LuxPower LP-BL300

LuxPower 自転車ライトセット ユーザーマニュアル

Model: LP-BL300

1.製品オーバーview

Thank you for choosing the LuxPower Bike Light Set. This set includes a powerful 300-lumen LED headlight and a bright LED taillight, designed to enhance your visibility and safety during cycling. Both lights are rechargeable and water-resistant, making them ideal for various riding conditions.

LuxPower Bike Light Set, showing the black headlight with a clear lens and the rectangular taillight with multiple LEDs.

Image 1.1: The LuxPower Bike Light Set, featuring the main headlight unit and the compact taillight unit.

2. パッケージ内容

以下にリストされているすべてのアイテムがパッケージに含まれていることを確認してください。

  • 1 x LuxPower LED Headlight (300 Lumens)
  • 1 x LuxPower LED Taillight
  • 2 xUSB充電ケーブル
  • 1 x Headlight Mounting Bracket
  • 1 x Taillight Mounting Strap
  • ユーザーマニュアル x 1
Contents of the LuxPower Bike Light Set package, including the headlight, taillight, two USB cables, and the user manual, all laid out next to the product box.

Image 2.1: All components included in the LuxPower Bike Light Set package.

3. セットアップとインストール

3.1 ヘッドライトの取り付け

  1. Attach the headlight mounting bracket to your bicycle's handlebar. Ensure it is securely fastened and positioned centrally.
  2. Slide the LuxPower headlight onto the bracket until it clicks into place.
  3. ヘッドライトの角度を調整して、対向車の目をくらませることなく前方を照らします。
LuxPower headlight mounted on a bicycle handlebar, showing its position relative to the brake levers and shifters.

Image 3.1: The LuxPower headlight securely installed on a bicycle handlebar.

3.2 テールライトの取り付け

  1. Wrap the taillight mounting strap around your bicycle's seat post.
  2. Secure the strap firmly, ensuring the taillight is facing directly backward.
  3. Adjust the position to ensure maximum visibility from the rear.
LuxPower taillight mounted on a bicycle seat post, positioned below the saddle.

Image 3.2: The LuxPower taillight installed on a bicycle seat post.

4. 操作手順

4.1 電源オン/オフ

  • To turn on the light, press and hold the power button located on the top of the light unit for 2 seconds.
  • To turn off the light, press and hold the power button again for 2 seconds.

4.2 モード選択

Once the light is on, short press the power button to cycle through the available lighting modes:

  • 高い: Maximum brightness for optimal visibility.
  • 中くらい: 一般的な用途に適したバランスのとれた明るさ。
  • 低い: 明るさを下げてバッテリー寿命を延ばします。
  • Flash/Strobe: 昼間の視認性を高めたり、緊急時の信号として点滅パターンを表示します。

4.3 ライトの充電

Both the headlight and taillight are USB rechargeable. Use the provided USB cables for charging.

  1. Locate the USB charging port on each light unit. It is typically covered by a rubber flap to protect against water.
  2. ゴム製のフラップをゆっくりと開きます。
  3. Connect one end of the USB charging cable to the light's port and the other end to a USB power source (e.g., computer, wall adapter, power bank).
  4. The indicator light will show the charging status (e.g., red for charging, green or blue for fully charged).
  5. Once fully charged, disconnect the cable and firmly close the rubber flap to maintain water resistance.
Graphic showing both the headlight and taillight being charged via USB cables connected to a power source.

Image 4.1: Both the headlight and taillight are USB rechargeable.

Close-up of the LuxPower headlight connected to a USB cable for charging.

Image 4.2: The LuxPower headlight connected to a USB power source for charging.

Close-up of the LuxPower taillight connected to a USB cable for charging.

Image 4.3: The LuxPower taillight connected to a USB power source for charging.

5. メンテナンス

  • クリーニング: ライトユニットを柔らかくて乾いた布で拭いてください。amp 布で拭いてください。研磨剤や溶剤は使用しないでください。
  • バッテリーのケア: To prolong battery life, avoid fully discharging the lights frequently. Recharge them regularly, especially if they will be stored for an extended period.
  • ストレージ: ライトは直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
  • 耐水性: Ensure the USB port rubber flap is always securely closed when not charging to maintain water resistance.

6。 トラブルシューティング

問題考えられる原因解決
ライトが点灯しません。電池が消耗しています。付属のUSBケーブルを使用してライトを充電します。
ライトが充電されません。USB ケーブルまたは電源の問題。Try a different USB cable or a different USB power source. Ensure the cable is fully inserted.
ライトが突然ちらついたり暗くなったりする。バッテリー残量が少なくなりました。ライトを充電してください。
Mounting bracket feels loose.Bracket not tightened sufficiently.Ensure the bracket is securely tightened to the handlebar/seat post.

7. 仕様

特徴仕様
ブランドラックスパワー
モデル番号LP-BL300
輝度300 Lumens (Headlight)
設定数4 (High, Medium, Low, Flash/Strobe)
材料ステンレス鋼
耐水性レベル防水仕様(IPX6)
取り付けタイプHandlebar Mount (Headlight), Seat Post Mount (Taillight)
欧州連合755702029490

8. 保証とサポート

LuxPower products are manufactured to high-quality standards. For information regarding warranty coverage, returns, or technical support, please refer to the contact information provided on the product packaging or visit the official LuxPower webサイト。

保証請求のために購入証明書を保管してください。

© 2023 LuxPower. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.