1. はじめに
This manual provides detailed instructions for the installation, operation, and maintenance of your HIIXHC Personal Security Window & Door Alarm Bell. This wireless magnetic sensor alarm system is designed to enhance the security of your home, apartment, office, or other spaces by alerting you to unauthorized entry through doors or windows.
2. 安全情報
- バッテリーの安全性: Use only AAA batteries as specified. Do not mix old and new batteries, or different types of batteries. Dispose of used batteries responsibly.
- 大音量のアラーム： The alarm produces a sound of 90 dB or more. Avoid prolonged exposure to the alarm sound at close range to prevent potential hearing discomfort.
- 配置: Ensure the alarm is mounted securely to prevent it from falling and causing injury or damage.
- 子供たち： Keep the alarm and its components out of reach of small children to prevent choking hazards.
3. パッケージ内容
Your HIIXHC Personal Security Window & Door Alarm Bell package includes:
- HIIXHC Alarm Units (Quantity as per pack size, e.g., 10 units for a 10-pack)
- Magnetic Sensor Units (Corresponding quantity)
- Double-sided Adhesive Pads (Pre-applied or included separately)
注意: 単4電池は付属していないため、別途購入する必要があります。
4.製品オーバーview
Each HIIXHC alarm unit consists of two main parts: the main alarm unit and a smaller magnetic sensor unit. These two parts work together to detect when a door or window is opened.
Image: Multiple HIIXHC Personal Security Window & Door Alarm Bell units, each consisting of a main alarm unit and a smaller magnetic sensor.
5. セットアップ
Follow these steps to set up your HIIXHC alarm system:
- バッテリーの取り付け:
- Gently slide open the battery compartment cover on the main alarm unit.
- 正しい極性（+/-）を確認して、単4電池2本を挿入します。
- 電池カバーをしっかりと閉じてください。
Image: A detailed diagram illustrating the process of inserting two AAA batteries into the main alarm unit and the subsequent steps for mounting the alarm and magnetic sensor on a door or window frame.
- アラームの取り付け:
- Identify the desired location on your door or window frame. Ensure the surface is clean and dry.
- Peel off the protective backing from the double-sided adhesive on the back of both the main alarm unit and the magnetic sensor unit.
- メイン警報ユニットをドアまたは窓枠に取り付けます。
- Attach the magnetic sensor unit to the moving part of the door or window (the door itself or the window sash).
- 重要な調整: Position the magnetic sensor unit directly adjacent to the main alarm unit. The distance between the two parts must be less than 0.59 inches (approximately 1.5 cm) when the door or window is closed. Proper alignment ensures the alarm functions correctly.
Image: A HIIXHC alarm unit and its magnetic sensor mounted on a door frame, demonstrating proper placement for detection.
6. 操作手順
- 電源オン/オフ: Locate the ON/OFF switch on the side of the main alarm unit. Slide the switch to the 'ON' position to activate the alarm. Slide it to the 'OFF' position to deactivate.
- アラームトリガー: When the alarm is active (ON position) and the door or window is opened, the main alarm unit and the magnetic sensor unit will separate. If the distance between them exceeds 0.59 inches, the alarm will emit a loud sound (90 dB or more).
- アラームリセット： The alarm will stop sounding when the door or window is closed, bringing the main unit and magnetic sensor back within the 0.59-inch proximity.
Image: A visual representation of the alarm's operation, showing the alarm activated when the two parts of the sensor are separated and stopped when they are recombined.
Image: An illustration depicting the HIIXHC alarm sounding loudly within a room, indicating its high decibel output.
7. メンテナンス
- バッテリー交換: When the alarm sound becomes weak or inconsistent, it is time to replace the batteries. Follow the battery installation steps (Section 5.1).
- クリーニング： Wipe the alarm units with a soft, dry cloth. Do not use abrasive cleaners or immerse the units in water.
- 接着チェック: Periodically check the adhesive pads to ensure the units remain securely attached. If an alarm unit falls off, clean the surface and reapply with new strong double-sided adhesive if necessary.
8。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Alarm does not sound when door/window opens. | 1. 電池が切れているか、正しく取り付けられていません。 2. Alarm is in 'OFF' position. 3. Magnetic sensor is too far from the main unit. | 1. 電池を交換し、極性を確認します。 2. Slide switch to 'ON'. 3. Re-position units to ensure gap is less than 0.59 inches. |
| Alarm sounds weakly or intermittently. | バッテリー残量が少なくなっています。 | 電池を交換してください。 |
| Alarm unit falls off surface. | Adhesive is weak or surface was not clean. | Clean surface thoroughly and reapply with new, stronger double-sided adhesive. |
9. 仕様
- モデル番号: C2I26-AP13065
- 電源: 単2電池XNUMX本（別売）
- 巻tage: 3 ボルト (DC)
- 騒音レベル: >= 90 Decibels
- 制御方法: Touch (ON/OFF switch)
- 取り付けタイプ: Adhesive (Door Mount, Window Mount)
- 最大センサー範囲: 0.59インチ（1.5 cm）
- センサー技術: 接触センサー（磁気式）
- 材料： プラスチック
- 製品寸法: 長さ1.2インチ x 幅0.7インチ x 高さ3.6インチ（本体）
- 商品の重量: 8オンス（1個あたり、おおよそ）
10. 保証とサポート
For any questions, concerns, or support regarding your HIIXHC Personal Security Window & Door Alarm Bell, please contact the seller or manufacturer through your purchase platform. Please refer to your purchase documentation for specific warranty details.