PIXEL TW-DC0

Pixel LCD Wireless Shutter Release Remote Control TW283-DC0 for Nikon Cameras

Model: TW-DC0 | Brand: PIXEL

1. はじめに

This manual provides comprehensive instructions for the setup and operation of your Pixel TW283-DC0 Wireless Shutter Release Remote Control. This device is designed to offer versatile control over your Nikon camera's shutter functions, including single shot, continuous shooting, bulb mode, delay shooting, and advanced timer schedule shooting. It operates wirelessly, providing flexibility for various photographic scenarios.

Pixel TW283-DC0 Wireless Shutter Release Remote Control showing the transmitter, receiver, and connecting cable.

Figure 1: Pixel TW283-DC0 Wireless Shutter Release Remote Control components.

2. パッケージ内容

  • TW-283 Transmitter x 1
  • TW-283 Receiver x 1
  • Shutter Connecting Cable DC0 x 1
  • ユーザーマニュアル x 1

3.製品オーバーview

The Pixel TW283-DC0 system consists of a transmitter (remote control) and a receiver unit, connected to your camera. Both units feature an LCD screen for settings and status display.

Detailed diagram of the Pixel TW283 transmitter and receiver with numbered components.

Figure 2: Transmitter (left) and Receiver (right) components.

送信機（TX）コンポーネント:

  1. LEDライトインジケーター
  2. 電源スイッチ、バックライト付きボタン
  3. 番号追加ボタン
  4. 左シフトボタン
  5. 設定/確認ボタン
  6. 液晶画面
  7. タイマースケジュール開始/停止ボタン
  8. 数値削減ボタン
  9. 右シフトボタン
  10. Focus Button/Shutter Button

受信機（RX）コンポーネント:

  1. LEDライトインジケーター
  2. 電源スイッチ、バックライト付きボタン
  3. 液晶画面
  4. バックライト/チャンネル追加ボタン

4. セットアップ

4.1 バッテリーの取り付け

The transmitter requires two AAA batteries, and the receiver requires two AAA batteries. Batteries are not included in the package. Open the battery compartments on the back of both units and insert the batteries according to the polarity indicators.

4.2 カメラへの接続

Attach the receiver unit to your camera's hot shoe. Connect one end of the provided DC0 shutter connecting cable to the receiver's input port and the other end to your camera's remote control terminal.

Pixel TW283 receiver mounted on a camera's hot shoe, with the cable connected.

図 3: カメラに接続された受信機。

Diagram showing how to connect the 3.5mm jack cable to the receiver and the camera.

Figure 4: Shutter connecting cable diagram.

4.3チャンネル設定

To ensure proper communication, the transmitter and receiver must be set to the same channel. The Pixel TW283 offers 30 channels to avoid interference.

  1. Turn on both the transmitter and receiver by long-pressing their respective power buttons.
  2. On the transmitter, use the left and right arrow buttons to navigate to the 'CH' (Channel) mode. Press the 'SET' button to enter parameter adjustment.
  3. On the receiver, simultaneously press the 'CH-' and 'CH+' buttons to enter parameter adjustment.
  4. Adjust the channel number on both units using the up/down buttons on the transmitter and 'CH-'/'CH+' buttons on the receiver until they match. Press 'SET' on the transmitter and both 'CH-'/'CH+' again on the receiver to confirm.
  5. To activate the screen backlight, gently press the light button on the transmitter or long-press the light button on the receiver.

Video 1: Demonstration of setting channels and various shooting modes on the Pixel TW283 wireless remote control.

5。 動作モード

The Pixel TW283-DC0 offers multiple shooting modes to suit different photographic needs. Ensure your camera's shooting mode is set appropriately for the desired remote control function.

Diagram illustrating four shutter release modes: Single shot, Continuous, Bulb, and Delay.

Figure 5: Four Shutter Release Modes.

5.1 シングルシューティング

For taking a single photograph.

  • Set the transmitter to single shot mode.
  • Set your camera to single shot mode.
  • Half-press the shutter button on the transmitter to focus, then full-press to release the shutter.

