導入
This manual provides essential instructions for the safe and efficient use of the Perel AC028 Intelligent Charger. This device is specifically designed for charging 12V lead-acid batteries, including Gel, AGM, and EFB types, utilizing a sophisticated 3-stage automatic charging cycle to optimize battery life and performance.
安全に関する注意事項
Always read and understand all safety warnings and instructions before operating the charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- This charger is intended for 12V lead-acid batteries (Gel, AGM, EFB) only. Do not use with other battery types.
- Battery charging can produce explosive gases. Ensure adequate ventilation during charging and keep away from flames, sparks, and smoking materials.
- バッテリーへの接続や切断を行う前に、必ず充電器を主電源から外してください。
- Avoid charging a frozen battery. Allow it to thaw before attempting to charge.
- 充電器とバッテリーは子供やペットの手の届かないところに保管してください。
- Do not expose the charger to rain or excessive moisture. The unit has an IP65 rating, meaning it is protected against dust and low-pressure water jets, but it is not submersible.
- 電源コードが損傷した場合は、危険を回避するために、製造元、サービス代理店、または同様の資格を持つ担当者が交換する必要があります。
製品の特徴
- 3-Stage Automatic Charging Cycle: Ensures optimal charging and extends battery life.
- バッテリー互換性: Designed for 12V lead-acid batteries, including Gel, AGM, and EFB types.
- 定格出力: 12 VDC、1.5A。
- IP65保護クラス: あらゆる方向からの粉塵の侵入や低圧水噴流に対して保護します。
- コンパクトなデザイン: 保管や輸送が簡単です。
仕様
| モデル | AC028 |
| 入力ボリュームtage | 220-240 VAC |
| 頻度 | 50/60Hz |
| 出力巻tage | 12VDC |
| 出力電流 | 1.5A |
| 定格電流 | 0.25A |
| 寸法(長さ×幅×高さ) | 147 x 72 x 42 ミリメートル |
| 重さ | 376グラム |
| IP保護クラス | IP65 |
| 互換性のあるバッテリータイプ | 12V Lead-Acid (Gel, AGM, EFB) |
| Main Cable Length | 1.5メートル |
| 充電ケーブルの長さ | 1メートル |
設定
- Ensure the Perel AC028 charger is disconnected from the mains power outlet.
- 赤(+)clを接続しますamp of the charger to the positive (+) terminal of the 12V lead-acid battery.
- 黒(-)clを接続しますamp of the charger to the negative (-) terminal of the 12V lead-acid battery.
- Verify that both connections are secure and properly seated to prevent arcing or poor contact.
- Plug the charger's main power cable into a suitable 220-240 VAC, 50/60 Hz mains power outlet.

操作手順
Once connected to the battery and mains power, the charger will automatically initiate its 3-stag充電プロセス。
- 電源インジケーター: The 'POWER' LED will illuminate when the charger is connected to the mains power supply.
- 充電インジケーター: The 'CHARGING' LED will illuminate when the battery is actively being charged.
- フルインジケーター: The 'FULL' LED will illuminate when the battery has reached a full charge. At this point, the charger will switch to a maintenance mode to prevent overcharging.
The charger can remain connected to the battery for extended periods for maintenance charging, ensuring the battery remains at an optimal charge level.

メンテナンス
- Regularly inspect the charger's cables, clamps、casing for any signs of damage, wear, or corrosion. Do not use the charger if any part is damaged.
- Keep the charger clean and free from dust and debris. Use a dry cloth for cleaning. Do not use solvents or abrasive cleaners.
- 充電器は使用していないときは、涼しく乾燥した換気の良い場所に保管してください。
- Ensure the battery terminals are clean before connecting the charger for optimal contact.
トラブルシューティング
The Perel AC028 charger is equipped with error indicators to help diagnose common issues:
| エラーコード | 説明 | アクション |
|---|---|---|
| F01 | Short circuit / Reverse connection / No connection | Check battery connections for correct polarity (+ to +, - to -). Ensure clamps are securely attached and there is no short circuit. |
| F02 | 接続が緩い | バッテリーがamps are tightly connected to the battery terminals. |
| F03 | バッテリーvoltag高すぎる | This charger is for 12V batteries. Ensure you are not attempting to charge a battery with a higher nominal voltage. |
| F04 | バッテリー不良 | The battery may be severely discharged, damaged, or at the end of its life. It might not be able to accept a charge. Consult a battery specialist. |

保証とサポート
For detailed warranty information, terms, and conditions, please refer to the documentation provided with your purchase or visit the official Perel website. For technical support or service inquiries, contact your retailer or the manufacturer's customer service department.