Protmex ワイヤレス気象ステーション PT3378 ユーザーマニュアル

1. はじめに

The Protmex PT3378 Wireless Weather Station provides comprehensive environmental monitoring for both indoor and outdoor conditions. This device features a vibrant color display that shows outdoor temperature and humidity, indoor temperature and humidity, a 12-hour weather forecast, moon phase, time, date, and barometric pressure. It also includes an alarm clock with a snooze function and a USB charging port for external devices. The wireless outdoor sensor transmits data up to 60 meters, ensuring accurate readings from your desired location.

2. パッケージ内容

• Protmex PT3378 Main Weather Station Unit
• ワイヤレス屋外センサー（1台）
• 電源アダプター
• ユーザーマニュアル（このドキュメント）

3.製品オーバーview

3.1 メインディスプレイユニット

The main unit features a large LCD display and various control buttons. Refer to the image below for a detailed view of the display elements.

画像1: Protmex PT3378 Main Display Unit. This image highlights key display areas: A1 Remote Temperature, A2 Remote Humidity, A3 Remote Temperature Alert, A4 Time/Calendar or Alarm time, A5 Moon Phase, A6 Barometric pressure, A7 Histogram showing 24-hour atmospheric pressure trend, A8 Indoor Humidity, A9 Indoor comfort, A10 Indoor Temperature, A11 Weather Forecasting.

3.2 ワイヤレス屋外センサー

The outdoor sensor measures external temperature and humidity and transmits data wirelessly to the main unit. It includes a small LCD display and control buttons for configuration.

画像2: Protmex PT3378 Wireless Outdoor Sensor. Components include: C1 LCD Display (Temperature), C2 LCD Display (Humidity), C3 Transmit Signal LED, C4 °C/°F Button, C5 TX Button, C6 Channel 1 or 2 or 3 Button, C7 Battery Compartment.

3.3 Main Unit Back Panel and Controls

The back of the main unit houses the battery compartment, power input, USB charging port, and various setting buttons.

画像3: Protmex PT3378 Main Unit Back Panel and Side Controls. This view shows the Snooze/Backlight touch area, hanging hole, battery compartment, USB Changer Output Socket (5V-1A), Power Supply Socket (DC 5V 1.2A), and various control buttons for time, alarm, settings, and memory functions.

4. セットアップ

4.1 本体の電源供給

1. 電池を挿入します（オプションのバックアップ）： Open the battery compartment on the back of the main unit (refer to Image 3). Insert 4 AA batteries (not included), observing the correct polarity (+/-). These batteries serve as a backup in case of power outages。
2. 電源アダプタを接続: Plug the included power adapter into the Power Supply Socket (DC 5V 1.2A) on the back of the main unit (refer to Image 3). Plug the other end into a standard wall outlet. The display will light up.

4.2 ワイヤレス屋外センサーのインストール

1. バッテリーの挿入： Open the battery compartment on the back of the outdoor sensor (refer to Image 2, C7). Insert 2 AA batteries (not included), observing the correct polarity (+/-).
2. チャンネルを選択： On the outdoor sensor, use the "Channel 1 or 2 or 3" button (C6) to select a transmission channel (e.g., Channel 1). Ensure this channel matches the setting on the main unit during pairing.
3. 配置: Place the outdoor sensor in a shaded, dry location away from direct sunlight and rain to ensure accurate readings. Avoid placing it near large metal objects or electronic devices that could interfere with the wireless signal. The maximum transmission range is approximately 60 meters.

4.3 Pairing the Sensor with the Main Unit

1. Ensure both the main unit and the outdoor sensor have power.
2. The main unit will automatically search for the outdoor sensor. This may take a few minutes. The remote temperature and humidity readings (A1, A2) will appear on the display once connected.
3. If the sensor does not connect, press and hold the "MEM" button on the main unit for a few seconds to initiate a manual search. On the outdoor sensor, press the "TX" button (C5) to send a signal.

5. 操作手順

5.1 時刻と日付の設定

Press the "TIME" button on the side of the main unit to enter time setting mode. Use the "UP" and "DOWN" buttons to adjust values, and press "TIME" again to confirm and move to the next setting (e.g., hour, minute, 12/24 hour format, year, month, day).

画像4: Example of time and date display on the weather station.