5.2 連続撮影

For taking multiple photographs in quick succession.

  • Set the transmitter to continuous mode.
  • Set your camera to continuous shooting mode (e.g., high-speed continuous).
  • Half-press the shutter button on the transmitter to focus, then press and hold to start continuous shooting. Release to stop.

5.3 Bulb (Long Exposure) Shooting

For exposures longer than typically available in standard camera settings.

  • Set the transmitter to bulb mode.
  • Set your camera to bulb mode.
  • Press the shutter button on the transmitter once to open the shutter. Press it again to close the shutter.

5.4 Delay Shooting

Allows for a set delay before the shutter is released, useful for self-portraits or reducing camera shake.

  • Set the transmitter to delay mode.
  • Adjust the delay time from 1 to 59 seconds.
  • Adjust the number of shots from 1 to 99.
  • Press the start button to initiate the countdown and shooting sequence.

5.5 Timer Schedule Shooting (Intervalometer)

This advanced mode allows for complex timed shooting sequences, ideal for time-lapse photography.

Diagram illustrating six timer functions: Timer delay, Timer exposure, Timer interval, Number of shots, Time of repeat program timer, and Number of loops repeat program.

Figure 6: Six Timer Functions.

次のパラメータを設定できます。

  • 遅れ： Delay before the first shutter release (0s to 99h 59m 59s).
  • 長いです： Exposure time for each shot (0s to 99h 59m 59s). This is used in conjunction with Bulb mode on the camera.
  • INTVL（インターバル）: Time between each shot (0s to 99h 59m 59s).
  • N1 (Number of Shots): The number of photos to take in each sequence (1 to 999).
  • 繰り返す： The delay before the entire sequence repeats (0s to 99h 59m 59s).
  • N2 (Number of Loops): The number of times the entire sequence will repeat (1 to 99, or '--' for unlimited).

To set these parameters, enter the timer mode on the transmitter and use the navigation buttons to adjust values. Press the 'SET' button to confirm each parameter. Once all parameters are set, press the 'Start/Stop' button to begin the timer schedule shooting.

Example of intervalometer use for time-lapse photography, showing a flower blooming.

Figure 7: Intervalometer in use for time-lapse photography.

6. 仕様

  • 製品寸法: 5.71 x 1.57 x 0.71インチ
  • 商品の重量: 0.004オンス
  • 商品モデル番号: TW-DC0
  • 電池: 4 AAA batteries required (2 for transmitter, 2 for receiver)
  • 無線範囲: 最大80メートル（262フィート）
  • チャンネル: 30
  • 特集: 人間工学に基づいたデザイン
  • 色： 黒
  • サポートされるデバイスの最大数: 1 (per remote system)
  • 対応デバイス: Camera (Nikon Z8, Z9, D1, D2, D3, D3s, D4, D4s, D5, D6, D800, D850, D800E, D810, D810A, D700, D500, D300s, D300, D200, F6, F100, F5, F90X, F90, N90s, D1X, D2H, D3X; Fujifilm S5 Pro, S3 Pro; DCS-14N, MC-30, MC-36A)

7。 トラブルシューティング

  • 電源なし: Ensure fresh AAA batteries are correctly installed in both the transmitter and receiver.
  • No Connection/Shutter Release:
    • 送信機と受信機が同じチャンネルに設定されていることを確認します。
    • Check that the shutter connecting cable is securely plugged into both the receiver and the camera.
    • Ensure the camera's remote control settings are correctly configured.
    • Confirm the camera is powered on and in a compatible shooting mode.
  • 干渉： If experiencing unreliable connection, try changing to a different channel on both the transmitter and receiver.
  • 限定範囲: Ensure there are no significant obstructions between the transmitter and receiver. The maximum wireless range is approximately 80 meters (262 feet).

8. 保証とサポート

保証情報やテクニカルサポートについては、ご購入時に付属の説明書をご参照いただくか、メーカーに直接お問い合わせください。保証請求の際に必要となるため、購入証明書は保管してください。