FVTLED WiFi RGB 低電圧tage LED Deck Lights Kit

1. はじめに

This manual provides detailed instructions for the installation, operation, and maintenance of your FVTLED WiFi RGB Low Voltage LED Deck Lights Kit. This kit is designed to provide versatile and customizable lighting for both indoor and outdoor environments, featuring RGB color options, smart control via WiFi, and compatibility with voice assistants.

2. 安全情報

本製品を設置または使用する前に、すべての安全に関する指示をよく読んで理解してください。これらの指示に従わない場合、感電、火災、その他の危険が発生する可能性があります。

• 設置またはメンテナンスの前に、電源が切断されていることを確認してください。
• This product operates on DC12V low voltage. Do not connect directly to AC power without the provided power supply.
• All lights and cables are IP67 waterproof, suitable for outdoor use. However, ensure all connections are securely tightened to maintain water resistance.
• Do not modify the product or its components. Any modifications may void the warranty and create safety risks.
• Keep the power supply unit in a dry, protected area, away from direct water exposure.
• 設置手順のいずれかの部分について不明な点がある場合は、資格のある電気技師に相談してください。

3. パッケージ内容

パッケージを開封したら、すべてのコンポーネントが揃っていて損傷がないことを確認してください。

• 10 x LED Inground Lights (Model D45)
• 1 x 12W LED Power Supply
• 1 x LED WiFi Controller
• 1 x 24-Key IR Remote Controller

Image 3.1: Contents of the FVTLED Deck Lights Kit, including 10 LED lights, power supply, WiFi controller, and remote control.

4. セットアップとインストール

Follow these steps for proper installation of your FVTLED deck lights:

1. 計画: Determine the desired layout for your lights. The distance between each light is approximately 1 meter (3.28 ft). Ensure the total length of connected lights does not exceed the capacity of the power supply.
2. 穴あけ: Drill mounting holes of approximately Φ1.38 inches (35mm) in diameter. The light fixture itself has a diameter of Φ1.77 inches (45mm) and a height of 1.02 inches (26mm).
3. ライトを挿入: Carefully insert each LED deck light into the drilled holes. The spring clips on the sides will secure the light in place.
4. ライトを接続する: Connect the lights in series using the male and female waterproof connectors. Ensure each connection is firmly pushed together and the screw cap is tightened to maintain the IP67 waterproof rating.
5. コントローラーに接続: Connect the string of lights to the LED WiFi Controller.
6. 電源の接続： Connect the LED WiFi Controller to the 12W LED Power Supply.
7. 電源オン: 電源装置を標準の電源コンセントに差し込みます。

Image 4.1: Detailed dimensions for drilling and a diagram illustrating the series connection of the LED deck lights to the driver.

注記： The distance between the light and the controller should be less than 3 meters for optimal performance.

5. 操作手順

5.1.リモコン操作

付属の 24 キー IR リモコンを使用すると、次の基本機能を操作できます。

• オン/オフ: ライトの電源をオンまたはオフにします。
• 色の選択: Choose from various preset colors.
• 明るさ調整: 光の強度を増減します。
• モード選択: Cycle through different dynamic lighting modes.

The remote control has an effective range of up to 15 meters.

5.2. WiFi / Smart App Control

For advanced features and smart home integration, use the dedicated mobile application.

1. アプリをダウンロード: 検索する the companion app (e.g., 'Magic Home' or similar, as indicated in the product packaging or quick start guide) on your smartphone's app store (iOS or Android).
2. WiFiに接続します： Follow the in-app instructions to connect your LED WiFi Controller to your home WiFi network. This typically involves turning the lights on and off a few times to enter pairing mode, then selecting the controller from the app and entering your WiFi credentials.
3. 色の選択: Use the app's color wheel to select from 16 million colors.
4. 明るさ調整: Precisely adjust the brightness level from 1% to 100%.
5. 動的関数： Explore various lighting modes such as gradual changes, cross fades, and strobe effects. You can also adjust the speed of these functions.
6. 音楽モード: Synchronize the lights with music played from your device or through the app's microphone sensitivity feature.
7. Camera Color Capture: Use your phone's camera to capture a color from your surroundings, and the lights will replicate it.
8. タイマー機能: Set schedules for the lights to automatically turn on/off, change colors, or activate specific functions at designated times.

Image 5.1: Smartphone app demonstrating group control of multiple FVTLED deck lights.

Image 5.2: The app interface displaying the music mode feature, allowing lights to react to sound.

Image 5.3: The app interface demonstrating the timer function for scheduling light operations.

5.3. 音声コントロール（AlexaとGoogle Home）

The FVTLED WiFi RGB Deck Lights are compatible with Amazon Alexa and Google Home for convenient voice control.

1. スキル/アクションを有効にする: In your Alexa or Google Home app, search for and enable the corresponding skill or action for your FVTLED lights (e.g., 'Magic Home' or similar).
2. アカウントをリンク: Link your FVTLED app account with your Alexa or Google Home account.
3. デバイスの検出： Alexa または Google Home に新しいデバイスを見つけるように依頼します。
4. 音声コマンド: You can now control your lights using voice commands such as:
   "Alexa, turn on the deck lights."
   "Hey Google, change deck lights to blue."
   "Alexa, dim the deck lights to 50%."

画像5.4: 元ample of using voice commands with Alexa to control the FVTLED deck lights in an outdoor setting.

5.4. Video Demonstration: WiFi Controller and App Features

6. メンテナンス

To ensure the longevity and optimal performance of your FVTLED deck lights, follow these maintenance guidelines:

• クリーニング： Periodically clean the surface of the lights with a soft, damp 布で汚れやゴミを拭き取ってください。研磨剤入りの洗剤や溶剤は使用しないでください。
• 接続チェック: Annually inspect all cable connections to ensure they remain tight and free from corrosion. Re-tighten waterproof caps if necessary.
• ケーブル検査: Check cables for any signs of damage, cuts, or fraying. Replace damaged cables immediately to prevent electrical hazards.
• 電源： Ensure the power supply unit is kept in a well-ventilated area and is not covered, to prevent overheating.

7。 トラブルシューティング

If you encounter issues with your FVTLED deck lights, refer to the following common problems and solutions:

• ライトが点灯しない:
  • Check if the power supply is properly plugged into a working outlet.
  • Verify all cable connections are secure and tightened.
  • Ensure the remote control or app is sending the 'ON' command.
  • Test the power supply with another compatible device if possible.
• WiFi接続の問題:
  • Ensure your smartphone is connected to a 2.4GHz WiFi network (5GHz networks are often not supported by smart devices).
  • Confirm the WiFi controller is within range of your router.
  • Try resetting the WiFi controller (refer to app instructions for specific reset procedures, often involves cycling power).
  • Verify that location services are enabled on your phone and allowed for the app during setup.
• リモコンが動作しない:
  • Check the battery in the remote control (1 CR2 battery required, included).
  • Ensure there are no obstructions between the remote and the WiFi controller.
  • Confirm the remote is pointed directly at the IR receiver on the controller.
• Inconsistent Light Colors/Brightness:
  • This can sometimes occur with long cable runs due to voltage drop. Ensure your setup adheres to recommended cable lengths.
  • Check for any loose connections that might be affecting power delivery to individual lights.

8. 仕様

9. 保証とサポート

This FVTLED product comes with a Limited Warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included in your package or contact FVTLED customer service directly through their official web製品を購入したサイトまたは小売店。