1. はじめに
The Rizoma Spy R 80 Mirror is a high-quality, bar-end motorcycle mirror designed to enhance rear visibility and complement the aesthetic of your motorcycle. Featuring concave anti-glare glass and an 80mm diameter, it provides a clear and sharp view of your surroundings. This manual provides essential information for the proper installation, operation, and maintenance of your new Rizoma Spy R 80 Mirror.
2. 安全情報
Always prioritize safety when installing and using motorcycle accessories. Improper installation can lead to serious injury or damage. Please read and understand all instructions before proceeding.
- Ensure all components are securely fastened before riding. Loose parts can detach and cause accidents.
- Regularly check the mirror's mounting bolts for tightness, especially after the first few rides.
- Verify that the mirror provides adequate rear visibility from your riding position. Adjust as necessary.
- If you are unsure about any installation step, consult a qualified motorcycle mechanic.
- Do not modify the mirror or its components. Use only genuine Rizoma parts and accessories.
3. パッケージ内容
パッケージに以下のすべての項目が含まれていることを確認してください。
- 1 x Rizoma Spy R 80 Mirror (Black)
- 1 x Proguard LP200B Adapter
- Necessary mounting hardware (screws, washers, etc.)
Note: This listing is for one mirror and adapter. If you require a pair, please ensure you have ordered two units.
4. セットアップとインストール
The Rizoma Spy R 80 Mirror is designed for handlebar mounting using the included Proguard LP200B Adapter. This adapter is compatible with most handlebars that have an inside diameter of 13-21mm.
インストール手順:
- ハンドルバーの準備: If your handlebar has existing bar-end weights or mirrors, remove them. Ensure the end of the handlebar is clean and free of debris.
- 挿入アダプタ: Insert the Proguard LP200B Adapter into the end of your handlebar. The adapter is designed to expand and secure itself within the handlebar's inner diameter.
- ミラーを添付: Align the Rizoma Spy R 80 Mirror's mounting arm with the adapter. Secure the mirror to the adapter using the provided hardware. Do not fully tighten yet.
- ポジションミラー: Sit on your motorcycle and adjust the mirror's angle and position to achieve optimal rear visibility. Ensure the mirror does not interfere with controls or your hands during operation.
- 最終締め付け: Once the desired position is achieved, carefully tighten all mounting bolts. Do not overtighten, as this can damage the components. Refer to your motorcycle's service manual for specific torque specifications if available, or tighten until snug and secure.
- 適合性を確認: After installation, gently attempt to move the mirror to ensure it is firmly secured and does not wobble.
Figure 4.1: Rizoma Spy R 80 Mirror installed on a motorcycle handlebar, showing its sleek profile.
Figure 4.2: A broader view of the Rizoma Spy R 80 Mirror assembly on a handlebar, illustrating its integration with the motorcycle's controls.
Fitment Chart for LP200B Adapter:
The LP200B adapter is designed for universal fitment on handlebars with an inside diameter of 13-20mm. For specific motorcycle models and their compatibility, please refer to the chart below. If your motorcycle is not listed, measure the inside diameter of your handlebar to confirm compatibility.
Figure 4.3: Official fitment chart detailing compatible motorcycle models and handlebar inner diameters for the Proguard LP200B Adapter.
5. 操作手順
Once installed, the Rizoma Spy R 80 Mirror requires minimal operation. Its primary function is to provide clear rearward visibility.
- 調整： The mirror head can be pivoted and rotated to fine-tune your field of view. Adjust it while seated in your normal riding position to minimize blind spots.
- アンチグレア機能: The concave anti-glare glass is designed to reduce glare from headlights and sunlight, improving visibility in various lighting conditions.
6. メンテナンス
Proper maintenance will ensure the longevity and optimal performance of your Rizoma Spy R 80 Mirror.
- クリーニング： Clean the mirror glass and body with a soft, damp cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive materials that could scratch the glass or finish.
- 検査： Periodically inspect the mirror for any signs of damage, such as cracks in the glass or bends in the housing. Check all mounting points for corrosion or looseness.
- 気密性チェック: Regularly check the tightness of the mounting bolts, especially after riding on rough terrain or after significant temperature changes.
7。 トラブルシューティング
If you encounter issues with your Rizoma Spy R 80 Mirror, refer to the following common problems and solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Mirror vibrates excessively | Loose mounting bolts; improper adapter fitment; engine vibration | Ensure all bolts are tightened securely. Verify the LP200B adapter is correctly seated and expanded within the handlebar. Some engine vibration is normal, but excessive vibration may indicate a loose component. |
| Poor rear visibility | Incorrect mirror angle; obstruction | Adjust the mirror head to optimize your field of view. Ensure no part of your body or motorcycle is obstructing the mirror's surface. |
| Mirror feels loose after installation | Mounting bolts not sufficiently tightened; adapter not fully expanded | Re-tighten all mounting bolts. Ensure the LP200B adapter is properly installed and expanded to create a secure fit within the handlebar. |
8. 仕様
Key technical specifications for the Rizoma Spy R 80 Mirror:
- ブランド： リゾマ
- モデル： BS285B
- 色： 黒
- ミラー直径： 80mm
- 取り付けタイプ: Handlebar Mount (Bar-End)
- アダプタの互換性: Handlebars with 13-21mm inside diameter (Proguard LP200B Adapter included)
- ミラー形状： ラウンド
- レンズ曲率: Concave, Anti-Glare
- 商品の重量: 約1.11ポンド（0.5kg）
- メーカー: リゾマ
Figure 8.1: Detailed technical drawing showing the dimensions of the Rizoma Spy R 80 Mirror and its adapter.
9. 保証とサポート
For information regarding the product warranty, please refer to the documentation provided with your purchase or visit the official Rizoma webサイトをご覧ください。保証条件は地域や販売店によって異なる場合があります。
If you require technical support, have questions about installation, or need assistance with a defective product, please contact the authorized Rizoma dealer or the point of purchase. Provide your product model number (BS285B) and purchase details when seeking support.
For general inquiries, you may also visit the official Rizoma webサイト： www.rizoma.com