Relaxdays 10018934
Relaxdays 2X Ceiling Bike Rack Pulley System Instruction Manual
モデル: 10018934
導入
This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Relaxdays 2X Ceiling Bike Rack Pulley System. Please read this manual thoroughly before use and retain it for future reference.
安全情報
- Ensure the mounting surface (ceiling joists or solid concrete) can support the weight of the bike rack and the bicycle (up to 30 kg).
- Use appropriate mounting hardware for your ceiling type. The included hardware may not be suitable for all surfaces.
- Always secure the rope properly after raising the bicycle to prevent accidental lowering.
- 最大耐荷重30kgを超えないようにしてください。
- 操作中は可動部分に手や指を近づけないでください。
- Regularly inspect all components for wear, damage, or loose connections. Replace worn or damaged parts immediately.
- Keep children and pets away from the bike rack during installation and operation.
パッケージ内容
インストールを開始する前に、すべてのコンポーネントが揃っていることを確認してください。
- 2x Ceiling Mounting Brackets with Pulleys
- 2x Bike Hooks with Pulleys and Straps
- 1x Rope (approx. 15 meters)
- 1x Rope Cleat
- 取り付け金具(ネジ、アンカー)


セットアップとインストール
Follow these steps carefully to install your bike rack system. It is recommended to have a second person assist during installation.
ステップ 1: 取り付け位置を決定する
Choose a location on your ceiling that provides sufficient space for your bicycle to be lifted without obstruction. Ensure the area is clear of light fixtures, pipes, or other obstacles. The two main mounting brackets should be spaced according to the length of your bicycle, typically aligning with the handlebars and the seat post.

Step 2: Mount the Ceiling Brackets
- Position the two ceiling mounting brackets on the ceiling. The bracket with the rope locking mechanism should be placed where you intend to operate the pulley system.
- Mark the drilling points for each bracket. Ensure they are aligned and parallel.
- 天井の材質に適したドリルビットを使用して下穴を開けます。
- Insert wall anchors (if necessary) and secure the brackets firmly to the ceiling using the provided screws or suitable alternatives.

Step 3: Thread the Rope
- Thread the rope through the pulleys on the ceiling brackets and the bike hooks as shown in the diagram or video.
- Ensure the rope runs smoothly through all pulleys and the locking mechanism.
- Tie a secure knot at the end of the rope that attaches to the bike hook.

Step 4: Install the Rope Cleat
Mount the rope cleat on a wall at a convenient height, allowing you to easily secure the rope after raising the bicycle.
Installation Video Demonstration
For a visual guide on the installation process, please watch the following video:
操作手順
Lifting a Bicycle
- Lower the bike hooks by releasing the rope from the cleat and gently pulling the rope to allow the hooks to descend.
- Position your bicycle directly beneath the hooks.
- Carefully attach one hook to the handlebars and the other to the seat post. The hooks are padded to protect your bicycle's frame.
- Pull the rope to raise the bicycle. The pulley system will reduce the effort required.
- Once the bicycle is at the desired height, secure the rope firmly to the rope cleat. Ensure the locking mechanism on the pulley engages to prevent accidental lowering.

Lowering a Bicycle
- Carefully release the rope from the cleat.
- While holding the rope securely, gently allow the bicycle to descend.
- Once the bicycle is at a manageable height, unhook it from the rack.
- Raise the empty hooks to prevent them from being an obstruction.
メンテナンス
- 定期点検: すべてのネジ、ボルト、接続部がしっかりと締まっているかどうかを定期的に確認してください。
- ロープの状態: Inspect the rope for any signs of fraying, wear, or damage. Replace the rope if any deterioration is observed.
- Pulley Function: Ensure the pulleys rotate freely and are not obstructed. Lubricate if necessary with a suitable lubricant.
- Hook Padding: Check the rubber padding on the hooks for wear. This padding protects your bicycle's finish.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Bicycle does not lift smoothly. | Rope tangled or pulleys obstructed. | Check rope path for tangles. Ensure pulleys are clean and lubricated. |
| Rope slips from locking mechanism. | Rope not properly secured or mechanism worn. | Ensure rope is fully engaged in the locking mechanism. Inspect mechanism for wear; replace if damaged. |
| ラックを取り付けた後、不安定に感じます。 | Improper mounting or unsuitable ceiling material. | Re-check all mounting screws and anchors. Ensure installation is into solid joists or appropriate anchors for concrete. Consult a professional if unsure. |
仕様
- ブランド: リラックスデイズ
- モデル: 10018934
- 色: 黒
- 材料: 10% Plastic, 90% Iron
- 製品寸法: 9 x 25 x 7.5 cm (per bracket)
- 商品の重量: 1.53キロ
- 最大積載量: 30キロ
- Max. Ceiling Height: 最大4メートル
- 特別な機能: Frame protection (padded hooks), Pulley lifting system
保証とサポート
For warranty information or technical support, please refer to the official Relaxdays web公式サイトをご覧いただくか、直接カスタマーサービスにお問い合わせください。連絡先は通常、製品パッケージまたはブランドの公式オンラインチャネルに記載されています。
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.