PASCO PS-2002 Xplorer GLX Graphing Logger User Manual

1. はじめに

This manual provides comprehensive instructions for the operation, maintenance, and troubleshooting of the PASCO PS-2002 Xplorer GLX Graphing Logger. The Xplorer GLX is a versatile data acquisition device designed for scientific experimentation and analysis, capable of functioning both as a standalone unit and as a computer interface.

図1: フロント view of the PASCO PS-2002 Xplorer GLX Graphing Logger. This device features a large LCD screen for data display, function buttons (F1-F4) for quick access, a central navigation pad, a numeric keypad for data entry, and a power button at the bottom. The casing is a translucent blue with green accents on the primary control buttons.

2. 主な特徴

The PASCO PS-2002 Xplorer GLX offers a range of features designed for robust data logging and analysis:

• 統合センサー: Includes 2 temperature sensors, a sound sensor, and a voltageセンサー。
• Universal Sensor Ports: Four dedicated PASPORT sensor ports for compatibility with over 60 PASPORT sensors.
• ハイSampリンレート： Capable of a maximum 50,000 Hz sampling rate for precise data capture.
• 内部ストレージ: Equipped with 12 MB of built-in flash memory for data storage.
• 接続性: Two USB ports for connecting to computers, external storage, or peripherals like a mouse and keyboard.
• 力： Powered by a rechargeable 1700 mAH NiMH Battery.
• 画面： Large backlit LCD for clear visibility in various lighting conditions.
• スタンドアロン操作: Functions independently for data collection, analysis, annotation, storage, and printing without a computer.
• コンピューターインターフェース： Can connect to a computer to utilize PASCO Capstone software for advanced analysis.

3. セットアップと初期使用

3.1 開梱とコンポーネント

開梱したら、すべてのコンポーネントが揃っていることを確認してください。

• PASCO PS-2002 Xplorer GLX unit
• Rechargeable 1700 mAH NiMH Battery (pre-installed or separate)
• USBケーブル（充電およびコンピュータ接続用）
• 電源アダプタ（含まれている場合）

3.2 バッテリーの充電

1. Connect the USB cable to the GLX unit's USB port.
2. USB ケーブルのもう一方の端を電源アダプタまたはコンピュータの USB ポートに接続します。
3. Allow the unit to charge fully before first use. The charging indicator will provide status.

3.3 電源のオン/オフ

• 電源を入れるには、 力 button (usually located at the bottom of the keypad) until the screen illuminates.
• 電源を切るには、 を長押しします 力 シャットダウンプロンプトが表示されるまでボタンを押し続け、確認します。

3.4 センサーの接続

The GLX features four universal PASPORT sensor ports. To connect a sensor:

1. Align the sensor's connector with one of the PASPORT ports on the GLX.
2. Gently push the sensor into the port until it clicks into place.
3. The GLX should automatically detect the connected sensor.

4. 操作手順

4.1 ナビゲーション

The Xplorer GLX uses an icon-based operating system. Navigation is primarily done using the central directional pad and function buttons (F1-F4).

• 方向パッド: Use the up, down, left, and right arrows to move between menu items or data points. The center button typically acts as a selection or confirmation button.
• 機能ボタン（F1～F4）： These buttons correspond to on-screen labels and provide quick access to specific functions or menus.
• ESCボタン： Used to go back to the previous screen or cancel an operation.
• テンキー： For entering numerical values or text (using multi-press for letters).

4.2 Data Collection

1. 測定単位を選択: From the main menu, navigate to the desired measurement setup (e.g., Graph, Digits, Table).
2. 設定を構成する: を調整するampling rate, duration, and trigger conditions as needed for your experiment.
3. Start Collection: を押す 遊ぶ button (often a green triangle icon) to begin data collection.
4. Stop Collection: を押す 停止 button (often a square icon) to end data collection.

4.3 Data Analysis and Review

The GLX allows for basic on-device data analysis:

• グラフ View: Display collected data as a graph. Use navigation buttons to zoom or pan.
• 統計： Access statistical tools (mean, min, max, standard deviation) for selected data ranges.
• Linear Curve Fits: Perform basic linear regression on graphical data.
• 注釈: Add text notes or recorded voice messages to data points or entire runs.

4.4コンピューターへの接続

For advanced analysis and data management, connect the GLX to a computer:

1. Ensure PASCO Capstone software is installed on your computer.
2. Connect the GLX to your computer using a USB cable.
3. The GLX will be recognized as a device within Capstone, allowing data transfer and real-time monitoring.

5. メンテナンス

5.1 クリーニング

To maintain the device's condition:

• 本体の外側を柔らかい布で拭いてください。amp 布。
• 研磨剤や溶剤は使用しないでください。
• Ensure no liquid enters the sensor ports or USB ports.

5.2バッテリーケア

• Recharge the NiMH battery regularly to maintain its lifespan.
• バッテリーを頻繁に完全に放電することは避けてください。
• If storing the unit for an extended period, ensure the battery is partially charged (around 50%).

5.3 ストレージ

Store the Xplorer GLX in a cool, dry place, away from direct sunlight and extreme temperatures.

6。 トラブルシューティング

7. 仕様

8.サポートと保証

For technical support, product inquiries, or warranty information, please contact PASCO scientific directly. Refer to the official PASCO scientific web最新の連絡先情報と保証ポリシーについては、こちらのサイトをご覧ください。

メーカー: パスコ

発売日: 19年2017月XNUMX日