5.2 目覚まし時計とスヌーズ機能

「アラーム」ボタンを押すと view or set the alarm time. Use the "UP" and "DOWN" buttons to adjust. To activate/deactivate the alarm, use the alarm on/off shift switch on the side of the unit (refer to Image 3). When the alarm sounds, touch the "Snooze / Backlight" area (refer to Image 3) to activate snooze for a few minutes.

5.3 温度単位の選択（°C/°F）

On the main unit, press the "TEMP" button to switch between Celsius (°C) and Fahrenheit (°F) for temperature display. The outdoor sensor also has a dedicated "°C/°F" button (C4) to change its local display unit.

5.4ディスプレイの明るさ調整

When powered by the AC adapter, the display offers four brightness levels. Use the "LIGHT" button on the side of the unit to cycle through these levels. When operating on batteries, the backlight will automatically turn off after 8 seconds to conserve power.

5.5天気予報

The weather station predicts weather conditions for the next 12 hours based on atmospheric pressure trends. The forecast is displayed using six distinct symbols:

• 晴れ
• 曇り
• 曇り
• 雨
• 大雨
• 雪

画像5: Various weather forecast symbols displayed on the main unit.

画像6: Close-up of a weather forecast symbol, indicating sun and clouds.

5.6 月齢表示

The main unit displays the current moon phase (A5, refer to Image 1) based on the set date and time.

画像7: Graphic representation of the moon phase on the display.

5.7USB充電ポート

The main unit includes a USB output port (5V-1A) on its back panel (refer to Image 3), allowing you to charge compatible smartphones or other small electronic devices.

6. 配置ガイドライン

Optimal placement of both the main unit and the outdoor sensor is crucial for accurate readings and reliable wireless communication.

6.1 メインユニットの配置

• Place the main unit indoors, in a central location, away from direct sunlight, heat sources, or drafts that could affect indoor temperature readings.
• Ensure it is within the 60-meter wireless range of the outdoor sensor.
• The unit can be placed on a table or mounted on a wall using the hanging hole on the back (refer to Image 3).

画像8: Main unit placed on a table indoors, receiving data from an outdoor sensor.

6.2 屋外センサーの配置

• Mount the outdoor sensor in a location that is protected from direct precipitation and direct sunlight. A shaded area under an eaves or porch is ideal.
• Ensure it is not near any heat-emitting appliances (e.g., air conditioning units, vents) or reflective surfaces that could skew temperature readings.
• Avoid placing it directly on the ground or near large metal structures that could block the wireless signal.

画像9: Illustration of wireless data transmission between the indoor display and the outdoor sensor, demonstrating optimal placement for both units.

画像10: Example of an outdoor sensor mounted on a wooden wall, illustrating suitable placement.

7. メンテナンス

7.1 電池の交換

• 本体: If using batteries for backup, replace all 4 AA batteries when the low battery indicator appears on the display.
• 屋外センサー： Replace the 2 AA batteries in the outdoor sensor when its low battery indicator appears or if data transmission becomes unreliable.
• Always replace all batteries in a set with new ones of the same type.

7.2 クリーニング

• 本体と屋外センサーを柔らかくて乾いた布で拭いてください。amp 布。
• 研磨剤入りのクリーナーや溶剤はディスプレイやコンピュータを損傷する恐れがあるので使用しないでください。asing.

8。 トラブルシューティング

• 屋外の温度/湿度の読み取りなし:
    - Check if the outdoor sensor has fresh batteries and is powered on.
    - Ensure the outdoor sensor is within range (max 60 meters) and not obstructed by large metal objects.
    - Verify the channel selected on the outdoor sensor matches the main unit's setting.
    - Press the "TX" button on the outdoor sensor and initiate a manual search on the main unit (hold "MEM" button).
• 温度/湿度の測定値が正しくありません:
    - Ensure both units are placed away from direct sunlight, heat sources, or extreme drafts.
    - For the outdoor sensor, ensure it is protected from rain and direct moisture.
• ディスプレイが暗い、またはオフになっている:
    - Ensure the AC power adapter is securely connected and plugged into a working outlet.
    - If running on batteries, the backlight turns off after 8 seconds to save power. Touch the "Snooze / Backlight" area to temporarily illuminate.
    - Replace main unit batteries if using them for backup.
• 時刻/日付が正しくありません:
    - Manually set the time and date as described in Section 5.1.

9. 仕様

10. 保証とサポート

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Protmex customer service directly. Contact details are typically available on the manufacturer's official webサイトまたは製品パッケージに記載されています。