LeMotech ABS Plastic Dustproof Waterproof IP65 Junction Box (11.8" x 9.8" x 4.7") Instruction Manual

1.製品オーバーview

The LeMotech ABS Plastic Dustproof Waterproof IP65 Junction Box is designed to protect electrical connections in various environments. Constructed from high-quality ABS plastic, it offers excellent impact resistance and electrical insulation. Its IP65 rating ensures protection against dust and water ingress, making it suitable for both indoor and outdoor applications.

主な特徴:

• 頑丈な構造: Made of high-quality ABS plastic for excellent impact resistance and electrical insulation.
• 安全で認定済み: CE RoHS compliant and IP65 waterproof rated, free of hazardous substances.
• 屋内および屋外での使用: Water-resistant and dustproof design effectively blocks splashing water, rain, dust, snow, oil, and UV. Features rustproof screws for secure sealing.
• 幅広い用途: Suitable for residential wiring, connecting electrical devices (light fixtures, switches, outlets), and protecting electrical equipment for machines and motors.
• Pre-drilled Entry Holes: Features pre-drilled entry holes with removable rubber stoppers for cable entry.
• Internal Mounting Points: Convenient interior mounting holes for installing circuit boards, DIN rails, or panels.

Figure 1: LeMotech ABS Plastic Dustproof Waterproof IP65 Junction Box.

2. パッケージ内容

パッケージにすべてのアイテムが揃っていることを確認します。

• 1 x LeMotech ABS Plastic Dustproof Waterproof IP65 Junction Box (11.8" x 9.8" x 4.7")
• Built-in rubber grommet (pre-installed in the lid)
• 4 x Stainless steel screws (M3*15) for box cover
• 4 x Self-tapping screws (M5x40) for box mounting
• 拡張ボルト x 4

Figure 2: Included components with the LeMotech Junction Box.

3. セットアップとインストール

Follow these steps for proper installation of your LeMotech Junction Box:

1. 箱を準備する:
   • Unscrew the four stainless steel screws on the lid and carefully remove the lid.
   • Identify the desired cable entry points. The box features pre-drilled entry holes with rubber stoppers.
   • For cable entry, carefully cut or remove the appropriate rubber stopper(s) to create an opening suitable for your cable diameter. Ensure the opening is snug to maintain the IP65 seal.
   • If mounting internal components (e.g., circuit boards, DIN rails), utilize the self-contained mounting holes inside the box.
2. ボックスをマウントします。
   • Position the junction box on the desired mounting surface. The box has designated areas for mounting screws on the back.
   • Mark the locations for the mounting screws.
   • Drill pilot holes if necessary, considering the type of mounting surface. For masonry or concrete, use the provided expansion bolts.
   • Secure the box to the surface using the self-tapping screws (M5x40) or appropriate fasteners for your application.
3. 結線：
   • Route your electrical cables through the prepared entry holes.
   • Make all necessary electrical connections inside the box according to local electrical codes and safety standards.
4. 箱を封印する:
   • Ensure the built-in rubber grommet around the lid is properly seated and free from debris.
   • Place the lid back onto the box, aligning the screw holes.
   • Tighten the four stainless steel screws (M3*15) evenly to ensure a tight, waterproof seal. Do not overtighten.

Figure 3: Detail of the rubber stopper and rubber grommet, essential for maintaining the IP65 waterproof rating.

Figure 4: Illustration of the cable entry holes, compatible with NPT 1" thread type, and the removable rubber caps.

4. 操作

Once installed, the LeMotech IP65 Junction Box operates passively by providing a secure and protected enclosure for your electrical components. Its primary function is to shield internal wiring and devices from environmental factors such as dust, water, and physical impact.

• 環境保護: The IP65 rating ensures that the enclosure is dust-tight and protected against water jets from any direction, making it suitable for outdoor and harsh industrial environments.
• 耐衝撃性 The ABS plastic construction provides a durable barrier against accidental impacts, protecting sensitive electrical components.
• 電気絶縁: The non-conductive ABS material offers inherent electrical insulation, enhancing safety.

Figure 5: Visual representation of the box's waterproof, dustproof, and shock-resistant properties.

5. メンテナンス

Regular maintenance ensures the longevity and continued protective performance of your junction box:

• 定期点検： Annually inspect the box for any signs of physical damage, cracks, or degradation of the ABS plastic.
• シールの完全性: Check the rubber grommet around the lid and the rubber stoppers in the cable entry holes for wear, tears, or displacement. Ensure they are clean and properly seated to maintain the waterproof seal. Replace if damaged.
• ネジの締め付け具合: Periodically check that all lid screws are securely tightened. Do not overtighten, as this can damage the plastic or compromise the seal.
• クリーニング： 箱の外側を広告できれいにするamp cloth to remove dirt, dust, or debris. Avoid using harsh chemicals or abrasive cleaners that could damage the plastic.
• 内部チェック: If safe to do so and power is disconnected, occasionally open the box to inspect internal components for moisture, corrosion, or loose connections.

6。 トラブルシューティング

一般的な問題とその解決策:

• Issue: Water or Dust Inside the Box.
  • 解決： Check the rubber grommet on the lid for proper seating and damage. Ensure all four lid screws are tightened evenly. Verify that the rubber stoppers in unused cable entry holes are fully intact, and that stoppers used for cables are cut snugly around the cable and properly inserted. Consider applying a small amount of silicone sealant around cable entry points if issues persist.
• Issue: Difficulty Tightening Lid Screws.
  • 解決： Ensure the lid is correctly aligned with the box. The screws are designed to create a tight seal; apply firm, even pressure while turning. If screws are cross-threaded or stripped, they may need replacement.
• Issue: Cables do not fit through rubber stoppers.
  • 解決： The rubber stoppers are designed to be cut to size. Use a sharp utility knife or scissors to carefully enlarge the opening in the stopper to accommodate your cable, ensuring a tight fit to maintain the waterproof seal. Avoid cutting the opening too large.

7. 仕様

Figure 6: External dimensions of the junction box.

Figure 7: Internal dimensions and thickness of the junction box.

8. 保証とサポート

LeMotech products are designed for durability and performance. For any questions, technical assistance, or warranty claims, please contact LeMotech customer support through the retailer where the product was purchased or visit the official LeMotech store online.

詳細については、 LeMotech Store.