Amazon Basics 12V 150 PSI デジタルタイヤインフレーター ユーザーマニュアル

導入

Thank you for choosing the amazon basics Compact Portable 12V 150 PSI Digital Tyre Inflator. This manual provides essential information for the safe and efficient operation of your new device. Please read it thoroughly before use and retain it for future reference.

This compact and portable tyre inflator is designed for convenient inflation of vehicle tyres (cars, motorcycles, scooters) and other inflatable items. It features a digital gauge for precise pressure settings, an auto-shutoff function, and a built-in LED light for visibility in low-light conditions.

安全情報

怪我や損傷を防ぐために、常に次の安全ガイドラインに従ってください。

• 破裂の危険性: Do not adjust the regulator to result in an output pressure greater than the marked maximum pressure of the attachment.
• 怪我のリスク： Do not direct the air stream at your body or other individuals.
• 環境への暴露: Do not expose the device to rain. Store indoors in a dry place.
• 車のバッテリーが消耗するのを防ぐため、インフレータを使用するときは必ず車のエンジンを動かしてください。
• Do not operate the inflator for more than 10 minutes continuously. Allow a 10-minute cool-down period after each operation.

パッケージ内容

開梱したら、以下の品目がすべて揃っていることを確認してください。

• 1 x amazon basics Digital Tyre Inflator (Model AC010225C)
• ユーザーマニュアル x 1
• キャリングケース x 1
• 1 x 12V Cigarette Lighter Power Cord (integrated)
• 1 x Air Hose (integrated)
• 2 x Inflation Attachments (for balls, balloons, etc.)
• 1xスペアヒューズ
• 2 x Warning Cards

Image: The amazon basics Digital Tyre Inflator neatly stored within its carrying case.

製品の特徴

• Compact 12-volt portable tyre inflator.
• Plugs into a standard 12V cigarette lighter port.
• Maximum pressure rating of 150 PSI.
• Airflow capacity: 22 L/M (liters per minute) at 0 PSI.
• 10-foot power cord for extended reach.
• 23.6-inch air hose for easy connection to tyres.
• Digital gauge with auto-shutoff capability for precise inflation.
• Built-in LED light for illumination in dark environments.

画像: クローズアップ view of the digital display, 'SET' button, arrow buttons, and 'OFF/COMPRESSOR ON' and 'FLASH OFF/LIGHT' buttons.

設定

1. Unpack the Inflator: Remove the tyre inflator and its accessories from the carrying case.
2. Locate Power Cord and Air Hose: The power cord and air hose are stored within compartments on the device. Gently pull them out.
3. 電源に接続: Insert the 12V cigarette lighter plug into your vehicle's 12V accessory socket. Ensure the vehicle's engine is running to provide adequate power and prevent battery drain.
4. Attach Air Hose to Tyre: Screw the air hose connector onto the tyre valve stem until it is securely fastened. For other inflatables, use the appropriate inflation attachment.

Image: The rear of the inflator, illustrating the integrated storage for the air hose and the 12V power cord.

操作手順

1. 電源オン: Once connected to the 12V power source, the digital display will illuminate, showing the current tyre pressure.
2. 希望の圧力を設定します: Press the 'SET' button to cycle through pressure units (PSI, BAR, KPA). Use the '+' and '-' buttons to adjust the target pressure.
3. インフレを開始します: Press the 'COMPRESSOR ON' button to begin inflation. The compressor will automatically stop once the preset pressure is reached.
4. インフレを監視する: Keep an eye on the digital display during inflation.
5. LED ライトの使用: Press the 'LIGHT' button to turn on the built-in LED flashlight for use in dark conditions. Press again to turn off.
6. 切断: Once inflation is complete and the compressor has stopped, press 'COMPRESSOR OFF', then carefully unscrew the air hose connector from the tyre valve.
7. ストレージ： Coil the air hose and power cord back into their designated storage compartments. Store the inflator in its carrying case.

Image: The digital tyre inflator connected to a car tire, actively inflating it.

重要な操作上の注意:

• The maximum continuous run time for the inflator is 10 minutes. After 10 minutes of operation, allow the device to cool down for at least 10 minutes before resuming use. This prevents overheating and extends product life.
• For optimal performance and safety, always refer to your vehicle's owner's manual for recommended tyre pressure.

メンテナンス

• クリーニング： インフレータの外側を柔らかくて乾いた布で拭いてください。amp 布で拭いてください。研磨剤入りの洗剤を使用したり、デバイスを水に浸したりしないでください。
• ストレージ： Store the inflator in its carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
• ヒューズの交換: The 12V cigarette lighter plug contains a replaceable fuse. If the inflator stops working, check and replace the fuse if necessary. A spare fuse is included in the package.

トラブルシューティング

• インフレータがオンにならない:
  • Ensure the 12V cigarette lighter plug is fully inserted into the vehicle's socket.
  • Check the vehicle's 12V accessory socket for power.
  • Inspect the fuse in the 12V plug and replace if blown.
• インフレータは動作しますが、膨張しません：
  • Ensure the air hose is securely screwed onto the tyre valve stem.
  • Check for any leaks in the air hose or connections.
• Inflator overheats and shuts off:
  • This is a safety feature. Allow the device to cool down for 10 minutes before resuming operation. Avoid continuous operation beyond 10 minutes.

仕様

Image: Visual representation of the inflator's dimensions: 18.59 cm length, 17.81 cm width, and 7.37 cm height.

製品終了view ビデオ

Watch this video for an unboxing and overview of the amazon basics Digital Tyre Inflator, demonstrating its components and initial handling.

保証とサポート

For customer service and warranty-related inquiries, please refer to the contact information provided with your purchase documentation or visit the official amazon basics support page.

保証請求のために購入証明書を保管してください。