DIRECTV RC66RX IR/RF Remote Control User Manual

導入

This manual provides instructions for the DIRECTV RC66RX IR/RF Remote Control. This remote is designed to operate most DirecTV receivers in both Infrared (IR) and Radio Frequency (RF) modes. The RF feature allows control of the receiver without direct line-of-sight. It is compatible with various DirecTV receiver models including R16, R22, H21, H22, H23, H24, HR21, HR22, HR23, HR24, HR34, and C31. Two AA batteries are included with the remote for immediate use.

Figure 1: Two DIRECTV RC66RX Remote Controls with Batteries

設定

1. バッテリーの取り付け

1. リモコンの背面にある電池ボックスのカバーを見つけます。
2. カバーを下方にスライドさせてコンパートメントを開きます。
3. 単三電池 2 本を挿入し、プラス (+) とマイナス (-) の端子がコンパートメント内のインジケータと一致していることを確認します。
4. 電池ボックスのカバーを、カチッと音がするまで元の位置に戻します。

Figure 2: Battery Compartment of the RC66RX Remote

2. Programming for DirecTV Receiver

The RC66RX remote is typically pre-programmed to control your DirecTV receiver. If it does not respond, ensure the remote is set to the correct mode (usually 'DIRECTV' or 'SAT' if applicable, though this model primarily functions for DirecTV). For RF mode, your receiver must be compatible (R16, R22, H21, H22, H23, H24, HR21, HR22, HR23, HR24, HR34, C31). Refer to your DirecTV receiver's manual for specific RF pairing instructions if needed.

3. Programming for TV and Other Devices (IR Mode)

To control your television or other devices (e.g., AV receiver) with the RC66RX remote, you will need to program it using IR codes. This allows the remote to control functions like TV power, volume, and input.

1. Locate the mode switch at the top of the remote. Slide it to the 'TV' position.
2. Press and hold the 'MUTE' and 'SELECT' buttons simultaneously until the green light at the top of the remote blinks twice.
3. Enter the 5-digit programming code for your TV brand. You can find these codes in your DirecTV receiver's user manual or on the DirecTV support webサイト。
4. Point the remote at your TV and press the 'PWR' button. If the TV turns off, the code is correct.
5. If the TV does not turn off, repeat steps 2-4 with the next code for your TV brand.
6. Once the TV is programmed, slide the mode switch back to the 'DIRECTV' position to control your receiver.

Figure 3: Top Section of the RC66RX Remote with Mode Switch

操作手順

The DIRECTV RC66RX remote control features a comprehensive layout for easy navigation and control of your entertainment system.

Figure 4: Full Button Layout of the RC66RX Remote

キーボタンの機能:

• テレビ入力: Cycles through available video inputs on your television.
• PWR（電源）： Turns the DirecTV receiver on or off.
• ON/OFF (&TV Power): Turns the programmed television on or off.
• 形式： 画面のアスペクト比を変更します。
• 再生コントロール (再生、一時停止、停止、巻き戻し、早送り、スキップ): Controls media playback on your DirecTV receiver.
• REC（記録）: 現在の番組の録画を開始します。
• ガイド： 番組ガイドを表示します。
• アクティブ： Accesses the DirecTV Active channel for interactive services.
• リスト： 録画した番組のリストを表示します。
• EXIT： 現在のメニューまたは画面を終了します。
• バック： 前の画面またはメニューに戻ります。
• メニュー： Accesses the main DirecTV menu.
• 情報： 現在のプログラムに関する情報を表示します。
• SELECT (Center Button): メニューの選択を確定します。
• 矢印ボタン: メニューとチャンネルを移動します。
• ボリューム (+/-): Adjusts the volume of the programmed television.
• ミュート： テレビの音声をミュートします。
• CHAN PAGE（上/下）: Changes channels or pages through the guide.
• 前： 以前の状態に戻る viewedチャンネル。
• 数字キーパッド（0～9、ダッシュ、ENTER）： チャンネル番号を直接入力します。
• カラーボタン（赤、緑、黄、青）： Used for special functions within certain menus or applications.

IR vs. RF Mode

The RC66RX remote supports both Infrared (IR) and Radio Frequency (RF) modes. IR mode requires a direct line of sight between the remote and the device being controlled. RF mode uses radio waves, allowing you to control your DirecTV receiver without pointing the remote directly at it, even if the receiver is in a cabinet or another room (within range). Ensure your DirecTV receiver is RF-compatible for this feature to work.

メンテナンス

バッテリー交換

When the remote's performance degrades or it stops responding, it is likely time to replace the batteries. Follow the battery installation steps in the Setup section to replace the two AA batteries.

クリーニング

リモコンを清掃するには、柔らかく乾いた布を使用してください。頑固な汚れには、軽くamp布を水または低刺激性の非研磨性洗剤で拭いてください。刺激の強い化学薬品や過度の湿気はリモコンの電子部品に損傷を与える可能性があるため、使用しないでください。

トラブルシューティング

• リモコンが応答しない: Check if the batteries are correctly inserted and have sufficient charge. Replace batteries if necessary. Ensure the mode switch is set to the correct device (e.g., 'DIRECTV' for receiver functions).
• TV not responding to power/volume: Verify that the remote has been correctly programmed for your television using the IR programming steps. Ensure the mode switch is set to 'TV' when attempting to control TV functions.
• Buttons sticking or unresponsive: This may indicate dirt or debris under the buttons. Gently clean the remote as described in the Maintenance section. If the issue persists, the remote may need replacement.
• RF mode not working: Confirm your DirecTV receiver model is listed as RF compatible (R16, R22, H21, H22, H23, H24, HR21, HR22, HR23, HR24, HR34, C31). Ensure there are no major obstructions blocking the RF signal, although line-of-sight is not strictly required, extreme interference can affect performance.

仕様

保証とサポート

For warranty information and customer support, please refer to the documentation provided with your purchase or contact SatelliteSale customer service directly. Keep your proof of purchase for any warranty claims.