iFlight 43234-1976

iFlight 2.4G Receiver Antenna (150mm, IPEX 4) Instruction Manual

モデル:43234-1976

導入

This manual provides essential information for the proper installation, operation, and maintenance of your iFlight 2.4G Receiver Antenna. This antenna is designed for use with compatible FrSky receivers and remote controllers, featuring a 150mm length and an IPEX 4 connector.

製品の最適なパフォーマンスと寿命を確保するために、使用前にこれらの手順をよくお読みください。

製品の特徴

  • コネクタタイプ: 2.4G receiver antenna with IPEX 4 Generation connector.
  • 長さ: 5.9 inches (150mm) total length.
  • 材料: RF113 Silver plated Wire Material for enhanced signal transmission.
  • パフォーマンス: Precision machining ensures low loss signal stability and high sensitivity.
  • 互換性: Specifically designed for FrSky XM+, X4R, and X4R-SB receivers, including mini versions.

パッケージ内容

The package contains 20 pieces of iFlight 150mm 2.4G Receiver Antennas.

A bundle of iFlight 2.4G receiver antennas with IPEX 4 connectors.

Image: A bundle of iFlight 2.4G receiver antennas, showcasing the IPEX 4 connectors and the overall design.

セットアップとインストール

  1. コネクタタイプを識別します: Ensure your receiver uses an IPEX 4 port. This antenna is designed for the smaller IPEX 4 connector. Refer to the comparison image below.
  2. Comparison image showing the 'new version IPEX4' connector next to a 'regular version IPEX (bigger port)'.

    Image: A side-by-side comparison of the new IPEX 4 connector (smaller) and a regular IPEX connector (larger port), highlighting the difference.

  3. 受信機に接続します: Carefully align the IPEX 4 connector of the antenna with the corresponding port on your FrSky receiver. Apply gentle, even pressure until you feel a distinct "snap," indicating a secure connection.
  4. アンテナの配置: For optimal signal reception, position the antenna away from carbon fiber frames, metal objects, and other electronic components that may cause interference. Ensure the active element (the exposed wire tip) is not obstructed.
  5. セキュアアンテナ: Use heat shrink tubing, zip ties, or appropriate mounting solutions to secure the antenna in place, preventing it from moving during flight or operation. Avoid sharp bends or kinks in the antenna wire.
A FrSky receiver with an iFlight 2.4G receiver antenna connected.

Image: A FrSky receiver with an iFlight 2.4G receiver antenna properly connected. Note: The receiver is for reference only and not included with the antenna pack.

操作手順

Once the antenna is securely connected and properly positioned, the receiver will utilize it for 2.4G signal reception from your remote controller. No specific operational steps are required for the antenna itself beyond proper installation.

Always perform a range check before operating your RC model to ensure reliable signal strength and control. Consult your receiver's manual for specific binding and range testing procedures.

メンテナンス

  • 定期点検: Periodically inspect the antenna wire and connector for any signs of damage, fraying, or corrosion.
  • 清潔さ: Keep the antenna free from dirt, dust, and moisture. Use a soft, dry cloth for cleaning if necessary.
  • ストレージ: When not in use, store the antennas in a dry, cool place, protected from physical damage.
  • 交換: If the antenna wire is cut, bent severely, or the connector is damaged, replace it immediately with a new iFlight 2.4G Receiver Antenna to maintain signal integrity.

トラブルシューティング

Problem: Poor Signal / Frequent Failsafes
  • 接続を確認してください: Ensure the antenna is securely connected to the receiver's IPEX 4 port. A loose connection can severely degrade signal quality.
  • アンテナの配置: Verify that the antenna is positioned optimally, away from obstructions and interference sources. Ensure the active element is exposed.
  • アンテナの損傷: Inspect the antenna for any physical damage. Even minor cuts or kinks can affect performance. Replace if damaged.
  • 受信機の問題: If multiple antennas show similar issues, the problem might lie with the receiver itself or the remote controller. Consult their respective manuals.
Problem: Antenna Does Not Fit
  • Verify Connector Type: This antenna uses an IPEX 4 (smaller) connector. If your receiver requires a larger IPEX (U.FL) connector, this antenna will not be compatible. Double-check your receiver's specifications.

仕様

パラメータ 価値
モデル番号 43234-1976
アンテナタイプ 2.4G Receiver Antenna
コネクタタイプ IPEX 4 Generation
長さ 150mm(5.9インチ)
ワイヤー材質 RF113 Silver plated
インピーダンス 50オーム
周波数範囲 2400 - 2500 MHz
SWR <= 2.0
2
動作温度 -40℃~+65℃
保管温度 -40℃~+80℃
Item Weight (per antenna) Approximately 0.5g (as shown in product images)
An iFlight 2.4G receiver antenna laid out next to a ruler, indicating its 150mm length.

Image: The 150mm length of the antenna measured against a ruler.

An iFlight 2.4G receiver antenna coiled on a digital scale, showing a weight of 0.5g.

Image: A single antenna on a digital scale, displaying a weight of 0.5 grams.

公式製品ビデオ

Video: This official video demonstrates the 2.4G Receiver Antenna, highlighting its features and compatibility with Futaba and FrSky systems. (Duration: 0:24)

保証とサポート

For warranty information and technical support, please refer to the official iFlight web販売店のウェブサイトをご覧いただくか、カスタマーサービスに直接お問い合わせください。具体的な保証条件は、地域や販売店によって異なる場合があります。

© 2026 iFlight. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.