エバーブライト E003006A

EverBrite E003006A 2-in-1 ミニLEDランタン&懐中電灯 取扱説明書

モデル:E003006A

導入

Welcome to your EverBrite 2-in-1 Mini LED Lantern and Flashlight. This versatile device combines the functionality of a powerful flashlight with a convenient area lantern, designed for portability and ease of use in various situations. This manual will guide you through its features, setup, operation, and maintenance to ensure optimal performance.

製品の特徴

  • 2-in-1デザイン: Telescopes from a compact flashlight to an extended lantern.
  • コンパクトで軽量: Measures approximately 4 inches tall (compact) with a 1.5-inch diameter and weighs 2.29 ounces (65g), making it highly portable.
  • 3つの照明モード: Features High, Low, and Strobe modes, easily selectable via the ON/OFF button.
  • Zoomable Flashlight: Adjustable beam focus for close-range floodlight or long-range spotlight (up to 99ft/30m) by twisting the flashlight head.
  • 取り外し可能なフック: Includes a convenient hook for hanging the lantern in tents, on branches, or other suitable locations.
  • 電源: Each unit operates on 3 x AAA Alkaline batteries (6 AAA batteries included for a 2-pack).
  • 耐久性のある構造: Made from matte plastic.
  • 輝度: Provides 60 lumens of light output.

設定

バッテリーの取り付け

Your EverBrite 2-in-1 Mini LED Lantern and Flashlight requires 3 AAA batteries per unit. These are included with your purchase.

  1. Unscrew the bottom cap of the device.
  2. Insert 3 AAA batteries into the battery holder, ensuring correct polarity (+/-) as indicated inside the compartment.
  3. 底のキャップをしっかりと締め直してください。
Diagram showing the internal components of the EverBrite 2-in-1 Mini Lantern and Flashlight, including the battery holder with AAA batteries, power button, lantern section, and flashlight lens.
図1:内部 view showing battery installation and key components.

詳細 view of the EverBrite 2-in-1 Mini Lantern and Flashlight, highlighting the battery holder, power button, and the distinction between the flashlight and lantern sections. Batteries are pre-installed but require a small paper tab removal for first use.

操作手順

電源オン/オフとモードの選択

The device features a rubberized ON/OFF button located at the base. Press the button to cycle through the lighting modes:

  • 初回プレス: High mode (brightest setting).
  • セカンドプレス: Low mode (dimmer setting).
  • XNUMX 回目のプレス: Strobe mode (flashing light).
  • XNUMX 回目のプレス: デバイスの電源をオフにします。
Illustration of the EverBrite 2-in-1 Mini Lantern and Flashlight's three lighting modes: High, Low, and Strobe, with an arrow pointing to the power button for cycling through modes.
Figure 2: Cycling through the High, Low, and Strobe lighting modes.

This image demonstrates how to cycle through the three distinct lighting modes by repeatedly pressing the power button.

懐中電灯モード

To use the device as a traditional flashlight, ensure it is in its compact, unextended form. The light will emit a focused beam from the top lens.

ランタンモード

To activate the lantern mode, gently pull the top section of the device upwards. This action extends the white diffuser, providing 360-degree area lighting suitable for illuminating a wider space.

Comparison image showing the EverBrite device in two configurations: on the left, it is extended as a lantern, hanging from a tree branch; on the right, it is compact as a flashlight, held in a hand, illuminating a leaf.
Figure 3: EverBrite device in Lantern Mode (left) and Flashlight Mode (right).

This image illustrates the dual functionality, showing the device extended for broad area illumination as a lantern and compressed for a focused beam as a flashlight.

Zoom Function (Flashlight Mode Only)

When the device is in flashlight mode, you can adjust the beam's focus. Twist the orange ring at the top of the device to transition the light from a wide floodlight to a narrow, concentrated spotlight.

Two images demonstrating the zoom function of the EverBrite flashlight. The left image shows a wide beam (Zoom in), and the right image shows a narrow, focused beam (Zoom out), achieved by twisting the top part of the flashlight.
Figure 4: Adjusting the flashlight beam using the zoom function.

This visual guide demonstrates how to easily adjust the light beam from wide to narrow by twisting the top of the flashlight.

Official Product Video: EverBrite 2 Pack Mini Flashlight Lantern Set

ビデオ1: 公式製品終了view demonstrating the features and functionality of the EverBrite 2-in-1 Mini Flashlight Lantern Set, including its transformation from flashlight to lantern and various lighting modes.

This video provides a comprehensive demonstration of the EverBrite 2-in-1 Mini Flashlight Lantern Set, showcasing its compact design, the transition between flashlight and lantern modes, and the different light settings.

メンテナンス

  • クリーニング: デバイスを清潔で乾燥した状態に保ちます。外側は柔らかくて乾いた布で拭いてください。amp 必要に応じて布で拭いてください。研磨剤入りの洗剤や溶剤の使用は避けてください。
  • バッテリーのケア: Remove batteries if the device will not be used for an extended period (e.g., several months) to prevent potential battery leakage and damage to the unit.
  • ストレージ: Store the lantern/flashlight in a cool, dry place away from direct sunlight and extreme temperatures.

トラブルシューティング

問題考えられる原因解決
ライトが点灯しない電池切れまたは電池の取り付け間違いCheck battery polarity, replace with fresh AAA batteries. Ensure the protective tab (if any) has been removed.
光が暗い、またはちらつくバッテリー残量が少ない3 本の AAA 電池をすべて新しいものと交換してください。
Cannot switch between modesボタンの故障または電池切れEnsure batteries are fresh. Press the button firmly and deliberately. If the issue persists, contact customer support.
Flashlight beam is not adjustable機構の障害または損傷Ensure no debris is obstructing the twisting mechanism. Avoid forcing the mechanism.

仕様

  • ブランド: エバーブライト
  • モデル番号: E003006A
  • Product Dimensions (Compact): 長さ1.5インチ x 幅1.5インチ x 高さ3.94インチ
  • 商品の重量: 2.29オンス(65グラム)
  • 光源の種類: 発光ダイオード(LED)
  • 輝度: 60ルーメン
  • 電源: 電池駆動
  • 電池のタイプ: 3 x AAA Alkaline batteries (per unit)
  • 電池付属: Yes (6 AAA batteries for 2 units)
  • 材料: マットプラスチック
  • 仕上げタイプ: マットプラスチック
  • 耐水性レベル: 耐水性はありません
  • 取り付けタイプ: Tabletop Mount, Removable Hook
  • 国際コード: 820909741800
Image showing the EverBrite 2-in-1 Mini Lantern and Flashlight next to a smartphone for scale, illustrating its compact dimensions of 4 inches (100mm) when closed and 5.5 inches (140mm) when extended, with a diameter of 1.5 inches (38mm).
Figure 5: Product dimensions and size comparison.

This image provides a visual representation of the compact size of the EverBrite device, comparing it to a standard smartphone and detailing its dimensions in both compact and extended forms.

保証とサポート

For warranty information or technical support regarding your EverBrite 2-in-1 Mini LED Lantern and Flashlight, please refer to the product packaging or contact EverBrite customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.