HTW HTWTV100ESS

HTW HTWTV100ESS Vertical Electric Water Heater User Manual

Model: HTWTV100ESS | Capacity: 100 Liters | Power: 1.5 kW

1. はじめに

Thank you for choosing the HTW HTWTV100ESS Vertical Electric Water Heater. This manual provides essential information for the safe installation, operation, and maintenance of your appliance. Please read these instructions carefully before use and retain them for future reference.

2. 重要な安全上の注意事項

警告: Failure to follow these safety instructions could result in electric shock, fire, property damage, or personal injury.

  • Ensure the water heater is installed by a qualified professional in accordance with local regulations and codes.
  • メンテナンスやサービスを実行する前に、必ずユニットの電源を切ってください。
  • 給湯器が損傷または故障している場合は、使用しないでください。
  • The pressure relief valve must be installed and regularly checked to ensure proper operation. Do not block or tampこのバルブで。
  • 可燃物を給湯器から遠ざけてください。
  • Do not allow children to operate or play near the water heater.
  • 電源の接地が適切であることを確認してください。
  • この機器は屋内設置専用に設計されています。

3.製品オーバーview および機能

The HTW HTWTV100ESS is a vertical electric water heater designed for efficient hot water supply. Key features include:

  • 容量: 100リットル
  • 出力: 1.5キロワット
  • 圧力逃し弁: Essential safety component to prevent overpressure.
  • Incoloy 840 Heating Element: Provides durability and efficient heating.
  • Anti-corrosion Magnesium Anode: Extends the lifespan of the tank and heating element, especially in hard water areas.
  • Sapphire Enamel Steel Tank: 堅牢で長期にわたるパフォーマンスを保証します。
  • External Thermometer: Displays the current water temperature inside the tank.
  • 調節可能な温度: Allows users to set the desired water temperature precisely.
  • Electrolytic Sleeves: Act as insulators to prevent galvanic corrosion between dissimilar materials in the installation, thereby enhancing durability.
  • 垂直設置: Designed specifically for vertical mounting.
HTW HTWTV100ESS Vertical Electric Water Heater

図3.1: 前面 view of the HTW HTWTV100ESS Vertical Electric Water Heater, showing the external thermometer and water inlet/outlet connections.

HTW HTWTV100ESS Features Diagram

Figure 3.2: Diagram illustrating key features such as multiple protections, anti-corrosion anode, electrolytic sleeves, external thermometer, adjustable temperature, Incoloy 840 resistance, high-density polyurethane insulation, sapphire enamel tank, safety valve, and overheat protection.

HTW HTWTV100ESS Detailed Features

Figure 3.3: Detailed text descriptions of features including vertical installation, Incoloy 840 resistance, anti-corrosion magnesium anode, sapphire enamel steel tank, electrolytic sleeves, safety valve, external thermometer, and adjustable temperature.

4. セットアップとインストール

Installation of the HTWTV100ESS water heater should only be performed by a certified technician to ensure safety and compliance with local regulations.

4.1. 取り付け

  • This model is designed for 垂直設置. Ensure the mounting surface is strong enough to support the full weight of the water heater when filled with water (approx. 100 kg + unit weight).
  • Use appropriate mounting hardware (not included) suitable for your wall type.

4.2. 配管接続

  • Connect the cold water inlet (blue marking) and hot water outlet (red marking) to your plumbing system.
  • 付属の 圧力逃し弁 on the cold water inlet line. Ensure it is properly oriented and connected to a discharge pipe leading to an open drain. Do not install any shut-off valve between the water heater and the pressure relief valve.
  • 提供されているものを活用する electrolytic sleeves during connection to prevent galvanic corrosion between dissimilar metals in the plumbing system, thereby extending the life of the unit.
  • After connecting, slowly fill the tank with water and check for leaks before connecting to power. Open a hot water faucet to allow air to escape during filling.

