Top TV Stand.

Step 1: Attach Main Support Column to Tempered Glass Base

1. 傷がつかないように、強化ガラスベースを柔らかく清潔な表面に慎重に置いてください。
2. Align the main support column with the pre-drilled holes on the tempered glass base.
3. Secure the column to the base using the provided screws and washers from the hardware kit. Tighten firmly but do not overtighten.

Step 2: Attach TV Mounting Plate to Main Support Column

1. Position the TV mounting plate onto the top of the main support column.
2. Secure the mounting plate to the column using the designated screws and nuts. Ensure it is centered and level.

Step 3: Attach TV Mounting Brackets to Your TV

Before attaching the brackets, determine the correct VESA mounting pattern for your television. Refer to your TV's manual or measure the distance between the mounting holes on the back of your TV (horizontal x vertical).

This diagram illustrates the VESA mounting patterns compatible with the Ematic TV stand, including 400x400mm, 400x300mm, 400x200mm, 300x300mm, 200x200mm, 200x100mm, and 100x100mm. Ensure your TV's VESA pattern matches one of these.

1. ハードウェア キットから、テレビの取り付け穴に適合する適切なネジ、ワッシャー、スペーサーを選択します。
2. Attach the two TV mounting brackets to the back of your television. Ensure the hooks on the brackets face upwards and are positioned correctly to hang onto the TV mounting plate.
3. ネジはしっかりと締めますが、締めすぎないようにしてください。

Step 4: Mount TV onto the Stand

1. With assistance, carefully lift your television with the attached brackets.
2. Hook the TV mounting brackets onto the TV mounting plate on the stand. Ensure both brackets are securely seated.
3. Engage any safety locks or screws on the brackets to prevent the TV from accidentally lifting off the stand.

ステップ5: ケーブル管理

1. Gather all TV and accessory cables.
2. Use the provided cable management clip to route the cables neatly down the main support column. This helps maintain a tidy appearance and prevents cable damage.

5. 操作

The Ematic Universal Table Top TV Stand offers simple operation for optimal viewing。

This image showcases the key features of the Ematic TV stand: 3-stage height adjustment for optimal viewing, compatibility with LCD screens from 23 to 55 inches, integrated cable management to keep wires tidy, and a robust tempered glass base supporting up to 40kg (88lbs).

高さ調整

This stand features 3-stage height adjustability. To adjust the height of your television:

1. Carefully remove the TV from the mounting plate (refer to Step 4 of installation in reverse).
2. Adjust the position of the TV mounting plate on the main support column to one of the three available height settings.
3. Re-secure the TV mounting plate to the column and re-mount your television, ensuring all safety locks are engaged.

ケーブル管理

Utilize the integrated cable management system to keep your setup organized. Route all power and signal cables along the main support column and secure them with the provided clip or cable ties (not included) to maintain a clean and safe environment.

6. メンテナンス

To ensure the longevity and safe operation of your TV stand, follow these maintenance guidelines:

• クリーニング： Use a soft, dry cloth to wipe down the tempered glass base and metal components. For stubborn marks, a slightly damp 中性洗剤を含ませた布で拭き、乾燥させてください。研磨剤入りの洗剤や溶剤の使用は避けてください。
• ハードウェアチェック: Periodically (e.g., every 3-6 months) check all screws and bolts to ensure they are tight and secure. Loose connections can compromise stability.
• 検査： Inspect the stand for any signs of wear, damage, or corrosion. If any issues are found, discontinue use and contact customer support.
• 移転: When moving the stand, always lift it carefully. Do not drag it, especially with a TV mounted, as this can damage the base or cause instability.

7。 トラブルシューティング

If you encounter any issues with your Ematic Universal Table Top TV Stand, refer to the following common problems and solutions:

• Stand is wobbly/unstable:
  • すべてのネジとボルトがしっかりと締められていることを確認してください。
  • スタンドが完全に平らで水平な面に置かれていることを確認します。
  • Confirm your TV's weight and size are within the stand's specifications.
• TV does not fit the mounting brackets:
  • Check your TV's VESA mounting pattern against the stand's compatibility list (100x100mm to 400x400mm).
  • Ensure you are using the correct screws, washers, and spacers from the hardware kit for your specific TV model.
• ケーブルが乱雑です:
  • Utilize the integrated cable management clip on the main support column.
  • Consider using additional cable ties or sleeves (not included) for a tidier appearance.

If these solutions do not resolve your issue, please contact Ematic customer support for further assistance.

8. 仕様

9.保証とサポート

保証情報

This Ematic product is covered by a standard 90-day warranty from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or improper installation.

カスタマーサポート

For technical assistance, warranty claims, or to report missing/damaged parts, please contact Ematic customer support. Please have your product model number (EMWT4005) and proof of purchase available when contacting support.

For the most up-to-date contact information, please visit the official Ematic webサイトまたは製品パッケージを参照してください。