VOX BC108

VOX BC108 Black Cab Series Amplifierキャビネット

取扱説明書

1. はじめに

The VOX BC108 Black Cab Series Amplifier Cabinet is a compact and portable speaker cabinet designed to deliver quality sound for guitar amplification. Featuring an 8-inch speaker and 25 Watts of power handling, it is ideal for practice, studio use, and small venues. This manual provides essential information for the safe and effective use of your BC108 cabinet, ensuring optimal performance and longevity.

VOX BC108 Black Cab Series Amplifier Cabinet, front view

図1: 前面 view of the VOX BC108 Amplifier Cabinet.

2. 安全上の注意

To prevent electric shock, fire, or damage to the unit, please read and follow all instructions carefully.

  • 電源: This cabinet is passive and does not require direct power. Ensure any connected amplifier is properly grounded and uses the correct voltage.
  • 換気: Do not block any ventilation openings. Ensure adequate airflow around the cabinet.
  • 水と湿気: 本製品を雨、湿気、または過度の湿度にさらさないでください。液体の入った物を本製品の上または近くに置かないでください。
  • 熱: ユニットをラジエーター、暖房送風口、ストーブ、その他の熱を発生する装置などの熱源から遠ざけてください。
  • クリーニング: 乾いた布でのみ拭いてください。 液体クリーナーやエアロゾルクリーナーは使用しないでください。
  • サービス: この製品を自分で修理しようとしないでください。 すべてのサービスを資格のあるサービス担当者に依頼してください。
  • 配置: Place the cabinet on a stable, level surface to prevent it from falling.
  • スピーカーケーブル: Use high-quality speaker cables with appropriate gauge for connections to prevent signal loss or damage.

3. パッケージ内容

パッケージにすべてのアイテムが揃っていることを確認します。

  • VOX BC108 Amplifierキャビネット
  • Speaker Cable (may vary by region/retailer)
  • 取扱説明書(本書)

4. セットアップ

Follow these steps to set up your VOX BC108 amplifier cabinet:

  1. 配置: Position the BC108 cabinet on a stable surface. For optimal sound projection, consider placing it on the floor or on a sturdy stand.
  2. 接続中 Amplifier Head:

    Locate the speaker output jack on your amplifier head and one of the input jacks on the rear of the BC108 cabinet. Use a high-quality speaker cable to connect these two points. Ensure both the amplifier and the cabinet are powered off before making connections.

    VOX BC108 with MV50 amplifier head on top

    Figure 2: The BC108 cabinet paired with an MV50 ampリファイアヘッド。

    後方 view of VOX BC108 showing parallel speaker jacks

    Figure 3: Rear panel of the BC108, illustrating the parallel speaker jacks.

  3. インピーダンスマッチング: The BC108 has an impedance of 8 Ohms. Ensure your amplifier head's output impedance setting matches or is compatible with the cabinet's impedance to prevent damage to your amplifier。
  4. Parallel Speaker Jacks: The BC108 features two parallel speaker jacks. One jack serves as the input from your amplifier, and the other can be used to connect an additional speaker cabinet in parallel. When connecting two 8-Ohm cabinets in parallel, the total impedance presented to the amplifier will be 4 Ohms. Ensure your amplifier can safely operate at this lower impedance.

5. 操作

The BC108 is a passive speaker cabinet and its operation is directly controlled by the connected ampリファイアヘッド。

  • 電源オン/オフ: 電源を入れる amplifier head after all connections are securely made. Turn off the amplifier head before disconnecting any cables.
  • 音量コントロール: Adjust the volume and tone settings directly on your ampリファイアヘッド。
  • Daisy-Chaining (Connecting Multiple Cabinets): If you wish to connect a second 8-Ohm cabinet, use a speaker cable to connect the second parallel jack on the BC108 to the input of the additional cabinet. Remember that this configuration will result in a 4-Ohm load for your amplifier。
  • Two VOX BC108 cabinets stacked with an MV50 ampリファイアヘッド

    Figure 4: Two BC108 cabinets stacked, demonstrating a potential multi-cabinet setup.

6. メンテナンス

Proper maintenance ensures the longevity and performance of your BC108 cabinet.

  • クリーニング: Wipe the exterior of the cabinet with a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish.
  • ストレージ: When not in use for extended periods, store the cabinet in a dry, temperature-controlled environment, away from direct sunlight and extreme temperatures.
  • 検査: スピーカーケーブルに摩耗や損傷の兆候がないか定期的に点検してください。損傷したケーブルはすぐに交換してください。

7。 トラブルシューティング

If you encounter issues with your BC108 cabinet, refer to the following common problems and solutions:

問題考えられる原因解決
No sound from cabinet.
  • Ampライファイアの電源が入っていません。
  • スピーカー ケーブルの接続が正しくないか、緩んでいます。
  • スピーカーケーブルが破損しています。
  • Amplifier output impedance mismatch.
  • 確保する ampライターの電源がオンになっていて機能しています。
  • スピーカーケーブルの接続を両側で確認してください。 ampライターとキャビネット。
  • Try a different speaker cable.
  • 確認する amplifier output impedance matches cabinet (8 Ohms, or 4 Ohms for two cabinets).
音が歪んだり弱くなったりする。
  • Ampライファイアの容量が多すぎます。
  • スピーカーが破損しています。
  • インピーダンス整合が正しくありません。
  • 不良品 amplifier。
  • 減らす ampリファイアボリューム。
  • Test with another known-good speaker cabinet if possible.
  • Confirm impedance settings.
  • テスト amplifier with another speaker or headphones to isolate the issue.
断続的な音。
  • Loose speaker cable connection.
  • スピーカーケーブルが破損しています。
  • Securely re-seat all speaker cable connections.
  • Replace the speaker cable.

If the problem persists after attempting these solutions, please contact VOX customer support or a qualified service technician.

8. 仕様

ブランドヴォックス
モデル名BC108
スピーカーサイズ8インチ
パワーハンドリング25ワット
インピーダンス8オーム
入出力ジャック2 x Parallel Speaker Jacks
アイテム重量9.7ポンド(約4.4kg)
エンクロージャ材質ステンレス鋼
メーカーコルグUSA株式会社

9. 保証情報

The VOX BC108 Amplifier Cabinet comes with a 1年間の限定保証 from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, modification, unauthorized repair, or normal wear and tear.

For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official VOX webサイト。

10. カスタマーサポート

If you have any questions, require technical assistance, or need to arrange for service, please contact VOX customer support:

  • Webサイト: Visit the official VOX webFAQ、サポート リソース、連絡先情報が記載されたサイトです。
  • 接触: Refer to the contact section on the VOX web電話番号またはメールによるサポートについては、こちらのサイトをご覧ください。
  • ディーラー: Contact your authorized VOX dealer for local support and service options.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.