1.製品オーバーview
The Valore 7 shower panel is designed for retrofit installation into existing shower systems that include a cold and hot faucet. It connects to an existing shower head spout. The panel body is constructed from durable 304 stainless steel, offering a modern aesthetic for bathroom upgrades.
This shower panel features a 3-way shower spray mode system, allowing for versatile water delivery options. It includes a brass shower wand with a brass shower cradle for handheld use.
Image 1.1: Valore 7 Shower Panel installed in a modern bathroom setting.
2. 安全情報
- 設置を始める前に、すべての給水管が閉じられていることを確認してください。
- 取り付け中は、安全メガネや手袋などの適切な個人用保護具を着用してください。
- 設置手順のいずれかの部分について不明な点がある場合は、資格のある配管工に相談してください。
- Do not use abrasive cleaners or harsh chemicals on the shower panel's surface, as this may damage the finish.
3. パッケージ内容
インストールを開始する前に、すべてのコンポーネントが揃っていることを確認してください。
- Shower Panel Unit
- シャワーヘッド
- Shower Wand (Handheld Shower)
- Shower Cradle for Handheld Shower
- 取り付け金具
- Flexible Hoses for Water Connection
- インストールマニュアル
4. 仕様
| 特徴 | 仕様 |
|---|---|
| ブランド | ヴァローレ |
| モデル番号 | 32c8f765-6d09-4293-9210-40320453c0bb |
| 色 | ブラシ仕上げステンレススチール |
| 材料 | 黄銅、ステンレス鋼 |
| 仕上げタイプ | ブラシ仕上げ |
| ハンドル数 | 3 |
| 取り付けタイプ | 壁掛け |
| アイテム重量 | 14.02ポンド |
| 認定資格 | UPC/c-UPC certified |
5。 外形寸法
製品の詳細な寸法については下の図を参照してください。
Image 5.1: Valore 7 Shower Panel Dimensions Diagram. All measurements are approximate.
6. インストール手順
The Valore 7 shower panel is designed for easy retrofit installation. It connects to your existing shower head spout and hot/cold water lines.
6.1インストール前
- 給水を止める: Locate and turn off the main water supply to your bathroom or entire home.
- Remove Existing Fixtures: Carefully remove your current shower head and any other fixtures that will be replaced by the shower panel.
- Inspect Plumbing: Ensure your existing hot and cold water lines are accessible and in good condition. This panel is designed for systems with existing hot and cold faucets.
- Water-Saving Regulator: If your water pressure is naturally low, consider not installing any water-saving regulator that may be included with the panel, as it can further reduce flow. If you use the hang-on to the shower pipe method, access to the regulator may be limited after installation.
6.2 パネルの取り付け
- ポジショニング: Hold the shower panel against the wall in the desired position. Mark the locations for mounting brackets. Ensure the panel is level.
- ドリル穴: マークした位置に下穴を開けます。必要に応じて壁アンカーを挿入します。
- 安全なブラケット: 付属のネジを使用して取り付けブラケットを壁に取り付けます。
- パネルアタッチメント: The unit may include double-sided tape for securing it to the wall. Once applied, repositioning is difficult without replacing the tape. Carefully align and press the panel onto the brackets and tape.
6.3 水道管の接続
- ホースを接続する: Attach the flexible hot and cold water supply hoses from the shower panel to your existing hot and cold water outlets. Ensure all connections are tight to prevent leaks.
- ハンドヘルドシャワー: Connect the handheld shower hose to its designated outlet on the panel.
- 水をオンにする: Slowly turn the main water supply back on and check for any leaks. Tighten connections as needed.
- Seal Edges (Optional but Recommended): Apply a bead of clear silicone caulk along the sides of the shower panel where it meets the tile to create a seal and prevent water intrusion.
Note: This shower panel does not include a temperature/volume control valve. Your existing shower valve will control water temperature and flow.
7. 操作手順
The Valore 7 shower panel features a 3-way diverter to control water flow to different functions.
7.1 水流制御
Use your existing shower's hot and cold water handles to adjust the desired water temperature and overall flow rate.
7.2 Selecting Spray Modes
The panel has a control knob or lever to switch between the three spray modes:
- シャワーのような雨： Provides a wide, gentle rainfall-like spray from the overhead shower head.
- ボディジェット: Delivers targeted streams of water from the integrated body massage jets.
- ハンドヘルドシャワー: Directs water flow to the brass shower wand for focused rinsing or cleaning.
Image 7.1: Valore 7 Shower Panel demonstrating the rain shower function.
Image 7.2: Valore 7 Shower Panel demonstrating the body jet function.
Rotate or move the diverter control to select your desired spray function. Only one function can be active at a time.
8. メンテナンス
8.1 クリーニング
- Clean the stainless steel surface regularly with a soft cloth and mild soap or a non-abrasive stainless steel cleaner.
- Avoid using abrasive sponges, scouring pads, or harsh chemical cleaners, as these can scratch or damage the finish.
- For hard water spots, use a solution of white vinegar and water, then rinse thoroughly.
- Periodically clean the nozzles of the shower head and body jets to remove mineral buildup. You can often do this by gently rubbing the rubber nozzles.
8.2一般的なケア
- Ensure all connections remain tight to prevent leaks.
- If any part becomes loose, gently tighten it. Do not overtighten.
9。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 水圧が低い | Water-saving regulator installed; mineral buildup in nozzles; low household water pressure. | Check if a water-saving regulator is installed and consider removing it if pressure is consistently low. Clean shower head and body jet nozzles. Consult a plumber if household pressure is generally low. |
| 接続部の漏れ | 接続が緩んでいる、ワッシャーやガスケットが摩耗している。 | Ensure all hose connections are securely tightened. Check and replace any damaged washers or gaskets. |
| ダイバータが機能を切り替えない | ミネラルの蓄積、内部機構の問題。 | Flush the system by running water through all functions. If the issue persists, contact customer support. |
10. 保証とサポート
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Valore customer service. Keep your proof of purchase for warranty claims.