4.3。 電気接続

  • 給湯器を適切な容量の専用電気回路に接続しますtage (220-240V, 50/60Hz) and overcurrent protection (1500W, 6.5A).
  • 地域の電気規則に従って適切な接地を確保してください。
  • The electrical connection should be made by a qualified electrician.

5. 操作手順

5.1.初期起動

  • 電源を入れる前に、タンクが完全に水で満たされていることを確認してください。
  • Switch on the electrical supply to the water heater. The indicator light (if present) will illuminate.

5.2.温度調整

  • The water heater features an adjustable temperature control. Locate the thermostat knob, usually at the bottom or side of the unit.
  • Turn the knob to set your desired water temperature. Higher settings will provide hotter water but consume more energy.
  • external thermometer will display the current water temperature inside the tank. Allow time for the water to heat up to the set temperature.

5.3.通常の操作

  • Once the desired temperature is reached, the heating element will cycle on and off automatically to maintain the set temperature.
  • Hot water will be available at your faucets.

6. メンテナンス

定期的なメンテナンスは、給湯器の寿命と効率的な動作を保証します。メンテナンスを行う前に、必ず電源を切ってください。

6.1. 圧力リリーフバルブのチェック

  • Test the pressure relief valve at least once a year by lifting the lever. Water should flow out of the discharge pipe. If no water flows, or if it continues to drip after the lever is released, the valve may need replacement.

6.2. Magnesium Anode Inspection/Replacement

  • anti-corrosion magnesium anode protects the tank from corrosion. Its lifespan depends on water quality. It is recommended to have a qualified technician inspect and replace the anode every 1-3 years, especially in areas with hard water.

6.3. タンクの排水

  • If the water heater will be out of use for an extended period or if there is a risk of freezing, drain the tank.
  • To drain: Disconnect power, close the cold water inlet valve, open a hot water faucet, and open the drain valve at the bottom of the water heater.

6.4. 清掃

  • 給湯器の外側を柔らかくて柔らかい布で拭いてください。amp 布で拭いてください。研磨剤や溶剤は使用しないでください。

7。 トラブルシューティング

カスタマー サービスに連絡する前に、次のトラブルシューティング ガイドを参照してください。

問題考えられる原因解決
お湯が出ない、またはお湯が足りない。
  • 電源がありません。
  • サーモスタットの設定が低すぎます。
  • 発熱体の故障。
  • Overheat protection tripped.
  • サーキットブレーカ/ヒューズを確認してください。
  • サーモスタットを高めの設定に調整します。
  • Contact a qualified technician for inspection/replacement.
  • Reset overheat protection (usually a red button, consult technician if unsure).
ユニットから水が漏れています。
  • 配管の接続が緩んでいる。
  • 圧力リリーフバルブの排出。
  • Tank corrosion (rare).
  • 接続を締めます。
  • This is normal if pressure is too high; check water pressure or test valve.
  • 資格のある技術者に連絡してください。
Unusual noises from the tank.
  • Sediment buildup.
  • Heating element issues.
  • Drain and flush the tank (consult technician).
  • 資格のある技術者に連絡してください。

8. 技術仕様

特徴仕様
ブランドホットウィール
モデルHTWTV100ESS
容量100リットル
熱出力1.5キロワット
電源Electric Cable (220-240V, 50/60Hz)
特集圧力リリーフバルブ
材料Alloy Steel (Sapphire Enamel Tank)
インストールスタイル垂直設置
ASINB0719SXWHN
HTW HTWTV100ESS Technical Specifications Table

Figure 8.1: Detailed technical specifications table for various HTW water heater models, including the 100-liter version, showing power, current, capacity, working pressure, temperature range, recovery time, insulation thickness, material, protection degree, and dimensions.

9. 保証とサポート

The HTW HTWTV100ESS water heater comes with a タンクの5年間保証, reflecting our commitment to quality. For warranty claims or technical support, please contact your retailer or the HTW customer service department.

Please have your model number (HTWTV100ESS) and purchase date available when contacting support.

For further assistance, visit the official HTW webサイトをご覧いただくか、お近くの販売店にお問い合わせください。

© 2026 HTW. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.