PWR+ AC Adapter Instruction Manual for Booster PAC Jump Starters

1. はじめに

This manual provides instructions for the safe and effective use of the PWR+ AC Adapter, model PWR-TAH19012N. This adapter is designed to provide power and charge compatible Booster PAC and CarStart jump starter models.

Image 1: The PWR+ AC Adapter with its integrated power cord.

2. 重要な安全情報

Read all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• ULリスト： This PWR+ AC Adapter is Tested, Approved, and Certified by UL/ULC (Underwriters Laboratories). The unique E475124 number is verifiable on the UL website, ensuring compliance with safety standards.
• 屋内使用のみ: Use this adapter in dry, indoor environments only. Do not expose to rain or moisture.
• 適切な換気: Ensure adequate ventilation around the adapter during use. Do not cover the adapter or place it in an enclosed space.
• ダメージを避ける: コードまたはプラグが損傷している場合は、アダプタを使用しないでください。アダプタを開けたり修理したりしないでください。
• 内蔵保護機能: The adapter features Short Circuit Protection (SCP), Over Current Protection (OCP), Over Voltage Protection (OVP), and Over Temperature Protection (OTP) for enhanced safety.

Image 2: UL certification logo and a visual comparison highlighting the safety certification of the PWR+ adapter.

3. パッケージ内容

パッケージには次のアイテムが含まれています:

• 1 x PWR+ AC Adapter (Model: PWR-TAH19012N)

Image 3: The PWR+ AC Adapter shown with its packaging.

4. セットアップ手順

1. アダプターを検査します。 Before first use, visually inspect the AC adapter and its cord for any signs of damage. Do not use if damaged.
2. デバイスに接続します: Locate the charging port on your compatible Booster PAC or CarStart jump starter. Insert the barrel connector of the PWR+ AC Adapter firmly into the device's charging port.
3. 電源コンセントに接続します。 Plug the AC adapter's two-prong plug into a standard 110-240V wall outlet. Ensure the outlet is easily accessible.

The adapter features an extra-long 6.7 ft cord for flexible placement.

5. 操作手順

Once connected, the PWR+ AC Adapter will begin charging your Booster PAC or CarStart jump starter. The charging indicator on your jump starter will typically illuminate or change state to indicate charging status. Refer to your jump starter's manual for specific charging indicators.

• 充電時間: Charging time varies depending on the jump starter model and its current battery level.
• 切断: Once your device is fully charged, disconnect the adapter from the wall outlet first, then from your jump starter.
• 継続的な接続: While the adapter has built-in safety features, it is generally recommended to disconnect the charger once the device is fully charged to prolong battery life.

6. 互換性

This PWR+ AC Adapter is compatible with a wide range of Booster PAC and CarStart jump starter models, including but not limited to:

• Booster PAC ES6000, ES5000, ES5000C, ES2500, ES2500C, ES2500KE, ES1224
• Booster PAC J850, J900, J1000, J2000 Truck Pac Charger
• Booster PAC P/N: ESA214, ESA217, ESA218, ESA22, 141-003-000, 141-004-000, 141-337-000, DC1500500, GPU48180500WDOO, GPU481801000WD00
• CarStart CS1000, CS1200 Power Battery Booster
• Solar ES6000, ES6000KE, ES5000SOL, ES5000ESP5500, TCB-ESA217, ESA22, ES2500KE, ES2500SOL, ES2500KE, ESA217, ES5000ESP5500, J900-SOL, ESA-22, J850 Truck Pac Battery Booster Jump Starter

画像4: 元ample of a compatible device, the Booster PAC ES2500 jump starter.

7. 仕様

画像5: 詳細 view of the adapter's internal cable structure and built-in safety protections.

8。 トラブルシューティング

• デバイスが充電されない:
  • Ensure the adapter is securely plugged into both the jump starter and the wall outlet.
  • 別のデバイスを接続して、壁のコンセントが機能していることを確認します。
  • Check if your jump starter model is listed in the compatibility section.
  • Inspect the adapter cord and connector for any visible damage.
• アダプターの過熱:
  • アダプタが換気の良い場所に設置され、覆われていないことを確認してください。
  • 過熱が続く場合は使用を中止し、カスタマー サポートにお問い合わせください。

9. お手入れとメンテナンス

• クリーニング： Disconnect the adapter from power before cleaning. Use a dry, soft cloth to wipe the adapter. Do not use liquid cleaners.
• ストレージ： Store the adapter in a cool, dry place away from direct sunlight and moisture when not in use. Avoid wrapping the cord too tightly around the adapter to prevent damage.
• 取り扱い： アダプタを落としたり、強い衝撃を与えたりしないでください。

10. 保証とサポート

This PWR+ AC Adapter comes with a 30日間の返金ポリシー そして 24ヶ月間の交換保証. PWR+ is a company based in Washington, USA, committed to customer satisfaction.

For warranty claims, technical support, or any inquiries, please contact PWR+ customer service through the retailer where the product was purchased or visit the official PWR+ webサイト。