VIVO STAND-V001O Mechanical Counterbalance Height Adjustable Desk Mount

製品終了view

The VIVO STAND-V001O is a mechanical counterbalance desk mount designed to elevate your monitor to an ergonomic height and allow for easy adjustment of viewing angles. This versatile mount supports flat and curved screens ranging from 17 to 32 inches and weighing up to 9 kg (19.8 lbs). It features a high-quality construction, flexible joints, integrated cable management, and offers both robust C-clamp and grommet mounting options to transform your workspace.

Image: The VIVO STAND-V001O mechanical counterbalance monitor arm, showcasing C-clの両方amp and grommet mounting bases.

セットアップとインストール

Before beginning installation, ensure all components are present and undamaged. The STAND-V001O offers two primary mounting methods: C-clamp and grommet. Choose the method best suited for your desk.

互換性チェック

• モニターサイズ: Compatible with most flat and curved screens from 17 to 32 inches.
• 重量容量: 2 kg (4.4 ポンド) ～ 9 kg (19.8 ポンド) のモニターをサポートします。
• VESAパターン: Supports VESA mounting patterns of 75x75mm and 100x100mm.
• デスクの厚さ: C-clamp and grommet mount are suitable for desks up to 8.4 cm (3.3 inches) thick.

Image: A visual guide illustrating the monitor arm's compatibility with 17-32 inch screens, VESA 75x75mm and 100x100mm patterns, and a weight capacity of 4.4-19.8 lbs (2-8.98 kg).

ステップバイステップのインストール

All necessary hardware and step-by-step instructions are provided for a smooth installation process. The open VESA plate design facilitates easy monitor attachment.

1. Clamp Base to Desk: 選択したマウントベース（C-cl）をしっかりと取り付けますamp or grommet) to your desk. Ensure it is tightened firmly to prevent movement.
2. アームを取り付ける: Insert the monitor arm into the base. It should slide in smoothly and lock into place.
3. マウントモニター: Attach your monitor to the VESA plate on the arm. The open VESA plate allows for easy alignment and securing of the monitor.
4. 張力を調整する: Use the provided Allen key to adjust the tension of the mechanical spring arm. This ensures the monitor stays in its desired position and can be moved with appropriate effort. Adjust clockwise to increase tension for heavier monitors, and counter-clockwise to decrease tension for lighter monitors.

Image: A four-panel illustration detailing the installation steps: 1. Clamping the base to the desk, 2. Attaching the arm to the base, 3. Mounting the monitor to the VESA plate, and 4. Adjusting the arm tension.

モニターアームの操作

The VIVO STAND-V001O provides extensive articulation and mechanical spring adjustment for optimal monitor positioning, allowing you to free up valuable desk space.

モニターの位置を調整する

• 高さ調整: The arm allows for a height adjustment range of 6.25 inches to 16 inches from the desk surface.
• The mounting plate offers a tilt range of +90° to -90°, allowing you to angle your screen up or down.
• スイベル: The arm can swivel 180° at the base and the monitor plate can swivel 180°, providing flexible view角度を変える。
• 回転： The monitor can be rotated 360° for landscape or portrait orientation.
• 拡大： The arm has a maximum extension of 19.75 inches and can retract to a minimum extension of 3 inches from the mounting pole.

Image: A detailed diagram illustrating the monitor arm's range of motion, including height adjustment from 6.25" to 16", tilt from +90° to -90°, maximum extension of 19.75", and minimum extension of 3".

Image: A person seated at a desk, freely adjusting a monitor mounted on the VIVO arm, highlighting the 180° swivel and 360° rotation capabilities.

ケーブル管理

The STAND-V001O features integrated cable management channels to keep your workspace tidy and cables out of sight. Route your monitor and power cables through these channels for a clean setup.

Image: A monitor arm with a monitor attached, showing how cables are neatly routed through the built-in cable management channels for a clutter-free desk.

メンテナンス

Regular maintenance ensures the longevity and optimal performance of your VIVO STAND-V001O monitor arm.

• クリーニング： アームとベースを柔らかくて乾いた布で拭いてください。amp 布で拭いてください。仕上げを傷める可能性のある研磨剤入りの洗剤や溶剤は使用しないでください。
• 接続を確認してください: すべてのネジとボルト、特にマウントをデスクに固定するネジとボルト、およびモニターを VESA プレートに固定するネジとボルトがしっかりと締められているかどうかを定期的に確認してください。
• 張力調整: If your monitor begins to sag or is difficult to move, re-adjust the tension of the mechanical spring arm as described in the "Setup and Installation" section.

トラブルシューティング

このセクションでは、モニター アームで発生する可能性のある一般的な問題について説明します。

Monitor Sags or Does Not Hold Position

• 解決： The tension of the mechanical spring arm may be too low for your monitor's weight. Use the provided Allen key to increase the tension (turn clockwise) until the monitor holds its position firmly. Refer to the "Adjust Tension" step in the Setup section.

Arm Wobbles or Feels Unstable

• 解決： C-clを確認するamp or grommet mount is securely tightened to the desk. Check all connection points on the arm and VESA plate to ensure screws are snug. Over-tightening the main desk bolt can sometimes cause slight pivoting if not properly aligned, ensure it is firm but not excessively forced.

Missing Parts Upon Arrival

• 解決： Carefully check all packaging materials. If a critical component is missing, contact VIVO customer support immediately for assistance.

仕様

保証とサポート

The VIVO STAND-V001O mechanical arm design is covered by a 3年間のメーカー保証. VIVO is committed to providing friendly technical support to assist you with any questions or concerns regarding your product.

For technical assistance, troubleshooting, or warranty claims, please visit the official VIVO webご購入の際は、ウェブサイトをご覧いただくか、カスタマーサービスまでお問い合わせください。保証の対象となる購入証明として、購入レシートを保管してください。