導入
This manual provides detailed instructions for the safe and effective use of your SUNUV UV LED Nail Lamp, model SUN7. Designed for both professional salon and home use, this lamp features advanced curing technology for various gel nail polishes. Please read this manual thoroughly before operation and retain it for future reference.
製品終了view
図1: トップダウン view of the SUNUV SUN7 UV LED Nail Lamp, highlighting its sleek design and digital display.
The SUNUV SUN7 is a professional all-in-one nail lamp equipped with 30 UVLED combined light beads. It is compatible with all types of UV gel and LED gel nail polish, including base coat, top coat, color gel, hard gels, builder gel, acrylic, sculpture gel, and gem glue.
主な機能は次のとおりです。
- Smart Nail Lamp 2.0: Auto-sensor for automatic on/off functionality.
- 99S Low Heat Mode: Provides comfortable curing for builder/hard gels.
- Double Power Key: Enables 2X faster curing for efficient use.
- 大型液晶画面： Displays curing time for precise control.
- 最適化された設計: Spacious interior accommodates 5 fingernails or toenails simultaneously.
- 過熱保護: Gradually enhances power to protect skin and prevent discomfort.
- 4 タイマー設定: Preset options for 10s, 30s, 60s, and 99s (Low Heat Mode/Double Power).
設定
- 開梱: Carefully remove the SUNUV SUN7 nail lamp and all accessories from the packaging. Ensure all components are present: the nail lamp unit and power adapter.
- 配置: Place the nail lamp on a stable, flat, and dry surface. Ensure there is adequate ventilation around the unit. Avoid placing it near water or in excessively humid environments.
- 電源接続: Connect the power adapter cable to the DC input port on the back of the nail lamp. Plug the power adapter into a suitable electrical outlet (AC 100-240V, 50/60Hz). The LCD display will illuminate, indicating the device is ready for use.
Figure 2: Illustration of the SUNUV SUN7's smart features, including automatic sensor and uniform curing.
操作手順
The SUNUV SUN7 offers multiple curing modes and smart features for optimal performance.
タイマー設定
Lamp features four preset timer buttons for convenient operation:
- 10秒: Short curing time, ideal for thin coats or quick flash cures.
- 30秒: Standard curing time for many gel polishes.
- 60秒: Longer curing time for thicker coats or specific gel types.
- 99s (Low Heat Mode / Double Power): This mode gradually increases power to prevent heat spikes, providing a comfortable curing experience, especially for sensitive nails or builder gels. Pressing the 99s button again activates Double Power mode for faster curing at higher wattage.
Figure 3: Close-up of the SUNUV SUN7's LCD display and timer buttons, illustrating the different curing options.
自動センサー動作:
Lamp is equipped with a smart infrared sensor. When you place your hand or foot into the lamp, the sensor will automatically detect it and start the curing process. The default curing time will be 120 seconds if no timer button is pressed. The lamp will automatically turn off when you remove your hand or foot.
Figure 4: Diagram illustrating the smart infrared sensor functionality of the SUNUV SUN7, showing automatic activation and deactivation.
硬化プロセス:
- Prepare your nails by cleaning and applying the base coat according to your gel polish manufacturer's instructions.
- 手または足をlに置きますamp。 lamp will turn on automatically, or you can press a desired timer button (10s, 30s, 60s, or 99s).
- The LCD display will count down the remaining curing time.
- Once the timer finishes or you remove your hand/foot, the lamp オフになります。
- Apply color gel and cure again as per the manufacturer's instructions. Repeat for additional coats.
- Finish with a top coat and cure. Wipe with alcohol or cleanser to remove any tacky layer and reveal shine.
Figure 5: Visual representation of the dual UV/LED technology in the SUNUV SUN7, ensuring efficient and durable gel curing.
Video 1: An official demonstration of the SUNUV Nail Lamp in use, showcasing its features and ease of operation for nail curing.
メンテナンス
- クリーニング： Disconnect the power adapter before cleaning. Use a soft, dry cloth to wipe the exterior of the lamp研磨剤や溶剤は使用しないでください。
- ストレージ： 使用しないときは、保管してくださいamp 直射日光や湿気を避け、涼しく乾燥した場所に保管してください。
- 電球の寿命： The 30 LED beads have a long lifespan of approximately 50,000 hours. They are designed to last the lifetime of the product and do not require replacement under normal use.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Lamp オンになりません。 | 電源アダプターが接続されていないか、コンセントに障害があります。 | 電源アダプタが両方のコンセントにしっかりと差し込まれていることを確認してください。amp 正常に機能するコンセント。別のコンセントをお試しください。 |
| Gel polish is not curing properly. | Incorrect curing time, too thick gel layer, or incompatible gel polish. |
|
| Lamp 突然電源が切れる。 | Overheating protection activated or power interruption. | lを許可するamp to cool down. Ensure proper ventilation. Check power connection for stability. |
| LCDディスプレイが動作しません。 | 内部故障です。 | サポートが必要な場合はカスタマー サポートにお問い合わせください。 |
仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | SUN7 |
| ブランド | サンUV |
| 力 | 48ワット |
| LEDの数 | 30 (UVLED combined light beads) |
| 波長 | 365nm (UV) + 405nm (LED) |
| タイマー設定 | 10s, 30s, 60s, 99s (Low Heat Mode / Double Power) |
| 画面 | LCDデジタルディスプレイ |
| センサー | Smart Infrared Sensor (Auto On/Off) |
| 材料 | アクリル |
| 製品寸法 | 21 x 9 x 21 cm |
| アイテム重量 | 810グラム |
| 巻tage | 2.3E+2 Volts (Input: AC 100-240V, 50/60Hz) |
| 含まれるコンポーネント | Bulb (integrated LEDs) |
Figure 6: Dimensions and power specifications of the SUNUV SUN7 UV LED Nail Lamp.
Figure 7: The SUNUV SUN7 features over-heating protection, ensuring comfort during the curing process.
保証とサポート
For warranty information and customer support, please refer to the product packaging or contact SUNUV customer service directly. Keep your purchase receipt as proof of purchase.
For further assistance, you may visit the official SUNUV store on Amazon: SUNUV Store.