AMD Wraith Max Cooler with RGB LED Fan (Model 199-999575) User Manual

1. はじめに

This manual provides detailed instructions for the installation, operation, and maintenance of your AMD Wraith Max Cooler with RGB LED Fan. This high-performance CPU cooler is designed to efficiently dissipate heat from your processor, ensuring stable and optimal system performance. Please read this manual thoroughly before installation and use.

Image 1.1: The AMD Wraith Max Cooler, featuring a black fan with an illuminated red RGB LED ring and a heatsink base with copper heat pipes.

2. 安全情報

• コンポーネントをインストールまたは削除する前に、必ずコンピューターの電源を切ってください。
• Handle the cooler and CPU with care to avoid damage to pins or components.
• 静電放電 (ESD) を防止するために適切な接地を確保してください。
• お子様の手の届かない場所に保管してください。
• Do not operate the cooler if the fan blades are obstructed or damaged.

3. パッケージ内容

パッケージにすべてのアイテムが含まれていることを確認します。

• AMD Wraith Max CPU Cooler with pre-applied thermal paste (or a small tube of thermal compound).
• RGB LED connection cable (may vary by version, e.g., 4-pin or 5-pin).
• Mounting brackets (if not pre-attached or integrated with the cooler). Note: Some versions may require existing motherboard mounting hardware.

4. 仕様

5. セットアップとインストール

Follow these steps carefully to install your AMD Wraith Max Cooler. It is recommended to install the cooler with the motherboard removed from the PC case for easier access, especially if you are not experienced with CPU cooler installations.

1. マザーボードを準備します。 Ensure your motherboard has the standard AMD AM4 retention bracket installed. If not, install the appropriate backplate and retention clips according to your motherboard's manual.
2. CPU表面をきれいにする: If replacing an old cooler, carefully clean any old thermal paste from the CPU's integrated heat spreader (IHS) using isopropyl alcohol and a lint-free cloth.
3. サーマルペーストを塗布します。 The Wraith Max Cooler often comes with pre-applied thermal paste. If not, apply a small pea-sized amount of thermal paste to the center of the CPU's IHS. Do not spread it manually; the pressure from the cooler will spread it evenly.
4. クーラーの位置: Carefully align the cooler over the CPU, ensuring the mounting clips on the cooler align with the retention bracket tabs on the motherboard.
5. クーラーを固定する:
   • Hook the non-lever side of the cooler's mounting clip onto the corresponding tab of the motherboard retention bracket.
   • While applying gentle, even pressure, push down the lever on the opposite side of the cooler until it locks onto the second tab of the retention bracket. This step may require firm pressure.
6. ファン電源を接続: Connect the 4-pin fan cable from the cooler to the "CPU_FAN" header on your motherboard.
7. RGBケーブルを接続します: Connect the RGB LED cable from the cooler to the appropriate RGB header on your motherboard (e.g., 4-pin 12V RGB header). Refer to your motherboard manual for the correct header location and type.

画像5.1: 拡大 view of the AMD Wraith Max Cooler's heatsink and heat pipes, crucial for efficient heat transfer.

6. 操作手順

Once installed, the AMD Wraith Max Cooler operates automatically, adjusting fan speed based on CPU temperature. The RGB LED lighting can be controlled via your motherboard's RGB software.

• ファン操作： The fan speed is controlled by the motherboard's BIOS/UEFI settings or operating system software, typically based on CPU temperature. Ensure the fan is spinning freely after system startup.
• RGB照明コントロール:
  • Install the RGB control software provided by your motherboard manufacturer (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync).
  • Use the software to customize the color, effects, and brightness of the RGB LEDs on your Wraith Max Cooler.
  • If your motherboard lacks an RGB header or compatible software, the cooler may default to a specific color (e.g., red) or remain unlit, depending on the specific cooler version.

7. メンテナンス

Regular maintenance helps ensure optimal cooling performance and extends the lifespan of your cooler.

• ダストクリーニング： Periodically (every 3-6 months, or more often in dusty environments) use compressed air to clean dust from the heatsink fins and fan blades. Ensure the fan does not spin rapidly during cleaning to prevent damage to the bearings.
• サーマルペースト: Thermal paste typically lasts for several years. If you notice increased CPU temperatures, consider reapplying fresh thermal paste. This involves carefully removing the cooler, cleaning old paste from both the CPU and cooler base, and applying new paste before reinstallation.
• ファンの検査: Check the fan for any signs of damage, unusual noises, or obstructions. Replace the cooler if the fan is damaged or malfunctioning.

8。 トラブルシューティング

• 高いCPU温度:
  • クーラーがしっかりと取り付けられ、CPU としっかりと接触していることを確認します。
  • Verify that the fan is spinning. If not, check the fan power connection to the motherboard.
  • Check if thermal paste was applied correctly or needs reapplication.
  • ヒートシンクのフィンに蓄積したほこりを取り除きます。
  • PC ケース内の適切な空気の流れを確保します。
• ファンが回転しない:
  • Check the 4-pin fan cable connection to the "CPU_FAN" header on the motherboard.
  • Verify fan settings in the motherboard's BIOS/UEFI.
  • ファンブレードが遮られていないことを確認してください。
• RGB Lights Not Working/Incorrect Color:
  • Check the RGB LED cable connection to the motherboard's RGB header. Ensure it's connected to the correct type of header (e.g., 12V GRB for 4-pin).
  • マザーボードの RGB ソフトウェアが正しくインストールされ、設定されていることを確認します。
  • Ensure the RGB cable is fully seated and not damaged.

9. 保証とサポート

For warranty information and technical support, please refer to the official AMD webご購入いただいたサイトをご覧いただくか、販売店にお問い合わせください。保証請求の際に購入証明書を保管してください。

さらにサポートが必要な場合は、次のサイトを参照してください。 AMD サポート webサイト.