BMC RESmart GII Auto CPAP E-20A-H with Humidifier User Manual

1. はじめに

This manual provides essential information for the safe and effective operation, setup, and maintenance of your BMC RESmart GII Auto CPAP System E-20A-H with Humidifier. Please read this manual thoroughly before using the device and retain it for future reference. This device is intended for the treatment of Obstructive Sleep Apnea (OSA).

2. 安全情報

重要な安全上の警告：

• Always disconnect the device from the power supply before cleaning or performing any maintenance.
• デバイスを水やその他の液体に浸さないでください。
• Use only accessories and parts recommended by BMC.
• Keep the device away from direct sunlight, heat sources, and sharp objects.
• Consult your physician or healthcare provider if you experience any unusual symptoms or discomfort during use.
• このデバイスは生命維持を目的としたものではありません。

3.製品オーバーview

The BMC RESmart GII Auto CPAP System E-20A-H is an intelligent device designed for the treatment of Obstructive Sleep Apnea. It features an integrated humidifier for enhanced comfort.

主要コンポーネント:

• 本体: Houses the motor, control electronics, and display.
• 加湿器： Integrated unit with dual water chambers for efficient humidification.
• 3.5インチLCDディスプレイ: Provides real-time information and access to settings.
• コントロールノブ： メニューを移動したり設定を調整したりします。
• 空気吹き出し口： Connects to the CPAP tubing.
• パワーインレット： 電源アダプタを接続します。
• SDカードスロット: For compliance data storage and retrieval (iCode II).
• SpO2 Kit Port (Optional): For real-time blood oxygen saturation and pulse rate monitoring.

An image showing the BMC RESmart GII Auto CPAP device, featuring its main unit, control knob, and integrated humidifier. The device is black with a clear humidifier chamber visible.

4. セットアップ

4.1 開梱

1. パッケージからすべてのコンポーネントを慎重に取り出します。
2. デバイスと付属品に損傷がないか点検してください。損傷がある場合は使用しないでください。

4.2 電源の接続

1. Connect the power adapter to the power inlet on the back of the device.
2. 電源コードを適切な電源コンセントに差し込みます。

4.3 Filling the Humidifier

1. Open the humidifier chamber by sliding or lifting the cover.
2. Fill the water chamber with distilled water up to the maximum fill line. Do not overfill.
3. 加湿器チャンバーをしっかりと閉じます。

4.4 Connecting Tubing and Mask

1. Connect one end of the CPAP tubing to the air outlet on the device.
2. Connect the other end of the tubing to your prescribed CPAP mask.
3. Fit the mask comfortably and securely according to its own instructions.

5. 操作手順

5.1 Starting Therapy

1. Ensure the device is properly set up and connected.
2. マスクを着用してください。
3. Press the Start/Stop button (usually the control knob) to begin therapy. The device will automatically start delivering air.

5.2 設定の調整

Use the control knob to navigate the menu on the 3.5-inch LCD display. Press the knob to select an option and rotate to adjust values.

• 圧力範囲: 4-20 cm H2O (Auto CPAP adjusts automatically within this range).
• Ramp 時間： Adjusts the time (0-60 minutes) for the pressure to gradually increase to the prescribed level.
• Humidification Level: Select from Off or levels 1-5 to control the humidity output.
• Reslex: Pressure relief feature (Off/1/2/3) for exhalation comfort.
• 自動オン/オフ： Can be enabled or disabled (Off by default).

5.3 Stopping Therapy

Press the Start/Stop button again to end therapy. The device will power down.

5.4 iCode II Data Retrieval

Compliance data is encoded by a QR code displayed on the device's screen. Use a compatible application to scan the QR code for quick data retrieval and monitoring.

6. メンテナンス

Regular cleaning and maintenance are crucial for the optimal performance and longevity of your device.

6.1毎日の清掃

• Humidifier Water Chamber: Empty any remaining water and rinse with distilled water. Allow to air dry.
• マスク： Wipe down the mask cushion with a damp cloth or specialized CPAP wipes.

6.2毎週の清掃

• Humidifier Water Chamber: Wash with mild soap and warm water. Rinse thoroughly and allow to air dry completely.
• CPAPチューブ: Wash with mild soap and warm water. Rinse thoroughly and hang to air dry.
• エアフィルター: Inspect the reusable air filter (if applicable). If dirty, rinse under running water and allow to air dry. Replace disposable filters as recommended.

6.3一般的なケア

• デバイスの外側を広告で拭きますamp cloth. Do not use abrasive cleaners or immerse the device.
• Replace air filters regularly as per manufacturer recommendations or if visibly dirty.

7。 トラブルシューティング

問題が発生した場合は、次の一般的な問題と解決策を参照してください。

If the problem persists, contact your healthcare provider or the manufacturer's customer support.

8. 仕様

9. 保証とサポート

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. For technical support, service, or questions regarding your BMC RESmart GII Auto CPAP System, please contact the seller or the manufacturer directly.