LaiPuDuo RGBW Wall-Mounted Touch Panel Dimmer Switch User Manual

1. はじめに

The LaiPuDuo RGBW Wall-Mounted Touch Panel Dimmer Switch is designed for controlling various LED light sources, including point light sources, flexible light strips, and wall washer lamps. It features a glass panel design and a high-precision capacitance touch control chip for enhanced touch sensitivity and reduced false triggers. This controller allows for various lighting effects such as jump change, gradual change, and strobe, based on application requirements.

2. パッケージ内容

パッケージにすべてのアイテムが揃っていることを確認してください:

• 1 x RGBW Full Color Touch Panel Controller
• ユーザーマニュアル x 1

Image: The LaiPuDuo RGBW Touch Panel Controller shown next to its product packaging box.

3. 技術仕様

• 動作温度: -20°C ～ 60°C
• 供給量tage: DC 12-24V
• 出力チャンネル： 4チャンネル
• 接続モード: 共通アノード
• 外形寸法： L86 × W86 × H37mm (3.39 x 3.39 x 1.46 inches)
• 正味重量： 128グラム
• 静的消費電力: <1W
• 出力電流: <4A (each channel)
• 出力: 12V: <192W, 24V: <384W
• 材料： Glass (panel), Metal (contact)
• 制御方法: 触る
• 取り付けタイプ: 壁掛け
• 接続プロトコル: Wi-Fi (as per specifications, though primary control is touch)
• 国際保護等級: IP54

4. インストール

Follow these steps for proper installation of the RGBW Touch Panel Dimmer Switch:

1. 配線の準備: Ensure the power supply is disconnected before beginning installation. Identify the input (DC12-24V) and output (RGBW) terminals on the back of the controller.
2. LEDストリップを接続します: Connect the corresponding wires from your RGBW LED light strip to the output terminals (R, G, B, W, and + for common anode) on the controller.
3. 電源の接続： Connect the DC12-24V power supply wires to the input terminals (+ and -) on the controller.
4. マウントコントローラー: Securely mount the controller to the wall using appropriate mounting hardware (not included).
5. 電源アダプタを接続: Once all connections are secure, connect the power adapter to the power source.

Image: The rear of the controller displaying the input and output wiring terminals for power and LED strip connections.

インストールビデオガイド

Video: This video demonstrates the wiring process for connecting the RGBW controller to an LED strip and power supply, followed by a demonstration of its basic operation.

5. 操作手順

The touch panel provides intuitive control over your LED lighting. Refer to the image below for button layout and functions.

Image: The front of the touch panel controller, showing the color wheel, power button, mode, speed, and white light controls.

• Power Button (Center Circle): Touch to turn the LED lights on or off.
• カラーホイール: Slide your finger around the color wheel to select a desired RGB color. The LED strip will change to the selected color.
• White Light (W Button): Touch the 'W' button to activate or adjust the dedicated white light channel.
• モードボタン: 事前にプログラムされたさまざまなダイナミック照明モードを切り替えます。
• Speed Buttons (Left/Right Arrows): ダイナミック照明モードの速度を調整します。

操作ビデオガイド

Video: This video demonstrates the functionality of the touch panel, including color selection via the color wheel, switching between RGB and white light, and adjusting modes and speeds.

6. メンテナンス

To ensure the longevity and proper functioning of your touch panel dimmer switch:

• クリーニング： The glass panel can be cleaned with a soft, dry cloth. Avoid abrasive cleaners or harsh chemicals that may damage the surface.
• 環境： Operate the device within the specified working temperature range (-20°C to 60°C). Avoid exposure to extreme moisture or direct sunlight.
• 力： Always disconnect power before performing any maintenance or wiring adjustments.

7。 トラブルシューティング

If you encounter issues with your RGBW Touch Panel Dimmer Switch, refer to the following common problems and solutions:

• ライトが点灯しない:
  • 電源が正しく接続され、指定された DC12-24V を供給しているかどうかを確認します。
  • Verify that the LED strip is properly connected to the output terminals.
  • Ensure the power button on the touch panel is activated.
• Incorrect colors or incomplete color display:
  • Confirm that the RGBW wires from the LED strip are connected to the correct corresponding terminals on the controller (R to R, G to G, B to B, W to W).
  • Ensure the common anode (+) wire is correctly connected.
  • Check if the LED strip itself is functioning correctly by testing it with another controller if possible.
• Touch panel is unresponsive:
  • Ensure the panel is clean and dry. Moisture or dirt can affect touch sensitivity.
  • Temporarily disconnect and reconnect the power supply to reset the controller.
• White light or RGB colors do not operate simultaneously:
  • This controller is designed to switch between RGB colors and the dedicated white channel. Simultaneous operation of RGB and the separate white channel is not supported. You must select either an RGB color or the white light function.

8. 保証とサポート

保証情報やテクニカルサポートについては、販売元またはメーカーに直接お問い合わせください。購入証明書として、ご購入時のレシートを保管してください。