Flashpoint Photo/Video 13インチ調光LEDライトリング ユーザーマニュアル

導入

This user manual provides essential information for the safe and effective operation of your Flashpoint 13-inch Dimmable LED Light Ring. Designed for photo and video applications, this light ring offers optimal brightness control and accurate color rendering for various content creation needs, including makeup tutorials, live streaming, and general photography.

製品を使用する前にこのマニュアルをよくお読みになり、今後の参考のために保管してください。

安全情報

• 電気安全: Ensure the power adapter is connected to a compatible AC 120V, 50/60Hz power source. Do not operate with wet hands or in damp 条件。
• 換気： Do not cover the ventilation openings on the light ring's housing. Adequate airflow is necessary to prevent overheating.
• 取り扱い： Handle the light ring with care. Avoid dropping or subjecting it to strong impacts.
• 耐水性: この商品は 耐水性はありません水や高湿度にさらさないでください。
• 目の保護: Do not look directly into the illuminated LED lights for extended periods, as this may cause eye strain.
• 子供たち： お子様の手の届かない場所に保管してください。

パッケージ内容

パッケージにすべてのアイテムが含まれていることを確認します。

• Flashpoint 13-inch Dimmable LED Light Ring
• AC電源アダプター
• キャリーバッグ
• Color Filter Covers (for muted or orange color temperature adjustment)

設定

1. Mounting the Light Ring: The Flashpoint LED Ring Light is designed to be mounted on a standard 5/8" light stand (light stand not included). Securely attach the light ring to the top of your light stand.
2. 電源接続: Locate the AC power input on the back of the light ring. Connect the provided AC power adapter to this input. Ensure the connection is firm. Plug the other end of the power adapter into a suitable wall outlet.
3. Optional Color Filters: If desired, attach the included color filter covers to the front of the light ring to adjust the color temperature for specific lighting effects or skin tones.

Figure 1: The Flashpoint LED Ring Light mounted on a stand, illustrating its general setup and key features. Note: Light stand is not included.

図2：詳細 view of the secure power connector, ensuring a stable power supply to the light ring.

操作手順

1. 電源オン/オフ: Locate the "Power ON/OFF" knob on the back of the light ring. Rotate the knob clockwise to turn the light on. Rotate it counter-clockwise until it clicks to turn the light off.
2. 明るさの調整（調光器）: Once powered on, continue rotating the same knob clockwise to increase the brightness (10-100%). Rotate it counter-clockwise to dim the light. This stepless dimming feature allows for precise control over illumination.
3. 光の角度を調整する: The light ring features an adjustable mounting bracket. Loosen the locking knob on the bracket, tilt the light ring to your desired angle, and then tighten the knob to secure its position.

Figure 3: The control panel on the back of the light ring, featuring the power and dimmer knob.

図4：詳細 view of the stepless dimmer knob for precise brightness adjustment.

Figure 5: The adjustable mounting bracket allows for flexible positioning of the light.

メンテナンス

• クリーニング： Disconnect the power before cleaning. Use a soft, dry cloth to wipe the exterior of the light ring. Do not use abrasive cleaners or solvents.
• ストレージ： When not in use, store the light ring in its provided carrying bag in a cool, dry place, away from direct sunlight and moisture.
• LEDケア: Avoid touching the LED bulbs directly. If dust accumulates on the LEDs, gently clean with a soft, lint-free cloth.

Figure 6: The light ring fits securely into its carrying bag for protection and transport.

Figure 7: The durable carrying bag provides convenient storage and portability.

トラブルシューティング

仕様

保証とサポート

For warranty information or technical support, please refer to the warranty card included with your product or visit the official Flashpoint website. You may also contact Flashpoint customer service directly for assistance with product inquiries, troubleshooting, or replacement parts.

オンラインサポート： www.flashpointlighting.com/support